diff mbox

ARM: shmobile: Make use of r8a7790_add_standard_devices()

Message ID 20140224054907.1803.88038.sendpatchset@w520 (mailing list archive)
State New, archived
Headers show

Commit Message

Magnus Damm Feb. 24, 2014, 5:49 a.m. UTC 
From: Magnus Damm <damm@opensource.se>

Move non-PFC and non-GPIO devices off from r8a7790_pinmux_init()
and into r8a7790_add_standard_devices() which is the normal place
to keep regular devices in the legacy case.

Signed-off-by: Magnus Damm <damm@opensource.se>
---

 arch/arm/mach-shmobile/setup-r8a7790.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Simon Horman March 7, 2014, 2:38 a.m. UTC | #1 
On Mon, Feb 24, 2014 at 02:49:07PM +0900, Magnus Damm wrote:
> From: Magnus Damm <damm@opensource.se>
> 
> Move non-PFC and non-GPIO devices off from r8a7790_pinmux_init()
> and into r8a7790_add_standard_devices() which is the normal place
> to keep regular devices in the legacy case.
> 
> Signed-off-by: Magnus Damm <damm@opensource.se>

Thanks, I have queued this up.
diff mbox

Patch

--- 0009/arch/arm/mach-shmobile/setup-r8a7790.c
+++ work/arch/arm/mach-shmobile/setup-r8a7790.c	2014-02-24 14:15:51.000000000 +0900
@@ -185,12 +185,6 @@  void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
-	r8a7790_register_i2c(0);
-	r8a7790_register_i2c(1);
-	r8a7790_register_i2c(2);
-	r8a7790_register_i2c(3);
-	r8a7790_register_audio_dmac(0);
-	r8a7790_register_audio_dmac(1);
 }
 
 #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq)		\
@@ -308,6 +302,12 @@  void __init r8a7790_add_standard_devices
 	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
+	r8a7790_register_audio_dmac(0);
+	r8a7790_register_audio_dmac(1);
 }
 
 void __init r8a7790_init_early(void)