===================================================================
@@ -2,8 +2,9 @@
* Koelsch board support
*
* Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -116,6 +117,17 @@ static const struct resource ether_resou
DEFINE_RES_IRQ(gic_spi(162)),
};
+static const struct platform_device_info ether_info __initconst = {
+ .parent = &platform_bus,
+ .name = "r8a7791-ether",
+ .id = -1,
+ .res = ether_resources,
+ .num_res = ARRAY_SIZE(ether_resources),
+ .data = ðer_pdata,
+ .size_data = sizeof(ether_pdata),
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
/* LEDS */
static struct gpio_led koelsch_leds[] = {
{
@@ -426,10 +438,7 @@ static void __init koelsch_add_standard_
ARRAY_SIZE(koelsch_pinctrl_map));
r8a7791_pinmux_init();
r8a7791_add_standard_devices();
- platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
- ether_resources,
- ARRAY_SIZE(ether_resources),
- ðer_pdata, sizeof(ether_pdata));
+ platform_device_register_full(ðer_info);
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&koelsch_leds_pdata,
sizeof(koelsch_leds_pdata));
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and 'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing ability. Currently, the code works without DMA masks but as we would have to enable CONFIG_HIGHMEM to access the full board memory in the future, when support for NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks should start to matter... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- arch/arm/mach-shmobile/board-koelsch.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)