[2/2] ARM: shmobile: henninger: add Ether DT support

Commit Message

Sergei Shtylyov April 24, 2014, 10:44 p.m. UTC

Define the Henninger board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.

Signed-off-by: Sergei Shtylyov <[e-mail]>

---
 arch/arm/boot/dts/r8a7791-henninger.dts |   28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

Patch

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -21,7 +21,7 @@ 
 	};
 
 	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel";
+		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
 
 	memory@40000000 {
@@ -40,6 +40,16 @@ 
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
 	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
 };
 
 &scif0 {
@@ -48,3 +58,19 @@ 
 
 	status = "okay";
 };
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "ok";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};