diff mbox

[v4,14/24] drm/i2c: tda998x: always enable EDID read IRQ

Message ID 20140125181438.70217759@armhf (mailing list archive)
State New, archived
Headers show

Commit Message

Jean-Francois Moine Jan. 25, 2014, 5:14 p.m. UTC
There is no need to enable/disable EDID read IRQ at each EDID block
read. This patch enables the IRQ at init time.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
 drivers/gpu/drm/i2c/tda998x_drv.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 0231e44..967f9ce 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -977,9 +977,6 @@  read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk)
 	uint8_t offset, segptr;
 	int ret, i;
 
-	/* enable EDID read irq: */
-	reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
-
 	offset = (blk & 1) ? 128 : 0;
 	segptr = blk / 2;
 
@@ -1014,8 +1011,6 @@  read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk)
 		return ret;
 	}
 
-	reg_clear(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
-
 	return 0;
 }
 
@@ -1234,6 +1229,9 @@  tda998x_encoder_init(struct i2c_client *client,
 	cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL,
 			CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
 
+	/* enable EDID read irq: */
+	reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
+
 	if (!np)
 		return 0;		/* non-DT */