| Message ID | 20160829051324.2276-1-stefan@agner.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Aug 28, 2016 at 10:13:22PM -0700, Stefan Agner wrote: > Move SD-card definition to module level. While at it, also disable > write-protect since the Colibri standard does not define a pin for > SD-Card write-protection. > > Signed-off-by: Stefan Agner <stefan@agner.ch> Applied all, thanks.
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 1545661..373ee19 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -138,10 +138,6 @@ }; &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; - no-1-8-v; - cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; keep-power-in-suspend; wakeup-source; status = "okay"; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 0a9d3a8..044b83e 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -251,6 +251,14 @@ dr_mode = "host"; }; +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + no-1-8-v; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + disable-wp; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
Move SD-card definition to module level. While at it, also disable write-protect since the Colibri standard does not define a pin for SD-Card write-protection. Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 4 ---- arch/arm/boot/dts/imx7-colibri.dtsi | 8 ++++++++ 2 files changed, 8 insertions(+), 4 deletions(-)