@@ -159,15 +159,6 @@ config MACH_APE6EVM_REFERENCE
This is intended to aid developers
-config MACH_MACKEREL
- bool "mackerel board"
- depends on ARCH_SH7372
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SMSC_PHY if SMSC911X
- select SND_SOC_AK4642 if SND_SIMPLE_CARD
- select USE_OF
-
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
@@ -60,7 +60,6 @@ obj-$(CONFIG_MACH_MARZEN) += board-marze
else
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_APE6EVM_REFERENCE) += board-ape6evm-reference.o
-obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
@@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
-loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
__ZRELADDR := $(sort $(loadaddr-y))
@@ -1,1522 +0,0 @@
-/*
- * mackerel board support
- *
- * Copyright (C) 2010 Renesas Solutions Corp.
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on ap4evb
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2008 Yoshihiro Shimoda
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/sh_flctl.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_data/gpio_backlight.h>
-#include <linux/pm_clock.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/sh_clk.h>
-#include <linux/tca6416_keypad.h>
-#include <linux/usb/renesas_usbhs.h>
-#include <linux/dma-mapping.h>
-
-#include <video/sh_mobile_hdmi.h>
-#include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <media/soc_camera_platform.h>
-#include <sound/sh_fsi.h>
-#include <sound/simple_card.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include "common.h"
-#include "intc.h"
-#include "irqs.h"
-#include "pm-rmobile.h"
-#include "sh-gpio.h"
-#include "sh7372.h"
-
-/*
- * Address Interface BusWidth note
- * ------------------------------------------------------------------
- * 0x0000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = ON
- * 0x0800_0000 user area -
- * 0x1000_0000 NOR Flash ROM (MCP) 16bit SW7 : bit1 = OFF
- * 0x1400_0000 Ether (LAN9220) 16bit
- * 0x1600_0000 user area - cannot use with NAND
- * 0x1800_0000 user area -
- * 0x1A00_0000 -
- * 0x4000_0000 LPDDR2-SDRAM (POP) 32bit
- */
-
-/*
- * CPU mode
- *
- * SW4 | Boot Area| Master | Remarks
- * 1 | 2 | 3 | 4 | 5 | 6 | 8 | | Processor|
- * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
- * ON | ON | OFF | ON | ON | OFF | OFF | External | System | External ROM
- * ON | ON | ON | ON | ON | OFF | OFF | External | System | ROM Debug
- * ON | ON | X | ON | OFF | OFF | OFF | Built-in | System | ROM Debug
- * X | OFF | X | X | X | X | OFF | Built-in | System | MaskROM
- * OFF | X | X | X | X | X | OFF | Built-in | System | MaskROM
- * X | X | X | OFF | X | X | OFF | Built-in | System | MaskROM
- * OFF | ON | OFF | X | X | OFF | ON | External | System | Standalone
- * ON | OFF | OFF | X | X | OFF | ON | External | Realtime | Standalone
-*/
-
-/*
- * NOR Flash ROM
- *
- * SW1 | SW2 | SW7 | NOR Flash ROM
- * bit1 | bit1 bit2 | bit1 | Memory allocation
- * ------+------------+------+------------------
- * OFF | ON OFF | ON | Area 0
- * OFF | ON OFF | OFF | Area 4
- */
-
-/*
- * SMSC 9220
- *
- * SW1 SMSC 9220
- * -----------------------
- * ON access disable
- * OFF access enable
- */
-
-/*
- * NAND Flash ROM
- *
- * SW1 | SW2 | SW7 | NAND Flash ROM
- * bit1 | bit1 bit2 | bit2 | Memory allocation
- * ------+------------+------+------------------
- * OFF | ON OFF | ON | FCE 0
- * OFF | ON OFF | OFF | FCE 1
- */
-
-/*
- * External interrupt pin settings
- *
- * IRQX | pin setting | device | level
- * ------+--------------------+--------------------+-------
- * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low
- * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High
- * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low
- * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low
- * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low
- * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High
- * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975) | High
- */
-
-/*
- * USB
- *
- * USB0 : CN22 : Function
- * USB1 : CN31 : Function/Host *1
- *
- * J30 (for CN31) *1
- * ----------+---------------+-------------
- * 1-2 short | VBUS 5V | Host
- * open | external VBUS | Function
- *
- * CAUTION
- *
- * renesas_usbhs driver can use external interrupt mode
- * (which come from USB-PHY) or autonomy mode (it use own interrupt)
- * for detecting connection/disconnection when Function.
- * USB will be power OFF while it has been disconnecting
- * if external interrupt mode, and it is always power ON if autonomy mode,
- *
- * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
- * because Touchscreen is using IRQ7-PORT40.
- * It is impossible to use IRQ7 demux on this board.
- */
-
-/*
- * SDHI0 (CN12)
- *
- * SW56 : OFF
- *
- */
-
-/* MMC /SDHI1 (CN7)
- *
- * I/O voltage : 1.8v
- *
- * Power voltage : 1.8v or 3.3v
- * J22 : select power voltage *1
- * 1-2 pin : 1.8v
- * 2-3 pin : 3.3v
- *
- * *1
- * Please change J22 depends the card to be used.
- * MMC's OCR field set to support either voltage for the card inserted.
- *
- * SW1 | SW33
- * | bit1 | bit2 | bit3 | bit4
- * -------------+------+------+------+-------
- * MMC0 OFF | OFF | X | ON | X (Use MMCIF)
- * SDHI1 OFF | ON | X | OFF | X (Use MFD_SH_MOBILE_SDHI)
- *
- */
-
-/*
- * SDHI2 (CN23)
- *
- * microSD card sloct
- *
- */
-
-/*
- * FSI - AK4642
- *
- * it needs amixer settings for playing
- *
- * amixer set "Headphone Enable" on
- */
-
-/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
- /*
- * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
- * Since we cannot support both voltages, we support the default 1.8V
- */
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
- REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] =
-{
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
-};
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-/* MTD */
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel_ro",
- .offset = MTDPART_OFS_APPEND,
- .size = 8 * 1024 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 8 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 2,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = 0x20000000, /* CS0 shadow instead of regular CS0 */
- .end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-/* SMSC */
-static struct resource smc911x_resources[] = {
- {
- .start = 0x14000000,
- .end = 0x16000000 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = evt2irq(0x02c0) /* IRQ6A */,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct smsc911x_platform_config smsc911x_info = {
- .flags = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device smc911x_device = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
- .dev = {
- .platform_data = &smsc911x_info,
- },
-};
-
-/* MERAM */
-static struct sh_mobile_meram_info mackerel_meram_info = {
- .addr_mode = SH_MOBILE_MERAM_MODE1,
-};
-
-static struct resource meram_resources[] = {
- [0] = {
- .name = "regs",
- .start = 0xe8000000,
- .end = 0xe807ffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "meram",
- .start = 0xe8080000,
- .end = 0xe81fffff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device meram_device = {
- .name = "sh_mobile_meram",
- .id = 0,
- .num_resources = ARRAY_SIZE(meram_resources),
- .resource = meram_resources,
- .dev = {
- .platform_data = &mackerel_meram_info,
- },
-};
-
-/* LCDC and backlight */
-static struct fb_videomode mackerel_lcdc_modes[] = {
- {
- .name = "WVGA Panel",
- .xres = 800,
- .yres = 480,
- .left_margin = 220,
- .right_margin = 110,
- .hsync_len = 70,
- .upper_margin = 20,
- .lower_margin = 5,
- .vsync_len = 5,
- .sync = 0,
- },
-};
-
-static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
- .icb[0] = {
- .meram_size = 0x40,
- },
- .icb[1] = {
- .meram_size = 0x40,
- },
-};
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .meram_dev = &mackerel_meram_info,
- .clock_source = LCDC_CLK_BUS,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .lcd_modes = mackerel_lcdc_modes,
- .num_modes = ARRAY_SIZE(mackerel_lcdc_modes),
- .interface_type = RGB24,
- .clock_divider = 3,
- .flags = 0,
- .panel_cfg = {
- .width = 152,
- .height = 91,
- },
- .meram_cfg = &lcd_meram_cfg,
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000,
- .end = 0xfe943fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x580),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct gpio_backlight_platform_data gpio_backlight_data = {
- .fbdev = &lcdc_device.dev,
- .gpio = 31,
- .def_value = 1,
- .name = "backlight",
-};
-
-static struct platform_device gpio_backlight_device = {
- .name = "gpio-backlight",
- .dev = {
- .platform_data = &gpio_backlight_data,
- },
-};
-
-/* HDMI */
-static struct sh_mobile_hdmi_info hdmi_info = {
- .flags = HDMI_SND_SRC_SPDIF,
-};
-
-static struct resource hdmi_resources[] = {
- [0] = {
- .name = "HDMI",
- .start = 0xe6be0000,
- .end = 0xe6be00ff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* There's also an HDMI interrupt on INTCS @ 0x18e0 */
- .start = evt2irq(0x17e0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device hdmi_device = {
- .name = "sh-mobile-hdmi",
- .num_resources = ARRAY_SIZE(hdmi_resources),
- .resource = hdmi_resources,
- .id = -1,
- .dev = {
- .platform_data = &hdmi_info,
- },
-};
-
-static const struct sh_mobile_meram_cfg hdmi_meram_cfg = {
- .icb[0] = {
- .meram_size = 0x100,
- },
- .icb[1] = {
- .meram_size = 0x100,
- },
-};
-
-static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
- .meram_dev = &mackerel_meram_info,
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .fourcc = V4L2_PIX_FMT_RGB565,
- .interface_type = RGB24,
- .clock_divider = 1,
- .flags = LCDC_FLAGS_DWPOL,
- .meram_cfg = &hdmi_meram_cfg,
- .tx_dev = &hdmi_device,
- }
-};
-
-static struct resource hdmi_lcdc_resources[] = {
- [0] = {
- .name = "LCDC1",
- .start = 0xfe944000,
- .end = 0xfe947fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x1780),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device hdmi_lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
- .resource = hdmi_lcdc_resources,
- .id = 1,
- .dev = {
- .platform_data = &hdmi_lcdc_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct asoc_simple_card_info fsi2_hdmi_info = {
- .name = "HDMI",
- .card = "FSI2B-HDMI",
- .codec = "sh-mobile-hdmi",
- .platform = "sh_fsi2",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS,
- .cpu_dai = {
- .name = "fsib-dai",
- },
- .codec_dai = {
- .name = "sh_mobile_hdmi-hifi",
- },
-};
-
-static struct platform_device fsi_hdmi_device = {
- .name = "asoc-simple-card",
- .id = 1,
- .dev = {
- .platform_data = &fsi2_hdmi_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
- },
-};
-
-static void __init hdmi_init_pm_clock(void)
-{
- struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
- int ret;
- long rate;
-
- if (IS_ERR(hdmi_ick)) {
- ret = PTR_ERR(hdmi_ick);
- pr_err("Cannot get HDMI ICK: %d\n", ret);
- goto out;
- }
-
- ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
- if (ret < 0) {
- pr_err("Cannot set PLLC2 parent: %d, %d users\n",
- ret, sh7372_pllc2_clk.usecount);
- goto out;
- }
-
- pr_debug("PLLC2 initial frequency %lu\n",
- clk_get_rate(&sh7372_pllc2_clk));
-
- rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
- if (rate <= 0) {
- pr_err("Cannot get suitable rate: %ld\n", rate);
- ret = -EINVAL;
- goto out;
- }
-
- ret = clk_set_rate(&sh7372_pllc2_clk, rate);
- if (ret < 0) {
- pr_err("Cannot set rate %ld: %d\n", rate, ret);
- goto out;
- }
-
- pr_debug("PLLC2 set frequency %lu\n", rate);
-
- ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
- if (ret < 0)
- pr_err("Cannot set HDMI parent: %d\n", ret);
-
-out:
- if (!IS_ERR(hdmi_ick))
- clk_put(hdmi_ick);
-}
-
-/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
- *
- * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
- * but on this particular board IRQ7 is already used by
- * the touch screen. This leaves us with software polling.
- */
-#define USBHS0_POLL_INTERVAL (HZ * 5)
-
-struct usbhs_private {
- void __iomem *usbphyaddr;
- void __iomem *usbcrcaddr;
- struct renesas_usbhs_platform_info info;
- struct delayed_work work;
- struct platform_device *pdev;
-};
-
-#define usbhs_get_priv(pdev) \
- container_of(renesas_usbhs_get_info(pdev), \
- struct usbhs_private, info)
-
-#define usbhs_is_connected(priv) \
- (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs_get_vbus(struct platform_device *pdev)
-{
- return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
-static int usbhs_phy_reset(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* init phy */
- __raw_writew(0x8a0a, priv->usbcrcaddr);
-
- return 0;
-}
-
-static int usbhs0_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-static void usbhs0_work_function(struct work_struct *work)
-{
- struct usbhs_private *priv = container_of(work, struct usbhs_private,
- work.work);
-
- renesas_usbhs_call_notify_hotplug(priv->pdev);
- schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
-}
-
-static int usbhs0_hardware_init(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- priv->pdev = pdev;
- INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
- schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
- return 0;
-}
-
-static int usbhs0_hardware_exit(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- cancel_delayed_work_sync(&priv->work);
-
- return 0;
-}
-
-static struct usbhs_private usbhs0_private = {
- .usbcrcaddr = IOMEM(0xe605810c), /* USBCR2 */
- .info = {
- .platform_callback = {
- .hardware_init = usbhs0_hardware_init,
- .hardware_exit = usbhs0_hardware_exit,
- .phy_reset = usbhs_phy_reset,
- .get_id = usbhs0_get_id,
- .get_vbus = usbhs_get_vbus,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .d0_tx_id = SHDMA_SLAVE_USB0_TX,
- .d1_rx_id = SHDMA_SLAVE_USB0_RX,
- },
- },
-};
-
-static struct resource usbhs0_resources[] = {
- [0] = {
- .name = "USBHS0",
- .start = 0xe6890000,
- .end = 0xe68900e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ca0) /* USB0_USB0I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs0_device = {
- .name = "renesas_usbhs",
- .id = 0,
- .dev = {
- .platform_data = &usbhs0_private.info,
- },
- .num_resources = ARRAY_SIZE(usbhs0_resources),
- .resource = usbhs0_resources,
-};
-
-/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
- *
- * Use J30 to select between Host and Function. This setting
- * can however not be detected by software. Hotplug of USBHS1
- * is provided via IRQ8.
- *
- * Current USB1 works as "USB Host".
- * - set J30 "short"
- *
- * If you want to use it as "USB gadget",
- * - J30 "open"
- * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
- * - add .get_vbus = usbhs_get_vbus in usbhs1_private
- * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
- */
-#define IRQ8 evt2irq(0x0300)
-#define USB_PHY_MODE (1 << 4)
-#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
-#define USB_PHY_ON (1 << 1)
-#define USB_PHY_OFF (1 << 0)
-#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF)
-
-static irqreturn_t usbhs1_interrupt(int irq, void *data)
-{
- struct platform_device *pdev = data;
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- dev_dbg(&pdev->dev, "%s\n", __func__);
-
- renesas_usbhs_call_notify_hotplug(pdev);
-
- /* clear status */
- __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
- priv->usbphyaddr);
-
- return IRQ_HANDLED;
-}
-
-static int usbhs1_hardware_init(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
- int ret;
-
- /* clear interrupt status */
- __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
- ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
- dev_name(&pdev->dev), pdev);
- if (ret) {
- dev_err(&pdev->dev, "request_irq err\n");
- return ret;
- }
-
- /* enable USB phy interrupt */
- __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);
-
- return 0;
-}
-
-static int usbhs1_hardware_exit(struct platform_device *pdev)
-{
- struct usbhs_private *priv = usbhs_get_priv(pdev);
-
- /* clear interrupt status */
- __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
-
- free_irq(IRQ8, pdev);
-
- return 0;
-}
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
- return USBHS_HOST;
-}
-
-static u32 usbhs1_pipe_cfg[] = {
- USB_ENDPOINT_XFER_CONTROL,
- USB_ENDPOINT_XFER_ISOC,
- USB_ENDPOINT_XFER_ISOC,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_INT,
- USB_ENDPOINT_XFER_INT,
- USB_ENDPOINT_XFER_INT,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
- USB_ENDPOINT_XFER_BULK,
-};
-
-static struct usbhs_private usbhs1_private = {
- .usbphyaddr = IOMEM(0xe60581e2), /* USBPHY1INTAP */
- .usbcrcaddr = IOMEM(0xe6058130), /* USBCR4 */
- .info = {
- .platform_callback = {
- .hardware_init = usbhs1_hardware_init,
- .hardware_exit = usbhs1_hardware_exit,
- .get_id = usbhs1_get_id,
- .phy_reset = usbhs_phy_reset,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .has_otg = 1,
- .pipe_type = usbhs1_pipe_cfg,
- .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg),
- .d0_tx_id = SHDMA_SLAVE_USB1_TX,
- .d1_rx_id = SHDMA_SLAVE_USB1_RX,
- },
- },
-};
-
-static struct resource usbhs1_resources[] = {
- [0] = {
- .name = "USBHS1",
- .start = 0xe68b0000,
- .end = 0xe68b00e6 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x1ce0) /* USB1_USB1I0 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device usbhs1_device = {
- .name = "renesas_usbhs",
- .id = 1,
- .dev = {
- .platform_data = &usbhs1_private.info,
- .dma_mask = &usbhs1_device.dev.coherent_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(usbhs1_resources),
- .resource = usbhs1_resources,
-};
-
-/* LED */
-static struct gpio_led mackerel_leds[] = {
- {
- .name = "led0",
- .gpio = 0,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "led1",
- .gpio = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "led2",
- .gpio = 2,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "led3",
- .gpio = 159,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_led_platform_data mackerel_leds_pdata = {
- .leds = mackerel_leds,
- .num_leds = ARRAY_SIZE(mackerel_leds),
-};
-
-static struct platform_device leds_device = {
- .name = "leds-gpio",
- .id = 0,
- .dev = {
- .platform_data = &mackerel_leds_pdata,
- },
-};
-
-/* FSI */
-#define IRQ_FSI evt2irq(0x1840)
-static struct sh_fsi_platform_info fsi_info = {
- .port_a = {
- .tx_id = SHDMA_SLAVE_FSIA_TX,
- .rx_id = SHDMA_SLAVE_FSIA_RX,
- },
- .port_b = {
- .flags = SH_FSI_CLK_CPG |
- SH_FSI_FMT_SPDIF,
- }
-};
-
-static struct resource fsi_resources[] = {
- [0] = {
- /* we need 0xFE1F0000 to access DMA
- * instead of 0xFE3C0000 */
- .name = "FSI",
- .start = 0xFE1F0000,
- .end = 0xFE1F0400 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_FSI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device fsi_device = {
- .name = "sh_fsi2",
- .id = -1,
- .num_resources = ARRAY_SIZE(fsi_resources),
- .resource = fsi_resources,
- .dev = {
- .platform_data = &fsi_info,
- },
-};
-
-static struct asoc_simple_card_info fsi2_ak4643_info = {
- .name = "AK4643",
- .card = "FSI2A-AK4643",
- .codec = "ak4642-codec.0-0013",
- .platform = "sh_fsi2",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
- .cpu_dai = {
- .name = "fsia-dai",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
-};
-
-static struct platform_device fsi_ak4643_device = {
- .name = "asoc-simple-card",
- .dev = {
- .platform_data = &fsi2_ak4643_info,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .dma_mask = &fsi_ak4643_device.dev.coherent_dma_mask,
- },
-};
-
-/* FLCTL */
-static struct mtd_partition nand_partition_info[] = {
- {
- .name = "system",
- .offset = 0,
- .size = 128 * 1024 * 1024,
- },
- {
- .name = "userdata",
- .offset = MTDPART_OFS_APPEND,
- .size = 256 * 1024 * 1024,
- },
- {
- .name = "cache",
- .offset = MTDPART_OFS_APPEND,
- .size = 128 * 1024 * 1024,
- },
-};
-
-static struct resource nand_flash_resources[] = {
- [0] = {
- .start = 0xe6a30000,
- .end = 0xe6a3009b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = evt2irq(0x0d80), /* flstei: status error irq */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_flctl_platform_data nand_flash_data = {
- .parts = nand_partition_info,
- .nr_parts = ARRAY_SIZE(nand_partition_info),
- .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET
- | SHBUSSEL | SEL_16BIT | SNAND_E,
- .use_holden = 1,
-};
-
-static struct platform_device nand_flash_device = {
- .name = "sh_flctl",
- .resource = nand_flash_resources,
- .num_resources = ARRAY_SIZE(nand_flash_resources),
- .dev = {
- .platform_data = &nand_flash_data,
- },
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
- .tmio_flags = TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
- .cd_gpio = 172,
-};
-
-static struct resource sdhi0_resources[] = {
- {
- .name = "SDHI0",
- .start = 0xe6850000,
- .end = 0xe68500ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi0_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi0_resources),
- .resource = sdhi0_resources,
- .id = 0,
- .dev = {
- .platform_data = &sdhi0_info,
- },
-};
-
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-/* SDHI1 */
-
-/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */
-static struct sh_mobile_sdhi_info sdhi1_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_NEEDS_POLL,
- .cd_gpio = 41,
-};
-
-static struct resource sdhi1_resources[] = {
- {
- .name = "SDHI1",
- .start = 0xe6860000,
- .end = 0xe68600ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
- .flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi1_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi1_resources),
- .resource = sdhi1_resources,
- .id = 1,
- .dev = {
- .platform_data = &sdhi1_info,
- },
-};
-#endif
-
-/* SDHI2 */
-
-/*
- * The card detect pin of the top SD/MMC slot (CN23) is active low and is
- * connected to GPIO SCIFB_SCK of SH7372 (GPIO 162).
- */
-static struct sh_mobile_sdhi_info sdhi2_info = {
- .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
- .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_NEEDS_POLL,
- .cd_gpio = 162,
-};
-
-static struct resource sdhi2_resources[] = {
- {
- .name = "SDHI2",
- .start = 0xe6870000,
- .end = 0xe68700ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
- .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
- .flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
- .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device sdhi2_device = {
- .name = "sh_mobile_sdhi",
- .num_resources = ARRAY_SIZE(sdhi2_resources),
- .resource = sdhi2_resources,
- .id = 2,
- .dev = {
- .platform_data = &sdhi2_info,
- },
-};
-
-/* SH_MMCIF */
-#if IS_ENABLED(CONFIG_MMC_SH_MMCIF)
-static struct resource sh_mmcif_resources[] = {
- [0] = {
- .name = "MMCIF",
- .start = 0xE6BD0000,
- .end = 0xE6BD00FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- /* MMC ERR */
- .start = evt2irq(0x1ac0),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* MMC NOR */
- .start = evt2irq(0x1ae0),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
- .sup_pclk = 0,
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
- .use_cd_gpio = true,
- /* card detect pin for SD/MMC slot (CN7) */
- .cd_gpio = 41,
- .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
- .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device sh_mmcif_device = {
- .name = "sh_mmcif",
- .id = 0,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- .platform_data = &sh_mmcif_plat,
- },
- .num_resources = ARRAY_SIZE(sh_mmcif_resources),
- .resource = sh_mmcif_resources,
-};
-#endif
-
-static int mackerel_camera_add(struct soc_camera_device *icd);
-static void mackerel_camera_del(struct soc_camera_device *icd);
-
-static int camera_set_capture(struct soc_camera_platform_info *info,
- int enable)
-{
- return 0; /* camera sensor always enabled */
-}
-
-static struct soc_camera_platform_info camera_info = {
- .format_name = "UYVY",
- .format_depth = 16,
- .format = {
- .code = MEDIA_BUS_FMT_UYVY8_2X8,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- .field = V4L2_FIELD_NONE,
- .width = 640,
- .height = 480,
- },
- .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
- V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
- V4L2_MBUS_DATA_ACTIVE_HIGH,
- .mbus_type = V4L2_MBUS_PARALLEL,
- .set_capture = camera_set_capture,
-};
-
-static struct soc_camera_link camera_link = {
- .bus_id = 0,
- .add_device = mackerel_camera_add,
- .del_device = mackerel_camera_del,
- .module_name = "soc_camera_platform",
- .priv = &camera_info,
-};
-
-static struct platform_device *camera_device;
-
-static void mackerel_camera_release(struct device *dev)
-{
- soc_camera_platform_release(&camera_device);
-}
-
-static int mackerel_camera_add(struct soc_camera_device *icd)
-{
- return soc_camera_platform_add(icd, &camera_device, &camera_link,
- mackerel_camera_release, 0);
-}
-
-static void mackerel_camera_del(struct soc_camera_device *icd)
-{
- soc_camera_platform_del(icd, camera_device, &camera_link);
-}
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
- .flags = SH_CEU_FLAG_USE_8BIT_BUS,
- .max_width = 8188,
- .max_height = 8188,
-};
-
-static struct resource ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = intcs_evt2irq(0x880),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device ceu_device = {
- .name = "sh_mobile_ceu",
- .id = 0, /* "ceu0" clock */
- .num_resources = ARRAY_SIZE(ceu_resources),
- .resource = ceu_resources,
- .dev = {
- .platform_data = &sh_mobile_ceu_info,
- .coherent_dma_mask = 0xffffffff,
- },
-};
-
-static struct platform_device mackerel_camera = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &camera_link,
- },
-};
-
-static struct platform_device *mackerel_devices[] __initdata = {
- &nor_flash_device,
- &smc911x_device,
- &lcdc_device,
- &gpio_backlight_device,
- &usbhs0_device,
- &usbhs1_device,
- &leds_device,
- &fsi_device,
- &fsi_ak4643_device,
- &fsi_hdmi_device,
- &nand_flash_device,
- &sdhi0_device,
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
- &sdhi1_device,
-#else
- &sh_mmcif_device,
-#endif
- &sdhi2_device,
- &ceu_device,
- &mackerel_camera,
- &hdmi_device,
- &hdmi_lcdc_device,
- &meram_device,
-};
-
-/* Keypad Initialization */
-#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
-{ \
- .type = ev_type, \
- .code = ev_code, \
- .active_low = act_low, \
-}
-
-#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
-
-static struct tca6416_button mackerel_gpio_keys[] = {
- KEYPAD_BUTTON_LOW(KEY_HOME),
- KEYPAD_BUTTON_LOW(KEY_MENU),
- KEYPAD_BUTTON_LOW(KEY_BACK),
- KEYPAD_BUTTON_LOW(KEY_POWER),
-};
-
-static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
- .buttons = mackerel_gpio_keys,
- .nbuttons = ARRAY_SIZE(mackerel_gpio_keys),
- .rep = 1,
- .use_polling = 0,
- .pinmask = 0x000F,
-};
-
-/* I2C */
-#define IRQ7 evt2irq(0x02e0)
-#define IRQ9 evt2irq(0x0320)
-
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("ak4643", 0x13),
- },
- /* Keypad */
- {
- I2C_BOARD_INFO("tca6408-keys", 0x20),
- .platform_data = &mackerel_tca6416_keys_info,
- .irq = IRQ9,
- },
- /* Touchscreen */
- {
- I2C_BOARD_INFO("st1232-ts", 0x55),
- .irq = IRQ7,
- },
-};
-
-#define IRQ21 evt2irq(0x32a0)
-
-static struct i2c_board_info i2c1_devices[] = {
- /* Accelerometer */
- {
- I2C_BOARD_INFO("adxl34x", 0x53),
- .irq = IRQ21,
- },
-};
-
-static unsigned long pin_pulldown_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0),
-};
-
-static const struct pinctrl_map mackerel_pinctrl_map[] = {
- /* ADXL34X */
- PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
- "intc_irq21", "intc"),
- /* CEU */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_data_0_7", "ceu"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_clk_0", "ceu"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_sync", "ceu"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
- "ceu_field", "ceu"),
- /* FLCTL */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
- "flctl_data", "flctl"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
- "flctl_ce0", "flctl"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
- "flctl_ctrl", "flctl"),
- /* FSIA (AK4643) */
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
- "fsia_sclk_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
- "fsia_data_in", "fsia"),
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
- "fsia_data_out", "fsia"),
- /* FSIB (HDMI) */
- PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
- "fsib_mclk_in", "fsib"),
- /* HDMI */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
- "hdmi", "hdmi"),
- /* LCDC */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
- "lcd_data24", "lcd"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
- "lcd_sync", "lcd"),
- /* SCIFA0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
- "scifa0_data", "scifa0"),
- /* SCIFA2 (GT-720F GPS module) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372",
- "scifa2_data", "scifa2"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "sdhi0_wp", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
- "intc_irq26_1", "intc"),
- /* SDHI1 */
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
- "sdhi1_data4", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
- "sdhi1_ctrl", "sdhi1"),
-#else
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
- "mmc0_ctrl_0", "mmc0"),
-#endif
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
- "sdhi2_ctrl", "sdhi2"),
- /* SMSC911X */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
- "bsc_cs5a", "bsc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
- "intc_irq6_0", "intc"),
- /* ST1232 */
- PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372",
- "intc_irq7_0", "intc"),
- /* TCA6416 */
- PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372",
- "intc_irq9_0", "intc"),
- /* USBHS0 */
- PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
- "usb0_vbus", "usb0"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
- "usb0_vbus", pin_pulldown_conf),
- /* USBHS1 */
- PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
- "usb1_vbus", "usb1"),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
- "usb1_vbus", pin_pulldown_conf),
- PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
- "usb1_otg_id_0", "usb1"),
-};
-
-#define GPIO_PORT9CR IOMEM(0xE6051009)
-#define GPIO_PORT10CR IOMEM(0xE605100A)
-#define SRCR4 IOMEM(0xe61580bc)
-#define USCCR1 IOMEM(0xE6058144)
-static void __init mackerel_init(void)
-{
- static struct pm_domain_device domain_devices[] __initdata = {
- { "A4LC", &lcdc_device, },
- { "A4LC", &hdmi_lcdc_device, },
- { "A4LC", &meram_device, },
- { "A4MP", &fsi_device, },
- { "A3SP", &usbhs0_device, },
- { "A3SP", &usbhs1_device, },
- { "A3SP", &nand_flash_device, },
- { "A3SP", &sdhi0_device, },
-#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
- { "A3SP", &sdhi1_device, },
-#else
- { "A3SP", &sh_mmcif_device, },
-#endif
- { "A3SP", &sdhi2_device, },
- { "A4R", &ceu_device, },
- };
- u32 srcr4;
- struct clk *clk;
-
- regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
- ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
- regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
- regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
- /* External clock source */
- clk_set_rate(&sh7372_dv_clki_clk, 27000000);
-
- pinctrl_register_mappings(mackerel_pinctrl_map,
- ARRAY_SIZE(mackerel_pinctrl_map));
- sh7372_pinmux_init();
-
- gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
- /* FSI2 port A (ak4643) */
- gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
-
- gpio_request(9, NULL);
- gpio_request(10, NULL);
- gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
- gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
-
- intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
-
- /* FSI2 port B (HDMI) */
- __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
-
- /* set SPU2 clock to 119.6 MHz */
- clk = clk_get(NULL, "spu_clk");
- if (!IS_ERR(clk)) {
- clk_set_rate(clk, clk_round_rate(clk, 119600000));
- clk_put(clk);
- }
-
- /* Keypad */
- irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
-
- /* Touchscreen */
- irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
-
- /* Accelerometer */
- irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
-
- /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
- srcr4 = __raw_readl(SRCR4);
- __raw_writel(srcr4 | (1 << 13), SRCR4);
- udelay(50);
- __raw_writel(srcr4 & ~(1 << 13), SRCR4);
-
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- i2c_register_board_info(1, i2c1_devices,
- ARRAY_SIZE(i2c1_devices));
-
- sh7372_add_standard_devices();
-
- platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
-
- rmobile_add_devices_to_domains(domain_devices,
- ARRAY_SIZE(domain_devices));
-
- hdmi_init_pm_clock();
- sh7372_pm_init();
- pm_clk_add(&fsi_device.dev, "spu2");
- pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
-}
-
-static const char *mackerel_boards_compat_dt[] __initdata = {
- "renesas,mackerel",
- NULL,
-};
-
-DT_MACHINE_START(MACKEREL_DT, "mackerel")
- .map_io = sh7372_map_io,
- .init_early = sh7372_add_early_devices,
- .init_irq = sh7372_init_irq,
- .handle_irq = shmobile_handle_irq_intc,
- .init_machine = mackerel_init,
- .init_late = sh7372_pm_init_late,
- .init_time = sh7372_earlytimer_init,
- .dt_compat = mackerel_boards_compat_dt,
-MACHINE_END