| Message ID | 20161201151112.930-1-rogershimizu@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
[CC Arnd Bergmann] On Fri, Dec 2, 2016 at 12:11 AM, Roger Shimizu <rogershimizu@gmail.com> wrote: > Bug report from Debian [0] shows there's minor changed model of > Linkstation LS-GL that uses the 2nd SATA port of the SoC. > So it's necessary to enable two SATA ports, though for that specific > model only the 2nd one is used. > > [0] https://bugs.debian.org/845611 > > Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") > Reported-by: Ryan Tandy <ryan@nardis.ca> > Tested-by: Ryan Tandy <ryan@nardis.ca> > Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> > --- > arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts > index 1cf644b..51dc734 100644 > --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts > +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts > @@ -82,6 +82,10 @@ > gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; > }; > > +&sata { > + nr-ports = <2>; > +}; > + > &ehci1 { > status = "okay"; > }; > -- > 2.10.2 > Is there any chance to get this simple fix into v4.9 or next v4.10? Thank you!
Hi Roger, On lun., déc. 05 2016, Roger Shimizu <rogershimizu@gmail.com> wrote: > [CC Arnd Bergmann] > > On Fri, Dec 2, 2016 at 12:11 AM, Roger Shimizu <rogershimizu@gmail.com> wrote: >> Bug report from Debian [0] shows there's minor changed model of >> Linkstation LS-GL that uses the 2nd SATA port of the SoC. >> So it's necessary to enable two SATA ports, though for that specific >> model only the 2nd one is used. >> >> [0] https://bugs.debian.org/845611 >> >> Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") >> Reported-by: Ryan Tandy <ryan@nardis.ca> >> Tested-by: Ryan Tandy <ryan@nardis.ca> >> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> >> --- >> arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts >> index 1cf644b..51dc734 100644 >> --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts >> +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts >> @@ -82,6 +82,10 @@ >> gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; >> }; >> >> +&sata { >> + nr-ports = <2>; >> +}; >> + >> &ehci1 { >> status = "okay"; >> }; >> -- >> 2.10.2 >> > > Is there any chance to get this simple fix into v4.9 or next v4.10? > Thank you! I can apply it on mvebu/fixes and make a pull request. But I don't know if Arnd or Olof will get it. Let's see ahow it goes. Gregory > -- > Roger Shimizu, GMT +9 Tokyo > PGP/GPG: 4096R/6C6ACD6417B3ACB1
Hi Roger, On jeu., déc. 01 2016, Roger Shimizu <rogershimizu@gmail.com> wrote: > Bug report from Debian [0] shows there's minor changed model of > Linkstation LS-GL that uses the 2nd SATA port of the SoC. > So it's necessary to enable two SATA ports, though for that specific > model only the 2nd one is used. > > [0] https://bugs.debian.org/845611 > > Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") > Reported-by: Ryan Tandy <ryan@nardis.ca> > Tested-by: Ryan Tandy <ryan@nardis.ca> > Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> Applied on mvebu/fixes Thanks, Gregory > --- > arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts > index 1cf644b..51dc734 100644 > --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts > +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts > @@ -82,6 +82,10 @@ > gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; > }; > > +&sata { > + nr-ports = <2>; > +}; > + > &ehci1 { > status = "okay"; > }; > -- > 2.10.2 >
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts index 1cf644b..51dc734 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts @@ -82,6 +82,10 @@ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; +&sata { + nr-ports = <2>; +}; + &ehci1 { status = "okay"; };
Bug report from Debian [0] shows there's minor changed model of Linkstation LS-GL that uses the 2nd SATA port of the SoC. So it's necessary to enable two SATA ports, though for that specific model only the 2nd one is used. [0] https://bugs.debian.org/845611 Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl") Reported-by: Ryan Tandy <ryan@nardis.ca> Tested-by: Ryan Tandy <ryan@nardis.ca> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com> --- arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++ 1 file changed, 4 insertions(+)