From patchwork Mon Dec 26 17:11:54 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Icenowy Zheng X-Patchwork-Id: 9488679 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 19B8F604B9 for ; Mon, 26 Dec 2016 17:15:11 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 06A4820144 for ; Mon, 26 Dec 2016 17:15:11 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id EDC9826224; Mon, 26 Dec 2016 17:15:10 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-4.1 required=2.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_MED,T_DKIM_INVALID autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 8A2FF20144 for ; Mon, 26 Dec 2016 17:15:09 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.85_2 #1 (Red Hat Linux)) id 1cLYpw-0007NU-SH; Mon, 26 Dec 2016 17:13:24 +0000 Received: from forward7h.cmail.yandex.net ([2a02:6b8:0:f35::e7]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1cLYpp-0007Iw-Dj for linux-arm-kernel@lists.infradead.org; Mon, 26 Dec 2016 17:13:21 +0000 Received: from smtp3j.mail.yandex.net (smtp3j.mail.yandex.net [IPv6:2a02:6b8:0:801:1::12]) by forward7h.cmail.yandex.net (Yandex) with ESMTP id EEBF821A7E; Mon, 26 Dec 2016 20:12:51 +0300 (MSK) Received: from smtp3j.mail.yandex.net (localhost.localdomain [127.0.0.1]) by smtp3j.mail.yandex.net (Yandex) with ESMTP id 95DD86240DB8; Mon, 26 Dec 2016 20:12:41 +0300 (MSK) Received: by smtp3j.mail.yandex.net (nwsmtp/Yandex) with ESMTPSA id 1AuMed9oTh-COZ4kZxF; Mon, 26 Dec 2016 20:12:33 +0300 (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (Client certificate not present) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=aosc.xyz; s=mail; t=1482772360; bh=BslOhCArI9MbRmeRLDqjqhD0NHg/2L1kAtHFQtYItg8=; h=From:To:Cc:Subject:Date:Message-Id; b=NFFQgOVo/YHVImy/TpYYx2CHt33xVT7AFJ1RDCV24EQtn22Cvz6/24R9Ya7yE3OwS UFZOwLprgcSgmE5J3TPfwIVdldmxuH34RJRTENsvWFpqDyKjNNdfxc4DOh1jplehO4 oybqVo7/J6uqRRTwaWbDS+IP2tpf27TnFsgXOvYM= Authentication-Results: smtp3j.mail.yandex.net; dkim=pass header.i=@aosc.xyz X-Yandex-ForeignMX: US X-Yandex-Suid-Status: 1 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1 0, 1 1130000036118848 From: Icenowy Zheng To: Linus Walleij , Chen-Yu Tsai , Maxime Ripard , Rob Herring , Andre Przywara Subject: [PATCH 4/6] arm: dts: sun8i: split Allwinner H3 .dtsi Date: Tue, 27 Dec 2016 01:11:54 +0800 Message-Id: <20161226171156.11605-1-icenowy@aosc.xyz> X-Mailer: git-send-email 2.11.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20161226_091318_219462_FD9803F9 X-CRM114-Status: GOOD ( 15.06 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com, Icenowy Zheng , linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP From: Andre Przywara The new Allwinner H5 SoC is pin-compatible to the H3 SoC, but with the Cortex-A7 cores replaced by Cortex-A53 cores and the MMC controller updated. So we should really share almost the whole .dtsi. In preparation for that move the peripheral parts of the existing sun8i-h3.dtsi into a new sun8i-h3-h5.dtsi. The actual sun8i-h3.dtsi then includes that and defines the H3 specific parts on top of it. On the way get rid of skeleton.dtsi, as recommended in that very file. Signed-off-by: Andre Przywara [Icenowy: also split out mmc , as well as pio and ccu's compatible] Signed-off-by: Icenowy Zheng --- arch/arm/boot/dts/sun8i-h3-h5.dtsi | 536 +++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/sun8i-h3.dtsi | 473 +------------------------------- 2 files changed, 543 insertions(+), 466 deletions(-) create mode 100644 arch/arm/boot/dts/sun8i-h3-h5.dtsi diff --git a/arch/arm/boot/dts/sun8i-h3-h5.dtsi b/arch/arm/boot/dts/sun8i-h3-h5.dtsi new file mode 100644 index 000000000000..ecad824bc65d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-h5.dtsi @@ -0,0 +1,536 @@ +/* + * Copyright (C) 2015 Jens Kuske + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; + + ir_clk: ir_clk@01f01454 { + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01f01454 0x4>; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>; + clock-output-names = "ir"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-h3-dma"; + reg = <0x01c02000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c0f000 0x1000>; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c10000 0x1000>; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c11000 0x1000>; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = ; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@01c1c000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci3: usb@01c1d000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1d000 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@01c1d400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1d400 0x100>; + interrupts = ; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ccu: clock@01c20000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@01c20800 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01c20800 0x400>; + interrupts = , + ; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c0_pins: i2c0 { + pins = "PA11", "PA12"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + pins = "PA18", "PA19"; + function = "i2c1"; + }; + + i2c2_pins: i2c2 { + pins = "PE12", "PE13"; + function = "i2c2"; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + pins = "PF6"; + function = "gpio_in"; + bias-pull-up; + }; + + mmc1_pins_a: mmc1@0 { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_8bit_pins: mmc2_8bit { + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + + spi1_pins: spi1 { + pins = "PA15", "PA16", "PA14", "PA13"; + function = "spi1"; + }; + + uart0_pins_a: uart0@0 { + pins = "PA4", "PA5"; + function = "uart0"; + }; + + uart1_pins: uart1 { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1_rts_cts { + pins = "PG8", "PG9"; + function = "uart1"; + }; + + uart2_pins: uart2 { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + uart3_pins: uart3 { + pins = "PA13", "PA14"; + function = "uart3"; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = , + ; + clocks = <&osc24M>; + }; + + spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = ; + }; + + pwm: pwm@01c21400 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01c21400 0x8>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = , + ; + }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_reset 1>; + interrupts = ; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = ; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + pins = "PL11"; + function = "s_cir_rx"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fe24cda6cb52..a454d2abd8ed 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -40,12 +40,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include -#include -#include #include +#include "sun8i-h3-h5.dtsi" / { interrupt-parent = <&gic>; @@ -87,71 +84,9 @@ ; }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - apb0: apb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01f01428 { - compatible = "allwinner,sun8i-h3-apb0-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01f01428 0x4>; - #clock-cells = <1>; - clocks = <&apb0>; - clock-indices = <0>, <1>; - clock-output-names = "apb0_pio", "apb0_ir"; - }; - - ir_clk: ir_clk@01f01454 { - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01f01454 0x4>; - #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>; - clock-output-names = "ir"; - }; - }; - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun8i-h3-dma"; - reg = <0x01c02000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DMA>; - resets = <&ccu RST_BUS_DMA>; - #dma-cells = <1>; - }; - - mmc0: mmc@01c0f000 { + mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>, <&ccu CLK_MMC0_OUTPUT>, @@ -160,17 +95,10 @@ "mmc", "output", "sample"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = ; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; - mmc1: mmc@01c10000 { + mmc@01c10000 { compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>, <&ccu CLK_MMC1_OUTPUT>, @@ -179,17 +107,10 @@ "mmc", "output", "sample"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = ; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; }; - mmc2: mmc@01c11000 { + mmc@01c11000 { compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>, <&ccu CLK_MMC2_OUTPUT>, @@ -198,217 +119,14 @@ "mmc", "output", "sample"; - resets = <&ccu RST_BUS_MMC2>; - reset-names = "ahb"; - interrupts = ; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usbphy: phy@01c19400 { - compatible = "allwinner,sun8i-h3-usb-phy"; - reg = <0x01c19400 0x2c>, - <0x01c1a800 0x4>, - <0x01c1b800 0x4>, - <0x01c1c800 0x4>, - <0x01c1d800 0x4>; - reg-names = "phy_ctrl", - "pmu0", - "pmu1", - "pmu2", - "pmu3"; - clocks = <&ccu CLK_USB_PHY0>, - <&ccu CLK_USB_PHY1>, - <&ccu CLK_USB_PHY2>, - <&ccu CLK_USB_PHY3>; - clock-names = "usb0_phy", - "usb1_phy", - "usb2_phy", - "usb3_phy"; - resets = <&ccu RST_USB_PHY0>, - <&ccu RST_USB_PHY1>, - <&ccu RST_USB_PHY2>, - <&ccu RST_USB_PHY3>; - reset-names = "usb0_reset", - "usb1_reset", - "usb2_reset", - "usb3_reset"; - status = "disabled"; - #phy-cells = <1>; }; - ehci1: usb@01c1b000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1b000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; - resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci1: usb@01c1b400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1b400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, - <&ccu CLK_USB_OHCI1>; - resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci2: usb@01c1c000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1c000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; - resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci2: usb@01c1c400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1c400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, - <&ccu CLK_USB_OHCI2>; - resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci3: usb@01c1d000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1d000 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; - resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci3: usb@01c1d400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1d400 0x100>; - interrupts = ; - clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, - <&ccu CLK_USB_OHCI3>; - resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ccu: clock@01c20000 { + clock@01c20000 { compatible = "allwinner,sun8i-h3-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; }; - pio: pinctrl@01c20800 { + pinctrl@01c20800 { compatible = "allwinner,sun8i-h3-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = , - ; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; - - i2c0_pins: i2c0 { - pins = "PA11", "PA12"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - pins = "PA18", "PA19"; - function = "i2c1"; - }; - - i2c2_pins: i2c2 { - pins = "PE12", "PE13"; - function = "i2c2"; - }; - - mmc0_pins_a: mmc0@0 { - pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PF6"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_pins_a: mmc1@0 { - pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - function = "mmc1"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc2_8bit_pins: mmc2_8bit { - pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - function = "mmc2"; - drive-strength = <30>; - bias-pull-up; - }; - - spi0_pins: spi0 { - pins = "PC0", "PC1", "PC2", "PC3"; - function = "spi0"; - }; - - spi1_pins: spi1 { - pins = "PA15", "PA16", "PA14", "PA13"; - function = "spi1"; - }; - - uart0_pins_a: uart0@0 { - pins = "PA4", "PA5"; - function = "uart0"; - }; - - uart1_pins: uart1 { - pins = "PG6", "PG7"; - function = "uart1"; - }; - - uart1_rts_cts_pins: uart1_rts_cts { - pins = "PG8", "PG9"; - function = "uart1"; - }; - - uart2_pins: uart2 { - pins = "PA0", "PA1"; - function = "uart2"; - }; - - uart3_pins: uart3 { - pins = "PA13", "PA14"; - function = "uart3"; - }; }; timer@01c20c00 { @@ -419,143 +137,6 @@ clocks = <&osc24M>; }; - spi0: spi@01c68000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c68000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma 23>, <&dma 23>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c69000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c69000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - dmas = <&dma 24>, <&dma 24>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - wdt0: watchdog@01c20ca0 { - compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = ; - }; - - pwm: pwm@01c21400 { - compatible = "allwinner,sun8i-h3-pwm"; - reg = <0x01c21400 0x8>; - clocks = <&osc24M>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART0>; - resets = <&ccu RST_BUS_UART0>; - dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART1>; - resets = <&ccu RST_BUS_UART1>; - dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART2>; - resets = <&ccu RST_BUS_UART2>; - dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART3>; - resets = <&ccu RST_BUS_UART3>; - dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C0>; - resets = <&ccu RST_BUS_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C1>; - resets = <&ccu RST_BUS_I2C1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = ; - clocks = <&ccu CLK_BUS_I2C2>; - resets = <&ccu RST_BUS_I2C2>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, @@ -566,46 +147,6 @@ #interrupt-cells = <3>; interrupts = ; }; - - rtc: rtc@01f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = , - ; - }; - - apb0_reset: reset@01f014b0 { - reg = <0x01f014b0 0x4>; - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; - - ir: ir@01f02000 { - compatible = "allwinner,sun5i-a13-ir"; - clocks = <&apb0_gates 1>, <&ir_clk>; - clock-names = "apb", "ir"; - resets = <&apb0_reset 1>; - interrupts = ; - reg = <0x01f02000 0x40>; - status = "disabled"; - }; - - r_pio: pinctrl@01f02c00 { - compatible = "allwinner,sun8i-h3-r-pinctrl"; - reg = <0x01f02c00 0x400>; - interrupts = ; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - resets = <&apb0_reset 0>; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; - - ir_pins_a: ir@0 { - pins = "PL11"; - function = "s_cir_rx"; - }; - }; }; }; +