diff mbox

mysterious crashes on OMAP5 uevm

Message ID 20150914121248.GD21098@n2100.arm.linux.org.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Russell King - ARM Linux Sept. 14, 2015, 12:12 p.m. UTC
On Fri, Sep 11, 2015 at 03:03:07PM +0100, Russell King - ARM Linux wrote:
> On Fri, Sep 11, 2015 at 03:27:13PM +0200, Grazvydas Ignotas wrote:
> > On Thu, Sep 10, 2015 at 10:30 AM, Russell King - ARM Linux
> > <linux@arm.linux.org.uk> wrote:
> > > On Thu, Sep 10, 2015 at 08:42:57AM +0200, Dr. H. Nikolaus Schaller wrote:
> > >> ...
> > >>
> > >> Now, disabling CONFIG_ARCH_MULTI_V6 also makes the bug go away and adding the
> > >> >> #if 0 //__LINUX_ARM_ARCH__ >= 7
> > >> makes it re-appear.
> > >>
> > >> A while ago I tried to debug running the x-server under strace and could find that it also has
> > >> something to do with SIGALRM.
> > >>
> > >> And that is very consistent with “enable/disable” by modifying arch/arm/kernel/signal.c
> > >
> > > It would be really nice if someone could diagnose what's going on here.
> > > What exception is causing the X server to be killed (someone said a
> > > segfault)?  What is the register state at the point that happens?  What
> > > does the code look like  Is it happening inside the SIGALRM handler, or
> > > when the SIGALRM handler has returned?
> > >
> > > I'd suggest attaching gdb to the X server, but remember to set gdb to
> > > ignore SIGPIPEs.
> > 
> > It's actually pretty random, see some debug sessions in [1].
> > The first one is the most useful one, but I haven't though of checking
> > what pixman_rasterize_edges() was doing when the signal arrived, and
> > most often the "less useful" segfaults occur. However from the
> > disassembly (see debug1_libpixman.gz) it can be seen that the signal
> > arrived right after IT.
> > 
> > [1] http://notaz.gp2x.de/tmp/thumb_segfault/
> 
> We're not going from ARM -> Thumb or Thumb -> ARM here, but Thumb code
> in libpixman is being interrupted calling a Thumb signal handler.
> 
> Working through the code:
> 
>    0x7f717ec8 <SmartScheduleTimer>:     ldr     r2, [pc, #20]   ; = 0x0004112e
>    0x7f717eca <SmartScheduleTimer+2>:   ldr     r1, [pc, #24]   ; = 0x00000c48
>    0x7f717ecc <SmartScheduleTimer+4>:   ldr     r3, [pc, #24]   ; = 0x00000e6c
>    0x7f717ece <SmartScheduleTimer+6>:   add     r2, pc
>    0x7f717ed0 <SmartScheduleTimer+8>:   ldr     r1, [r2, r1]
>    0x7f717ed2 <SmartScheduleTimer+10>:  ldr     r3, [r2, r3]
> => 0x7f717ed4 <SmartScheduleTimer+12>:  ldr     r2, [r1, #0]
> 
> The instruction at 0x7f717ed4 was trying to access 0xd1242963 which
> is in kernel space, and this is the faulting instruction.
> 
> At this point, r2 should contain 0x0004112e plus the PC value.  r2 in
> the register dump was 0x7f717fa0.  Let's calculate the value that PC
> should be here.  0x7f717fa0 - 0x0004112e = 0x7f6d6e72, which is
> clearly wrong.
> 
> So, I don't think the first instruction here was executed by the CPU.
> 
> gdb indicates that the parent context to the signal frame, pc was at
> 0xb6dd87f8, which works out at 0x297f8 into the libpixman-1 library:
> 
>    297f0:       449c            add     ip, r3
>    297f2:       f1bc 0fff       cmp.w   ip, #255        ; 0xff
>    297f6:       bfd4            ite     le
>    297f8:       fa5f fc8c       uxtble.w        ip, ip
>    297fc:       f04f 0cff       movgt.w ip, #255        ; 0xff
>    29800:       f88a c000       strb.w  ip, [sl]
> 
> and as you say, is just after an IT instruction, which would have
> set the IT execution state to appropriately skip either the first or
> the second instruction.
> 
> Unfortunately, the IT instruction's condition is being carried forward
> to the signal handler, causing either the first or second instruction
> there to be skipped.
> 
> Looking back at the history, the original commit introducing the
> clearing of the PSR_IT_MASK bits is just wrong:
> 
> -               if (thumb)
> +               if (thumb) {
>                         cpsr |= PSR_T_BIT;
> -               else
> +#if __LINUX_ARM_ARCH__ >= 7
> +                       /* clear the If-Then Thumb-2 execution state */
> +                       cpsr &= ~PSR_IT_MASK;
> +#endif
> +               } else
>                         cpsr &= ~PSR_T_BIT;
> 
> This shouldn't be a compile-time decision at all, and it certainly should
> not be dependent on __LINUX_ARM_ARCH__, which marks the _lowest_ supported
> architecture.
> 
> However, even the idea that it's ARMv7 or later is wrong.  According to
> the ARM ARM, the IT instruction is present in ARMv6T2 as well, which
> means it's ARMv6 too (which would have __LINUX_ARM_ARCH__ = 6).
> 
> Looking at the ARM ARM, these bits are "reserved" in previous non-T2
> architectures, have an undefined value at reset, and are probably zero
> anyway.
> 
> Merely changing __LINUX_ARM_ARCH__ >= 7 to >= 6 should fix the problem,
> and I doubt there's any ARMv6 non-T2 systems out there that would be
> affected by clearing the IT state bits.

Please test the following patch:

8<===
From: Russell King <rmk+kernel@arm.linux.org.uk>
Subject: [PATCH] ARM: fix Thumb2 signal handling when ARMv6 is enabled

When a kernel is built covering ARMv6 to ARMv7, we omit to clear the
IT state when entering a signal handler.  This can cause the first
few instructions to be conditionally executed depending on the parent
context.

In any case, the original test for >= ARMv7 is broken - ARMv6 can have
Thumb-2 support as well, and an ARMv6T2 specific build would omit this
code too.

Relax the test back to ARMv6 or greater.  This results in us always
clearing the IT state bits in the PSR, even on CPUs where these bits
are reserved.  However, they're reserved for the IT state, so this
should cause no harm.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/signal.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

Comments

Tony Lindgren Sept. 14, 2015, 7:02 p.m. UTC | #1
* Russell King - ARM Linux <linux@arm.linux.org.uk> [150914 05:16]:
> On Fri, Sep 11, 2015 at 03:03:07PM +0100, Russell King - ARM Linux wrote:
> > 
> > Merely changing __LINUX_ARM_ARCH__ >= 7 to >= 6 should fix the problem,
> > and I doubt there's any ARMv6 non-T2 systems out there that would be
> > affected by clearing the IT state bits.
> 
> Please test the following patch:

While we're waiting for Grazvydas to test.. Looks good to me:

Acked-by: Tony Lindgren <tony@atomide.com>
H. Nikolaus Schaller Sept. 14, 2015, 7:35 p.m. UTC | #2
Am 14.09.2015 um 21:02 schrieb Tony Lindgren <tony@atomide.com>:

> * Russell King - ARM Linux <linux@arm.linux.org.uk> [150914 05:16]:
>> On Fri, Sep 11, 2015 at 03:03:07PM +0100, Russell King - ARM Linux wrote:
>>> 
>>> Merely changing __LINUX_ARM_ARCH__ >= 7 to >= 6 should fix the problem,
>>> and I doubt there's any ARMv6 non-T2 systems out there that would be
>>> affected by clearing the IT state bits.
>> 
>> Please test the following patch:
> 
> While we're waiting for Grazvydas to test.. Looks good to me:
> 
> Acked-by: Tony Lindgren <tony@atomide.com>

I have tested on:
* GTA04 with DM3730 (OMAP3)
* Pyra prototype with OMAP5432
No X server crashes seen any more.

Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Grazvydas Ignotas Sept. 15, 2015, 5:31 p.m. UTC | #3
On Mon, Sep 14, 2015 at 10:35 PM, Dr. H. Nikolaus Schaller
<hns@goldelico.com> wrote:
>
> Am 14.09.2015 um 21:02 schrieb Tony Lindgren <tony@atomide.com>:
>
>> * Russell King - ARM Linux <linux@arm.linux.org.uk> [150914 05:16]:
>>> On Fri, Sep 11, 2015 at 03:03:07PM +0100, Russell King - ARM Linux wrote:
>>>>
>>>> Merely changing __LINUX_ARM_ARCH__ >= 7 to >= 6 should fix the problem,
>>>> and I doubt there's any ARMv6 non-T2 systems out there that would be
>>>> affected by clearing the IT state bits.
>>>
>>> Please test the following patch:
>>
>> While we're waiting for Grazvydas to test.. Looks good to me:
>>
>> Acked-by: Tony Lindgren <tony@atomide.com>
>
> I have tested on:
> * GTA04 with DM3730 (OMAP3)
> * Pyra prototype with OMAP5432
> No X server crashes seen any more.
>
> Tested-by: H. Nikolaus Schaller <hns@goldelico.com>

Tested-by: Grazvydas Ignotas <notasas@gmail.com>
on OMAP5 uevm running v4.2 built with omap2plus_defconfig.
On v4.3-rc1 hsmmc controller probe is deferred for whatever reason and
never reprobes, so my rootfs is never mounted and I could not test,
but that looks unrelated.

I guess it's worth marking this one for stable.

Gražvydas
Russell King - ARM Linux Sept. 16, 2015, 10:07 a.m. UTC | #4
On Tue, Sep 15, 2015 at 08:31:44PM +0300, Grazvydas Ignotas wrote:
> On Mon, Sep 14, 2015 at 10:35 PM, Dr. H. Nikolaus Schaller
> <hns@goldelico.com> wrote:
> >
> > Am 14.09.2015 um 21:02 schrieb Tony Lindgren <tony@atomide.com>:
> >
> >> * Russell King - ARM Linux <linux@arm.linux.org.uk> [150914 05:16]:
> >>> On Fri, Sep 11, 2015 at 03:03:07PM +0100, Russell King - ARM Linux wrote:
> >>>>
> >>>> Merely changing __LINUX_ARM_ARCH__ >= 7 to >= 6 should fix the problem,
> >>>> and I doubt there's any ARMv6 non-T2 systems out there that would be
> >>>> affected by clearing the IT state bits.
> >>>
> >>> Please test the following patch:
> >>
> >> While we're waiting for Grazvydas to test.. Looks good to me:
> >>
> >> Acked-by: Tony Lindgren <tony@atomide.com>
> >
> > I have tested on:
> > * GTA04 with DM3730 (OMAP3)
> > * Pyra prototype with OMAP5432
> > No X server crashes seen any more.
> >
> > Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
> 
> Tested-by: Grazvydas Ignotas <notasas@gmail.com>
> on OMAP5 uevm running v4.2 built with omap2plus_defconfig.
> On v4.3-rc1 hsmmc controller probe is deferred for whatever reason and
> never reprobes, so my rootfs is never mounted and I could not test,
> but that looks unrelated.

Thanks.

> I guess it's worth marking this one for stable.

Indeed.

Having looked closer at the ARM ARM, these bits on older CPUs are marked
as UNK/SBZP (unknown, should be zero or preserved).  So it's safe to get
rid of that #if entirely.  Removing that #if won't affect the validity
of your testing as you've only tested on ARMv7 platforms with ARMv6
included in the kernel.
diff mbox

Patch

diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index b6cda06b455f..b43b4d360bab 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -343,12 +343,17 @@  setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		 */
 		thumb = handler & 1;
 
-#if __LINUX_ARM_ARCH__ >= 7
+#if __LINUX_ARM_ARCH__ >= 6
 		/*
-		 * Clear the If-Then Thumb-2 execution state
-		 * ARM spec requires this to be all 000s in ARM mode
-		 * Snapdragon S4/Krait misbehaves on a Thumb=>ARM
-		 * signal transition without this.
+		 * Clear the If-Then Thumb-2 execution state.  ARM spec
+		 * requires this to be all 000s in ARM mode.  Snapdragon
+		 * S4/Krait misbehaves on a Thumb=>ARM signal transition
+		 * without this.
+		 *
+		 * We must do this whenever we are running on a Thumb-2
+		 * capable CPU, which includes ARMv6T2.  However, we elect
+		 * to do this whenever we're on an ARMv6 or later CPU for
+		 * simplicity.
 		 */
 		cpsr &= ~PSR_IT_MASK;
 #endif