diff mbox

micrel phy: fix typo in define, point people to device tree

Message ID 20140707210353.GA29415@amd.pavel.ucw.cz (mailing list archive)
State New, archived
Headers show

Commit Message

Pavel Machek July 7, 2014, 9:03 p.m. UTC
There's typo "SCEW" in some defines, which made my greps fail and
confused me a lot. Plus, Dinh Nguyen pointed out that direct phy
accesses from board files should no longer be needed -- device tree
should be able to configure skew.

Signed-off-by: Pavel Machek <pavel@denx.de>
diff mbox

Patch

diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 075ec05..528d3ce 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -50,12 +50,15 @@  static int ksz9021rn_phy_fixup(struct phy_device *phy)
 {
 	int value;
 
+	/* Should probably use dts to configure skew, see 
+	   micrel-ksz90x1.txt */
+
 	/* Set delay values */
-	value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
+	value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SKEW | 0x8000;
 	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0xF2F4;
 	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
-	value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
+	value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SKEW | 0x8000;
 	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0x2222;
 	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index e60456d..fa6c7ad 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -42,18 +42,19 @@ 
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
+	/* Should probably use dt to set these, see micrel-ksz90x1.txt */
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
-			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
+			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SKEW);
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
 
 		/* max rx/tx clock delay, min rx/tx control delay */
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
-			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SKEW);
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
 		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
-			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SKEW);
 	}
 
 	return 0;
--- a/include/linux/micrel_phy.h
+++ b/include/linux/micrel_phy.h
@@ -38,9 +38,12 @@ 
 /* struct phy_device dev_flags definitions */
 #define MICREL_PHY_50MHZ_CLK	0x00000001
 
+/* These probably should not be exported; see micrel-ksz90x1.txt on
+   how to configure skew from device tree. */
 #define MICREL_KSZ9021_EXTREG_CTRL	0xB
 #define MICREL_KSZ9021_EXTREG_DATA_WRITE	0xC
-#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW	0x104
-#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW	0x105
+#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SKEW	0x104
+#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SKEW	0x105
+#define MICREL_KSZ9021_RGMII_TX_DATA_PAD_SKEW	0x106
 
 #endif /* _MICREL_PHY_H */