diff mbox

[RFC,4/5] ARM: sun8i: enable PLL2 on a23/33

Message ID 20160628101325.2522-4-icenowy@aosc.xyz (mailing list archive)
State New, archived
Headers show

Commit Message

Icenowy Zheng June 28, 2016, 10:13 a.m. UTC 
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
---
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 7e05e09..a340cea 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -46,6 +46,7 @@ 
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
@@ -120,6 +121,15 @@ 
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		/* dummy clock until actually implemented */
 		pll5: pll5_clk {
 			#clock-cells = <0>;