===================================================================
@@ -1030,6 +1030,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
};
pci1: pci@ee0d0000 {
@@ -1050,6 +1064,20 @@
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
};
pciec: pcie@fe000000 {
Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- This patch is against 'renesas-devel-v3.16-rc5-20140722' tag of Simon Horman's 'renesas.git' repo plus R8A7791/Koelsch/Henninger USB PHY support patches posted before. The patch requires the USB PHY driver, and USB HCD generic PHY support (also already posted) in order to work. Changes in version 3: - adjusted "phys" properties in the PCI OHCI/EHCI device nodes; - resolved rejects. Changes in version 2: - renamed the PCI OHCI/EHCI device nodes to comply with the PCI binding; - changed the PHY specifier in the PCI#1 node to reflect that channel #1 support was dropped; - resolved rejects. arch/arm/boot/dts/r8a7791.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)