diff mbox

[11/12] ARM: S3C24XX: convert s3c2410 to common clock framework

Message ID 201312131403.15114.heiko@sntech.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stuebner Dec. 13, 2013, 1:03 p.m. UTC
Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.

As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm/mach-s3c24xx/Kconfig           |    4 ++--
 arch/arm/mach-s3c24xx/common.c          |    2 --
 arch/arm/mach-s3c24xx/mach-amlm5900.c   |    9 +++++++--
 arch/arm/mach-s3c24xx/mach-bast.c       |   10 +++++++---
 arch/arm/mach-s3c24xx/mach-h1940.c      |   10 +++++++---
 arch/arm/mach-s3c24xx/mach-n30.c        |   12 ++++++++----
 arch/arm/mach-s3c24xx/mach-nexcoder.c   |    7 +------
 arch/arm/mach-s3c24xx/mach-otom.c       |   10 +++++++---
 arch/arm/mach-s3c24xx/mach-qt2410.c     |    9 +++++++--
 arch/arm/mach-s3c24xx/mach-smdk2410.c   |    9 +++++++--
 arch/arm/mach-s3c24xx/mach-tct_hammer.c |    9 +++++++--
 arch/arm/mach-s3c24xx/mach-vr1000.c     |   10 +++++++---
 12 files changed, 67 insertions(+), 34 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index c06197f..12a2f6d 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -37,10 +37,10 @@  comment "S3C24XX SoCs"
 config CPU_S3C2410
 	bool "SAMSUNG S3C2410"
 	default y
-	depends on SAMSUNG_CLOCK
+	select COMMON_CLK
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index cf00c4a..29f5812 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -74,7 +74,6 @@  static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410_init,
 		.name		= name_s3c2410
@@ -83,7 +82,6 @@  static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410002,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index e27b5c9..ebe06ad 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -160,11 +160,16 @@  static struct platform_device *amlm5900_devices[] __initdata = {
 static void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 #ifdef CONFIG_FB_S3C2410
 static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
 	.width		= 160,
@@ -240,6 +245,6 @@  MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= amlm5900_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index d5d67c5..a1323bc 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -49,7 +49,6 @@ 
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -580,11 +579,16 @@  static void __init bast_map_io(void)
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init bast_init(void)
 {
 	register_syscore_ops(&bast_pm_syscore_ops);
@@ -612,6 +616,6 @@  MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= bast_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 952b6a0..873e452 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -55,7 +55,6 @@ 
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
@@ -645,7 +644,6 @@  static struct platform_device *h1940_devices[] __initdata = {
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -661,6 +659,12 @@  static void __init h1940_map_io(void)
 	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init h1940_reserve(void)
 {
@@ -738,6 +742,6 @@  MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= h1940_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 2cb46c3..8c9fa09 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -44,7 +44,6 @@ 
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/regs-serial.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -534,11 +533,16 @@  static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	n30_hwinit();
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
@@ -590,7 +594,7 @@  MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
@@ -601,7 +605,7 @@  MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 9ece48a..c594071 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -141,12 +141,7 @@  static void __init nexcoder_map_io(void)
 
 static void __init nexcoder_init_time(void)
 {
-	/*
-	 * for whatever reason the nexcoder called s3c24xx_init_clocks(0)
-	 * meaning a xti value of 0Hz, so this machine will most likely
-	 * not work out of the box and needs a fixup.
-	 */
-	s3c2440_init_clocks(0);
+	s3c2440_init_clocks(12000000);
 	samsung_timer_init();
 }
 
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 7e16b07..889f7d7 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -29,7 +29,6 @@ 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
@@ -100,11 +99,16 @@  static struct platform_device *otom11_devices[] __initdata = {
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init otom11_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@  MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= otom11_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index f8feaea..96fcf08 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -303,11 +303,16 @@  __setup("tft=", qt2410_tft_setup);
 static void __init qt2410_map_io(void)
 {
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init qt2410_machine_init(void)
 {
 	s3c_nand_set_platdata(&qt2410_nand_info);
@@ -345,6 +350,6 @@  MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= qt2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index a773789..c961e50 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -99,11 +99,16 @@  static struct platform_device *smdk2410_devices[] __initdata = {
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2410_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@  MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 7fad8f0..3d6afe7 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -135,11 +135,16 @@  static struct platform_device *tct_hammer_devices[] __initdata = {
 static void __init tct_hammer_map_io(void)
 {
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init tct_hammer_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@  MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= tct_hammer_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 8221988..443c74e 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -41,7 +41,6 @@ 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
@@ -336,11 +335,16 @@  static void __init vr1000_map_io(void)
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -361,6 +365,6 @@  MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= vr1000_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END