| Message ID | 20161122155831.8724-3-icenowy@aosc.xyz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Nov 22, 2016 at 11:58:31PM +0800, Icenowy Zheng wrote: > Pine64 have two USB Type-A ports, which are wired to the two ports of > A64 USB PHY, and the lower port is the EHCI/OHCI1 port. > > Enable the necessary nodes to enable the lower USB port to work. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Fixed the prefix and applied, thanks! Maxime
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index c32ebc7..f9a11e6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -57,6 +57,10 @@ }; }; +&ehci1 { + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; @@ -67,8 +71,16 @@ bias-pull-up; }; +&ohci1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&usbphy { + status = "okay"; +};
Pine64 have two USB Type-A ports, which are wired to the two ports of A64 USB PHY, and the lower port is the EHCI/OHCI1 port. Enable the necessary nodes to enable the lower USB port to work. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> --- Changes since v1: - Sort the nodes. arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)