@@ -140,6 +140,7 @@ sitronix Sitronix Technology Corporation
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
solidrun SolidRun
+sony Sony Corporation
spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
@@ -1088,33 +1088,33 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-keystone/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clk/keystone/
ARM/TEXAS INSTRUMENT KEYSTONE ClOCKSOURCE
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/clocksource/timer-keystone.c
ARM/TEXAS INSTRUMENT KEYSTONE RESET DRIVER
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/power/reset/keystone-reset.c
ARM/TEXAS INSTRUMENT AEMIF/EMIF DRIVERS
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/memory/*emif*
@@ -2062,17 +2062,14 @@ F: arch/arm/configs/bcm_defconfig
F: drivers/mmc/host/sdhci-bcm-kona.c
F: drivers/clocksource/bcm_kona_timer.c
-BROADCOM BCM2835 ARM ARCHICTURE
+BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
-F: arch/arm/mach-bcm/board_bcm2835.c
-F: arch/arm/boot/dts/bcm2835*
-F: arch/arm/configs/bcm2835_defconfig
-F: drivers/*/*bcm2835*
+N: bcm2835
-BROADCOM BCM5301X ARM ARCHICTURE
+BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
L: linux-arm-kernel@lists.infradead.org
S: Maintained
@@ -6686,7 +6683,7 @@ F: arch/arm/*omap*/usb*
OMAP GPIO DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
M: Kevin Hilman <khilman@deeprootsystems.com>
L: linux-omap@vger.kernel.org
S: Maintained
@@ -9273,7 +9270,7 @@ F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
TI KEYSTONE MULTICORE NAVIGATOR DRIVERS
-M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+M: Santosh Shilimkar <ssantosh@kernel.org>
L: linux-kernel@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -354,13 +354,15 @@ dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb
+ qcom-msm8960-cdp.dtb \
+ qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3188-radxarock.dtb \
@@ -675,7 +675,7 @@
sd4_bus8: sd4-bus-width8 {
samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
samsung,pin-function = <4>;
- samsung,pin-pud = <4>;
+ samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
@@ -368,3 +368,7 @@
};
};
};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
@@ -838,6 +838,14 @@
status = "okay";
};
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
+
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
@@ -815,7 +815,7 @@
#size-cells = <1>;
ranges;
- dwc3 {
+ usbdrd_dwc3_0: dwc3 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <0 72 0>;
@@ -841,7 +841,7 @@
#size-cells = <1>;
ranges;
- dwc3 {
+ usbdrd_dwc3_1: dwc3 {
compatible = "snps,dwc3";
reg = <0x12400000 0x10000>;
interrupts = <0 73 0>;
@@ -826,6 +826,14 @@
status = "okay";
};
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
+
&usbdrd_phy0 {
vbus-supply = <&usb300_vbus_reg>;
};
@@ -659,6 +659,9 @@
ethernet@gpmc {
compatible = "smsc,lan91c94";
+
+ status = "disabled";
+
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
new file mode 100644
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+ model = "CompuLab CM-QS600";
+ compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+ soc {
+ pinctrl@800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c@12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom@50 {
+ compatible = "24c02";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+ };
+ };
+
+ gsbi@16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ status = "ok";
+ };
+ };
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+ };
+ /* WLAN */
+ sdcc4: sdcc@121c0000 {
+ status = "okay";
+ };
+ };
+ };
+};
@@ -81,5 +81,13 @@
};
};
};
+
+ sata-phy@1b400000 {
+ status = "ok";
+ };
+
+ sata@29000000 {
+ status = "ok";
+ };
};
};
@@ -234,6 +234,39 @@
};
};
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sata@29000000 {
+ compatible = "qcom,ipq806x-ahci", "generic-ahci";
+ reg = <0x29000000 0x180>;
+
+ interrupts = <0 209 0x0>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_face", "iface", "core",
+ "rxoob", "pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
new file mode 100644
@@ -0,0 +1,17 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+ model = "Sony Xperia Z1";
+ compatible = "sony,xperia-honami", "qcom,msm8974";
+
+ memory@0 {
+ reg = <0 0x40000000>, <0x40000000 0x40000000>;
+ device_type = "memory";
+ };
+};
+
+&soc {
+ serial@f991e000 {
+ status = "ok";
+ };
+};
@@ -1,6 +1,7 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
@@ -54,12 +55,14 @@ CONFIG_SMSC911X=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_GADGET=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ATMEL_MXT=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
@@ -68,15 +71,18 @@ CONFIG_HW_RANDOM=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS_I2C_INFINEON=y
CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
CONFIG_I2C_EXYNOS5=y
+CONFIG_I2C_GPIO=y
CONFIG_I2C_CROS_EC_TUNNEL=y
CONFIG_SPI=y
CONFIG_SPI_S3C64XX=y
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_TPS65090=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
@@ -88,6 +94,7 @@ CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_MAX77686=y
+CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_TPS65090=y
@@ -96,6 +103,8 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MAX8997=y
CONFIG_REGULATOR_MAX77686=y
+CONFIG_REGULATOR_MAX77802=y
+CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
@@ -115,6 +124,7 @@ CONFIG_SND_SOC=y
CONFIG_SND_SOC_SAMSUNG=y
CONFIG_SND_SOC_SNOW=y
CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_EXYNOS=y
@@ -51,6 +51,7 @@ CONFIG_SOC_AM43XX=y
CONFIG_SOC_DRA7XX=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_411920=y
+CONFIG_ARM_ERRATA_430973=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_CMA=y
@@ -75,6 +75,7 @@ CONFIG_POWER_RESET_SUN6I=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AXP20X=y
+CONFIG_REGULATOR=y
CONFIG_REGULATOR_GPIO=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
@@ -161,7 +161,9 @@ static void exynos_restart(enum reboot_mode mode, const char *cmd)
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
+#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
.dev.platform_data = exynos_enter_aftr,
+#endif
.id = -1,
};
@@ -279,7 +279,7 @@ ENTRY(\name\()_processor_functions)
.if \suspend
.word cpu_\name\()_suspend_size
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ARM_CPU_SUSPEND
.word cpu_\name\()_do_suspend
.word cpu_\name\()_do_resume
#else
@@ -268,8 +268,9 @@ config S5P_DEV_MFC
comment "Power management"
config SAMSUNG_PM_DEBUG
- bool "S3C2410 PM Suspend debug"
- depends on PM && DEBUG_KERNEL && DEBUG_S3C_UART
+ bool "Samsung PM Suspend debug"
+ depends on PM && DEBUG_KERNEL
+ depends on DEBUG_EXYNOS_UART || DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
@@ -14,6 +14,7 @@
*/
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/map.h>
Hi Linus, The following changes since commit 0429fbc0bdc297d64188483ba029a23773ae07b0: Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu (2014-10-15 07:48:18 +0200) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/arm-soc-fixes-rc1 for you to fetch changes up to 57764512cef5d67623b6ac0a966761f5bbc43aa0: Merge tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into fixes (2014-10-19 13:39:08 -0700) ---------------------------------------------------------------- ARM: SoC fixes for -rc1 A batch of fixes that have come in during the merge window. Some of them are defconfig updates for things that have now landed, some errata additions and a few general scattered fixes. There's also a qcom DT update that adds support for SATA on AP148, and basic support for Sony Xperia Z1 and CM-QS600 platforms that seemed isolated enough that we could merge it even if it's late. ---------------------------------------------------------------- Bartlomiej Zolnierkiewicz (2): ARM: EXYNOS: Fix build with PM_SLEEP=n and ARM_EXYNOS_CPUIDLE=n ARM: mm: Fix ifdef around cpu_*_do_[suspend, resume] ops Javier Martinez Canillas (3): ARM: exynos_defconfig: Enable Atmel maXTouch support ARM: exynos_defconfig: Enable Control Groups support ARM: exynos_defconfig: Enable SBS battery support Krzysztof Kozlowski (1): ARM: exynos_defconfig: Enable Maxim 77693 and I2C GPIO drivers Kumar Gala (1): ARM: dts: qcom: Add SATA support on IPQ8064/AP148 Mike Rapoport (1): ARM: dts: qcom: add CM-QS600 board Olof Johansson (6): ARM: sunxi_defconfig: enable CONFIG_REGULATOR Merge tag 'fixes-for-v3.18-merge-window' of git://git.kernel.org/.../tmlind/linux-omap into fixes Merge tag 'samsung-fixes' of git://git.kernel.org/.../kgene/linux-samsung into fixes Merge tag 'samsung-defconfig' of git://git.kernel.org/.../kgene/linux-samsung into fixes Merge tag 'samsung-fixes-2' of git://git.kernel.org/.../kgene/linux-samsung into fixes Merge tag 'qcom-dt-for-3.18-3' of git://git.kernel.org/.../galak/linux-qcom into fixes Santosh Shilimkar (1): MAINTAINERS: Update Santosh Shilimkar's email id Scott Branden (1): MAINTAINERS: corrected bcm2835 search Sjoerd Simons (3): ARM: exynos_defconfig: enable USB gadget support ARM: dts: Explicitly set dr_mode on exynos Peach boards ARM: dts: Explicitly set dr_mode on exynos5420-arndale-octa Tim Bird (1): ARM: dts: qcom: Add initial DTS file for Sony Xperia Z1 phone Tomasz Figa (2): ARM: dts: Fix pull setting in sd4_width8 pin group for exynos4x12 ARM: SAMSUNG: Restore Samsung PM Debug functionality Tony Lindgren (2): ARM: omap2plus_defconfig: Enable ARM erratum 430973 for omap3 ARM: dts: Disable smc91x on n900 until bootloader dependency is removed Vivek Gautam (1): ARM: exynos_defconfig: Enable MAX77802 .../devicetree/bindings/vendor-prefixes.txt | 1 + MAINTAINERS | 23 ++++----- arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 2 +- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 4 ++ arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 +++ arch/arm/boot/dts/exynos5420.dtsi | 4 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 +++ arch/arm/boot/dts/omap3-n900.dts | 3 ++ arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 59 ++++++++++++++++++++++ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 8 +++ arch/arm/boot/dts/qcom-ipq8064.dtsi | 33 ++++++++++++ .../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 17 +++++++ arch/arm/configs/exynos_defconfig | 10 ++++ arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/configs/sunxi_defconfig | 1 + arch/arm/mach-exynos/exynos.c | 2 + arch/arm/mm/proc-macros.S | 2 +- arch/arm/plat-samsung/Kconfig | 5 +- arch/arm/plat-samsung/pm-debug.c | 1 + 20 files changed, 176 insertions(+), 20 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts create mode 100644 arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts