diff mbox

Armada XP (MV78460): BUG in netdevice.h with maxcpus=2

Message ID 20160108210309.5a728bd7@xhacker (mailing list archive)
State New, archived
Headers show

Commit Message

Jisheng Zhang Jan. 8, 2016, 1:03 p.m. UTC
On Fri, 8 Jan 2016 20:45:23 +0800
Jisheng Zhang <jszhang@marvell.com> wrote:

> Dear Russell,
> 
> On Fri, 8 Jan 2016 10:57:21 +0000 Russell King - ARM Linux wrote:
> 
> > On Fri, Jan 08, 2016 at 06:25:37PM +0800, Jisheng Zhang wrote:  
> > > diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> > > index ed622fa..e1242f4 100644
> > > --- a/drivers/net/ethernet/marvell/mvneta.c
> > > +++ b/drivers/net/ethernet/marvell/mvneta.c
> > > @@ -2446,7 +2446,7 @@ static void mvneta_start_dev(struct mvneta_port *pp)
> > >  	mvneta_port_enable(pp);
> > >  
> > >  	/* Enable polling on the port */
> > > -	for_each_present_cpu(cpu) {
> > > +	for_each_online_cpu(cpu) {
> > >  		struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
> > >  
> > >  		napi_enable(&port->napi);
> > > @@ -2472,7 +2472,7 @@ static void mvneta_stop_dev(struct mvneta_port *pp)
> > >  
> > >  	phy_stop(pp->phy_dev);
> > >  
> > > -	for_each_present_cpu(cpu) {
> > > +	for_each_online_cpu(cpu) {
> > >  		struct mvneta_pcpu_port *port = per_cpu_ptr(pp->ports, cpu);
> > >  
> > >  		napi_disable(&port->napi);
> > > @@ -2907,7 +2907,7 @@ static int mvneta_stop(struct net_device *dev)
> > >  	mvneta_stop_dev(pp);
> > >  	mvneta_mdio_remove(pp);
> > >  	unregister_cpu_notifier(&pp->cpu_notifier);
> > > -	for_each_present_cpu(cpu)
> > > +	for_each_online_cpu(cpu)
> > >  		smp_call_function_single(cpu, mvneta_percpu_disable, pp, true);
> > >  	free_percpu_irq(dev->irq, pp->ports);
> > >  	mvneta_cleanup_rxqs(pp);    
> > 
> > I'm not convinced that this isn't racy - what happens if a CPU is
> > brought online between unregister_cpu_notifier(&pp->cpu_notifier)
> > and the following loop?  We'll end up calling mvneta_percpu_disable()
> > for the new CPU - is that harmless?
> > 
> > Similarly, what if the online CPUs change between mvneta_stop_dev()
> > and mvneta_stop(), and also what about hotplug CPU changes during
> > the startup path?
> > 
> > Secondly, is there a reason for:
> > 
> > 	for_each_online_cpu(cpu)
> > 		smp_call_function_single(cpu, ...)
> > 
> > as opposed to:
> > 
> > 	smp_call_function(mvneta_percpu_disable, pp, true);
> >   
> 
> Yep, thanks for pointing out the race. Before sending out the patch, I prepared
> another *wrong*(IMHO) patch to patch smp_prepare_cpus() in arch/arm/kernel/smp.c.

Here is the patch. I think it could also fix the issue.



> 
> Here is the background:
> I can reproduce this issue on arm but failed to reproduce it on arm64. The key
> is what's present cpu.
> 
> let's assume a quad core system, boot with maxcpus=2, after booting.
> 
> on arm64, present cpus is cpu0, cpu1
> 
> on arm, present cpus is cpu0, cpu1, cpu2 and cpu3.
> 
> the arm core code requires every platform to update the present map in
> platforms' smp_prepare_cpus(), but only two or three platforms do so.
> 
> Then get back to mvneta issue, during startup, mvneta_start_dev() calls
> napi_enable() for each present cpu's port. If userspace ask for online
> cpu2, mvneta_percpu_notifier() will call napi_enable() for cpu2 again,
> so BUG_ON() is triggered.
> 
> I have two solutions:
> 
> 1. as the above patch did, then prevent the race as pointed out by
> get_online_cpus().
> 
> 2. make arm platforms smp_prepare_cpus to update the present map or even
> patch arm core smp_prepare_cpus().
> 
> What's the better solution? Could you please guide me?
> 
> Thanks in advance,
> Jisheng
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b263613..f94c755 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -443,15 +443,31 @@  void __init smp_prepare_cpus(unsigned int max_cpus)
 	 */
 	if (max_cpus > ncores)
 		max_cpus = ncores;
-	if (ncores > 1 && max_cpus) {
-		/*
-		 * Initialise the present map, which describes the set of CPUs
-		 * actually populated at the present time. A platform should
-		 * re-initialize the map in the platforms smp_prepare_cpus()
-		 * if present != possible (e.g. physical hotplug).
-		 */
-		init_cpu_present(cpu_possible_mask);
 
+	/* Don't bother if we're effectively UP */
+	if (max_cpus <= 1)
+		return;
+
+	/*
+	 * Initialise the present map (which describes the set of CPUs
+	 * actually populated at the present time) and release the
+	 * secondaries from the bootloader.
+	 *
+	 * Make sure we online at most (max_cpus - 1) additional CPUs.
+	 */
+	max_cpus--;
+	for_each_possible_cpu(cpu) {
+		if (max_cpus == 0)
+			break;
+
+		if (cpu == smp_processor_id())
+			continue;
+
+		set_cpu_present(cpu, true);
+		max_cpus--;
+	}
+
+	if (ncores > 1 && max_cpus) {
 		/*
 		 * Initialise the SCU if there are more than one CPU
 		 * and let them know where to start.