| Message ID | 20150824092813.GA15581@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 08/24, Varadarajan Narayanan wrote: > Add initial dts files and SoC support for IPQ40XX > So far we haven't added any Xs in the model names for our SoC support. Even for IPQ806X, we have it as IPQ8064 as the config name with IPQ806x in the help text because there's IPQ8062 out there. So I guess it should be IPQ4019 or something? > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > --- > diff --git a/Documentation/devicetree/bindings/qcom.txt b/Documentation/devicetree/bindings/qcom.txt > new file mode 100644 > index 0000000..7d56bd0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/qcom.txt > @@ -0,0 +1,16 @@ > +Qualcomm IPQ device tree bindings > +--------------------------------- > + > +System on Chip > + > +Device tree must specify which SoC it uses, with one of the > +following compatible strings > + > + "qcom,ipq40xx" > + > +Platform > + > +Device tree must specify which Platform it uses, with one of the > +following compatible strings > + > + "qcom,ipq40xx-r3pc" This file is not complete and I don't see any other silicon vendors doing this, so please drop the entire file. > diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > new file mode 100644 > index 0000000..7e4e629 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > @@ -0,0 +1,33 @@ > +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include "qcom-ipq40xx.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ40XX R3PC"; Same here, we should know what model number is on the board. > + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; > + > + memory { > + device_type = "memory"; > + reg = <0x80000000 0x20000000>; /* 512MB */ > + }; Doesn't the bootloader fill the memory node for us? Why do we need this? > + > + chosen { > + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; > + }; Please don't add bootargs. Use stdout-path for the console part and everything else should be done by the bootloader or is the defaults. > + > + soc { > + serial@78b0000 { > + status = "ok"; > + }; > + }; > +}; > diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > new file mode 100644 > index 0000000..f572f38 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > @@ -0,0 +1,81 @@ > +/* > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +/dts-v1/; > + > +#include "skeleton.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. IPQ40XX"; > + compatible = "qcom,ipq40xx"; These two should also be specific and drop the Xs. Same goes for the file name. > + interrupt-parent = <&intc>; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x0>; > + }; > + > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x1>; > + }; > + > + cpu@2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x2>; > + }; > + > + cpu@3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a7"; > + reg = <0x3>; > + }; > + }; > + > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + compatible = "simple-bus"; > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; > + interrupt-controller; > + #interrupt-cells = <3>; > + reg = <0x0b000000 0x1000>, > + <0x0b002000 0x1000>; > + }; > + > + timer { This node is not a child of the SoC node. It should be at the root level. > + compatible = "arm,armv7-timer"; > + interrupts = <1 2 0xf08>, > + <1 3 0xf08>, > + <1 4 0xf08>, > + <1 1 0xf08>; > + clock-frequency = <20833333>; Drop this clock-frequency part if you can. The hardware should properly report the frequency. > + }; > + > + serial@78b0000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0x78b0000 0x200>; > + interrupts = <0 108 0>; > + status = "disabled"; Don't you need some clocks here? > + }; > + }; > +}; > diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig > index 1cabd8b..89bf8ad 100644 > --- a/arch/arm/configs/ipq_defconfig > +++ b/arch/arm/configs/ipq_defconfig > @@ -21,6 +21,7 @@ CONFIG_ARCH_QCOM=y > CONFIG_ARCH_MSM8X60=y > CONFIG_ARCH_MSM8960=y > CONFIG_ARCH_MSM8974=y > +CONFIG_ARCH_IPQ40XX=y > CONFIG_ARCH_IPQ8064=y > CONFIG_SMP=y > CONFIG_PREEMPT=y This hunk should be in a separate patch. > diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig > index fab49a2..70812aa 100644 > --- a/arch/arm/mach-qcom/Kconfig > +++ b/arch/arm/mach-qcom/Kconfig > @@ -22,6 +22,10 @@ config ARCH_MSM8974 > bool "Enable support for MSM8974" > select HAVE_ARM_ARCH_TIMER > > +config ARCH_IPQ40XX > + bool "Enable support for IPQ40XX" > + select HAVE_ARM_ARCH_TIMER > + > config ARCH_IPQ8064 > bool "Enable support for IPQ806x" > select CLKSRC_QCOM > diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c > index 6d8bbf7..af9e247 100644 > --- a/arch/arm/mach-qcom/board.c > +++ b/arch/arm/mach-qcom/board.c > @@ -18,6 +18,7 @@ static const char * const qcom_dt_match[] __initconst = { > "qcom,apq8064", > "qcom,apq8074-dragonboard", > "qcom,apq8084", > + "qcom,ipq40xx", > "qcom,ipq8062", > "qcom,ipq8064", > "qcom,msm8660-surf", > And these two should also go as a separate patch.
On Mon, Aug 24, 2015 at 03:49:28PM -0700, Stephen Boyd wrote: > On 08/24, Varadarajan Narayanan wrote: > > Add initial dts files and SoC support for IPQ40XX > > > > So far we haven't added any Xs in the model names for our SoC > support. Even for IPQ806X, we have it as IPQ8064 as the config > name with IPQ806x in the help text because there's IPQ8062 out > there. So I guess it should be IPQ4019 or something? Will rename it as IPQ4019 > > Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> > > --- > > diff --git a/Documentation/devicetree/bindings/qcom.txt b/Documentation/devicetree/bindings/qcom.txt > > new file mode 100644 > > index 0000000..7d56bd0 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/qcom.txt > > @@ -0,0 +1,16 @@ > > +Qualcomm IPQ device tree bindings > > +--------------------------------- > > + > > +System on Chip > > + > > +Device tree must specify which SoC it uses, with one of the > > +following compatible strings > > + > > + "qcom,ipq40xx" > > + > > +Platform > > + > > +Device tree must specify which Platform it uses, with one of the > > +following compatible strings > > + > > + "qcom,ipq40xx-r3pc" > > This file is not complete and I don't see any other silicon > vendors doing this, so please drop the entire file. Ok. > > diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > > new file mode 100644 > > index 0000000..7e4e629 > > --- /dev/null > > +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts > > @@ -0,0 +1,33 @@ > > +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include "qcom-ipq40xx.dtsi" > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. IPQ40XX R3PC"; > > Same here, we should know what model number is on the board. Ok. > > + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; > > + > > + memory { > > + device_type = "memory"; > > + reg = <0x80000000 0x20000000>; /* 512MB */ > > + }; > > Doesn't the bootloader fill the memory node for us? Why do we > need this? > > > + > > + chosen { > > + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; > > + }; > > Please don't add bootargs. Use stdout-path for the console part > and everything else should be done by the bootloader or is the > defaults. Since this is for the emulation platform, we don't have the bootloader. > > + > > + soc { > > + serial@78b0000 { > > + status = "ok"; > > + }; > > + }; > > +}; > > diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > > new file mode 100644 > > index 0000000..f572f38 > > --- /dev/null > > +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi > > @@ -0,0 +1,81 @@ > > +/* > > + * Copyright (c) 2014, The Linux Foundation. All rights reserved. > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +/dts-v1/; > > + > > +#include "skeleton.dtsi" > > + > > +/ { > > + model = "Qualcomm Technologies, Inc. IPQ40XX"; > > + compatible = "qcom,ipq40xx"; > > These two should also be specific and drop the Xs. Same goes for > the file name. Ok. > > + interrupt-parent = <&intc>; > > + > > + cpus { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + cpu@0 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x0>; > > + }; > > + > > + cpu@1 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x1>; > > + }; > > + > > + cpu@2 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x2>; > > + }; > > + > > + cpu@3 { > > + device_type = "cpu"; > > + compatible = "arm,cortex-a7"; > > + reg = <0x3>; > > + }; > > + }; > > + > > + soc { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + compatible = "simple-bus"; > > + > > + intc: interrupt-controller@b000000 { > > + compatible = "qcom,msm-qgic2"; > > + interrupt-controller; > > + #interrupt-cells = <3>; > > + reg = <0x0b000000 0x1000>, > > + <0x0b002000 0x1000>; > > + }; > > + > > + timer { > > This node is not a child of the SoC node. It should be at the > root level. Ok. > > + compatible = "arm,armv7-timer"; > > + interrupts = <1 2 0xf08>, > > + <1 3 0xf08>, > > + <1 4 0xf08>, > > + <1 1 0xf08>; > > + clock-frequency = <20833333>; > > Drop this clock-frequency part if you can. The hardware should > properly report the frequency. Cannot drop this. This is the ref-clock frequency. For the chip it is 48MHz, for emulation is ~20MHz. Similar to https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/qcom-msm8974.dtsi#n89 > > + }; > > + > > + serial@78b0000 { > > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > > + reg = <0x78b0000 0x200>; > > + interrupts = <0 108 0>; > > + status = "disabled"; > > Don't you need some clocks here? Yes, will get updated in subsequent patches. > > + }; > > + }; > > +}; > > diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig > > index 1cabd8b..89bf8ad 100644 > > --- a/arch/arm/configs/ipq_defconfig > > +++ b/arch/arm/configs/ipq_defconfig > > @@ -21,6 +21,7 @@ CONFIG_ARCH_QCOM=y > > CONFIG_ARCH_MSM8X60=y > > CONFIG_ARCH_MSM8960=y > > CONFIG_ARCH_MSM8974=y > > +CONFIG_ARCH_IPQ40XX=y > > CONFIG_ARCH_IPQ8064=y > > CONFIG_SMP=y > > CONFIG_PREEMPT=y > > This hunk should be in a separate patch. Ok. > > diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig > > index fab49a2..70812aa 100644 > > --- a/arch/arm/mach-qcom/Kconfig > > +++ b/arch/arm/mach-qcom/Kconfig > > @@ -22,6 +22,10 @@ config ARCH_MSM8974 > > bool "Enable support for MSM8974" > > select HAVE_ARM_ARCH_TIMER > > > > +config ARCH_IPQ40XX > > + bool "Enable support for IPQ40XX" > > + select HAVE_ARM_ARCH_TIMER > > + > > config ARCH_IPQ8064 > > bool "Enable support for IPQ806x" > > select CLKSRC_QCOM > > diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c > > index 6d8bbf7..af9e247 100644 > > --- a/arch/arm/mach-qcom/board.c > > +++ b/arch/arm/mach-qcom/board.c > > @@ -18,6 +18,7 @@ static const char * const qcom_dt_match[] __initconst = { > > "qcom,apq8064", > > "qcom,apq8074-dragonboard", > > "qcom,apq8084", > > + "qcom,ipq40xx", > > "qcom,ipq8062", > > "qcom,ipq8064", > > "qcom,msm8660-surf", > > > > And these two should also go as a separate patch. Ok. Thanks Varada > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 08/25, Varadarajan Narayanan wrote: > On Mon, Aug 24, 2015 at 03:49:28PM -0700, Stephen Boyd wrote: > > On 08/24, Varadarajan Narayanan wrote: > > > > + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; > > > + > > > + memory { > > > + device_type = "memory"; > > > + reg = <0x80000000 0x20000000>; /* 512MB */ > > > + }; > > > > Doesn't the bootloader fill the memory node for us? Why do we > > need this? > > > > > + > > > + chosen { > > > + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; > > > + }; > > > > Please don't add bootargs. Use stdout-path for the console part > > and everything else should be done by the bootloader or is the > > defaults. > > Since this is for the emulation platform, we don't have the bootloader. Why are we upstreaming an emulation platform? I assume you have some sort of scripts or something to load the kernel image into the emulator, so those scripts could go and modify the dtb in place to populate the initrd and commandline. If you need pointers on that feel free to contact me directly. > > > > + compatible = "arm,armv7-timer"; > > > + interrupts = <1 2 0xf08>, > > > + <1 3 0xf08>, > > > + <1 4 0xf08>, > > > + <1 1 0xf08>; > > > + clock-frequency = <20833333>; > > > > Drop this clock-frequency part if you can. The hardware should > > properly report the frequency. > > Cannot drop this. This is the ref-clock frequency. For the > chip it is 48MHz, for emulation is ~20MHz. Similar to > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/qcom-msm8974.dtsi#n89 And the hardware is not emulated properly to report the actual frequency that the timer is running at? That's sad. At the least, this should be in the board specific dtsi file instead of the SoC specific file, because it's a board quirk.
On Tue, Aug 25, 2015 at 02:14:05PM -0700, Stephen Boyd wrote: > On 08/25, Varadarajan Narayanan wrote: > > On Mon, Aug 24, 2015 at 03:49:28PM -0700, Stephen Boyd wrote: > > > On 08/24, Varadarajan Narayanan wrote: > > > > > > + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; > > > > + > > > > + memory { > > > > + device_type = "memory"; > > > > + reg = <0x80000000 0x20000000>; /* 512MB */ > > > > + }; > > > > > > Doesn't the bootloader fill the memory node for us? Why do we > > > need this? > > > > > > > + > > > > + chosen { > > > > + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; > > > > + }; > > > > > > Please don't add bootargs. Use stdout-path for the console part > > > and everything else should be done by the bootloader or is the > > > defaults. > > > > Since this is for the emulation platform, we don't have the bootloader. > > Why are we upstreaming an emulation platform? Ok, will skip this. -Varada > I assume you have some sort of scripts or something to load the > kernel image into the emulator, so those scripts could go and > modify the dtb in place to populate the initrd and commandline. > If you need pointers on that feel free to contact me directly. > > > > > > > + compatible = "arm,armv7-timer"; > > > > + interrupts = <1 2 0xf08>, > > > > + <1 3 0xf08>, > > > > + <1 4 0xf08>, > > > > + <1 1 0xf08>; > > > > + clock-frequency = <20833333>; > > > > > > Drop this clock-frequency part if you can. The hardware should > > > properly report the frequency. > > > > Cannot drop this. This is the ref-clock frequency. For the > > chip it is 48MHz, for emulation is ~20MHz. Similar to > > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/qcom-msm8974.dtsi#n89 > > And the hardware is not emulated properly to report the actual > frequency that the timer is running at? That's sad. > > At the least, this should be in the board specific dtsi file > instead of the SoC specific file, because it's a board quirk. > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project
diff --git a/Documentation/devicetree/bindings/qcom.txt b/Documentation/devicetree/bindings/qcom.txt new file mode 100644 index 0000000..7d56bd0 --- /dev/null +++ b/Documentation/devicetree/bindings/qcom.txt @@ -0,0 +1,16 @@ +Qualcomm IPQ device tree bindings +--------------------------------- + +System on Chip + +Device tree must specify which SoC it uses, with one of the +following compatible strings + + "qcom,ipq40xx" + +Platform + +Device tree must specify which Platform it uses, with one of the +following compatible strings + + "qcom,ipq40xx-r3pc" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 246473a..d20d49c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -474,6 +474,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ + qcom-ipq40xx-r3pc.dtb \ qcom-ipq8064-ap148.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ diff --git a/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts new file mode 100644 index 0000000..7e4e629 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts @@ -0,0 +1,33 @@ +/* Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "qcom-ipq40xx.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40XX R3PC"; + compatible = "qcom,ipq40xx-r3pc", "qcom,ipq40xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + chosen { + bootargs = "root=/dev/ram rw init=/init console=ttyMSM0,115200n8 initrd=0x82000000,0x000E2246"; + }; + + soc { + serial@78b0000 { + status = "ok"; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-ipq40xx.dtsi b/arch/arm/boot/dts/qcom-ipq40xx.dtsi new file mode 100644 index 0000000..f572f38 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq40xx.dtsi @@ -0,0 +1,81 @@ +/* + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40XX"; + compatible = "qcom,ipq40xx"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <20833333>; + }; + + serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <0 108 0>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/configs/ipq_defconfig b/arch/arm/configs/ipq_defconfig index 1cabd8b..89bf8ad 100644 --- a/arch/arm/configs/ipq_defconfig +++ b/arch/arm/configs/ipq_defconfig @@ -21,6 +21,7 @@ CONFIG_ARCH_QCOM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_IPQ40XX=y CONFIG_ARCH_IPQ8064=y CONFIG_SMP=y CONFIG_PREEMPT=y diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index fab49a2..70812aa 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -22,6 +22,10 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER +config ARCH_IPQ40XX + bool "Enable support for IPQ40XX" + select HAVE_ARM_ARCH_TIMER + config ARCH_IPQ8064 bool "Enable support for IPQ806x" select CLKSRC_QCOM diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index 6d8bbf7..af9e247 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -18,6 +18,7 @@ static const char * const qcom_dt_match[] __initconst = { "qcom,apq8064", "qcom,apq8074-dragonboard", "qcom,apq8084", + "qcom,ipq40xx", "qcom,ipq8062", "qcom,ipq8064", "qcom,msm8660-surf",
Add initial dts files and SoC support for IPQ40XX Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> --- Changes in v2: - Added devicetree bindings documentation Changes in v3: - Split 'gcnt' into a separate patch - Added the new entries to Makefiles, Kconfig & board.c in sorted order - Used "qcom,ipq40xx" instead of "qcom,ipq40xx-r3pc" in board.c Documentation/devicetree/bindings/qcom.txt | 16 ++++++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts | 33 ++++++++++++ arch/arm/boot/dts/qcom-ipq40xx.dtsi | 81 ++++++++++++++++++++++++++++++ arch/arm/configs/ipq_defconfig | 1 + arch/arm/mach-qcom/Kconfig | 4 ++ arch/arm/mach-qcom/board.c | 1 + 7 files changed, 137 insertions(+) create mode 100644 Documentation/devicetree/bindings/qcom.txt create mode 100644 arch/arm/boot/dts/qcom-ipq40xx-r3pc.dts create mode 100644 arch/arm/boot/dts/qcom-ipq40xx.dtsi