| Message ID | 20170129232035.25189-6-chris.packham@alliedtelesis.co.nz (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Chris, On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote: > These boards are Marvell's evaluation boards for the 98DX4251 and > 98DX3336 SoCs. > > Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Applied on mvebu/dt Thanks, Gregory > --- > > Notes: > Changes in v5: > - update license text > - use node labels > Changes in v6: > - Rename dts files to include 'armada-xp-' prefix > > arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++ > arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++ > 2 files changed, 293 insertions(+) > create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts > create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts > > diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts > new file mode 100644 > index 000000000000..a8130805074e > --- /dev/null > +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts > @@ -0,0 +1,151 @@ > +/* > + * Device Tree file for DB-DXBC2 board > + * > + * Copyright (C) 2016 Allied Telesis Labs > + * > + * Based on armada-xp-db.dts > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + * > + * Note: this Device Tree assumes that the bootloader has remapped the > + * internal registers to 0xf1000000 (instead of the default > + * 0xd0000000). The 0xf1000000 is the default used by the recent, > + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier > + * boards were delivered with an older version of the bootloader that > + * left internal registers mapped at 0xd0000000. If you are in this > + * situation, you should either update your bootloader (preferred > + * solution) or the below Device Tree should be adjusted. > + */ > + > +/dts-v1/; > +#include "armada-xp-98dx4251.dtsi" > + > +/ { > + model = "Marvell Bobcat2 Evaluation Board"; > + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ > + }; > + > +}; > + > +&devbus_bootcs { > + status = "okay"; > + > + /* Device Bus parameters are required */ > + > + /* Read parameters */ > + devbus,bus-width = <16>; > + devbus,turn-off-ps = <60000>; > + devbus,badr-skew-ps = <0>; > + devbus,acc-first-ps = <124000>; > + devbus,acc-next-ps = <248000>; > + devbus,rd-setup-ps = <0>; > + devbus,rd-hold-ps = <0>; > + > + /* Write parameters */ > + devbus,sync-enable = <0>; > + devbus,wr-high-ps = <60000>; > + devbus,wr-low-ps = <60000>; > + devbus,ale-wr-ps = <60000>; > +}; > + > +&i2c0 { > + clock-frequency = <100000>; > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&nand { > + status = "okay"; > + num-cs = <1>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > +}; > + > +&sdio { > + pinctrl-0 = <&sdio_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + /* No CD or WP GPIOs */ > + broken-cd; > +}; > + > +&spi0 { > + status = "okay"; > + > + spi-flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "m25p64"; > + reg = <0>; /* Chip select 0 */ > + spi-max-frequency = <20000000>; > + m25p,fast-read; > + > + partition@u-boot { > + reg = <0x00000000 0x00100000>; > + label = "u-boot"; > + }; > + partition@u-boot-env { > + reg = <0x00100000 0x00040000>; > + label = "u-boot-env"; > + }; > + partition@unused { > + reg = <0x00140000 0x00ec0000>; > + label = "unused"; > + }; > + > + }; > +}; > diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts > new file mode 100644 > index 000000000000..4e07cb6ed800 > --- /dev/null > +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts > @@ -0,0 +1,142 @@ > +/* > + * Device Tree file for DB-XC3-24G4XG board > + * > + * Copyright (C) 2016 Allied Telesis Labs > + * > + * Based on armada-xp-db.dts > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + * > + * Note: this Device Tree assumes that the bootloader has remapped the > + * internal registers to 0xf1000000 (instead of the default > + * 0xd0000000). The 0xf1000000 is the default used by the recent, > + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier > + * boards were delivered with an older version of the bootloader that > + * left internal registers mapped at 0xd0000000. If you are in this > + * situation, you should either update your bootloader (preferred > + * solution) or the below Device Tree should be adjusted. > + */ > + > +/dts-v1/; > +#include "armada-xp-98dx3336.dtsi" > + > +/ { > + model = "DB-XC3-24G4XG"; > + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp"; > + > + chosen { > + bootargs = "console=ttyS0,115200 earlyprintk"; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ > + }; > +}; > + > +&devbus_bootcs { > + status = "okay"; > + > + /* Device Bus parameters are required */ > + > + /* Read parameters */ > + devbus,bus-width = <16>; > + devbus,turn-off-ps = <60000>; > + devbus,badr-skew-ps = <0>; > + devbus,acc-first-ps = <124000>; > + devbus,acc-next-ps = <248000>; > + devbus,rd-setup-ps = <0>; > + devbus,rd-hold-ps = <0>; > + > + /* Write parameters */ > + devbus,sync-enable = <0>; > + devbus,wr-high-ps = <60000>; > + devbus,wr-low-ps = <60000>; > + devbus,ale-wr-ps = <60000>; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&uart1 { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <100000>; > + status = "okay"; > +}; > + > +&nand { > + status = "okay"; > + num-cs = <1>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > +}; > + > +&spi0 { > + status = "okay"; > + > + spi-flash@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "m25p64"; > + reg = <0>; /* Chip select 0 */ > + spi-max-frequency = <20000000>; > + m25p,fast-read; > + > + partition@u-boot { > + reg = <0x00000000 0x00100000>; > + label = "u-boot"; > + }; > + partition@u-boot-env { > + reg = <0x00100000 0x00040000>; > + label = "u-boot-env"; > + }; > + partition@unused { > + reg = <0x00140000 0x00ec0000>; > + label = "unused"; > + }; > + > + }; > +}; > -- > 2.11.0.24.ge6920cf >
Hi Gregory, On 31/01/17 03:29, Gregory CLEMENT wrote: > Hi Chris, > > On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote: > >> These boards are Marvell's evaluation boards for the 98DX4251 and >> 98DX3336 SoCs. >> >> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> > > Applied on mvebu/dt > I just noticed that I hadn't updated arch/arm/boot/dts/Makefile. The way I've been building things (explicitly running 'make armada-xp-db-xc3-24g4xg.dtb') it hasn't mattered to me but I'm wondering if I should have? >> --- >> >> Notes: >> Changes in v5: >> - update license text >> - use node labels >> Changes in v6: >> - Rename dts files to include 'armada-xp-' prefix >> >> arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++ >> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++ >> 2 files changed, 293 insertions(+) >> create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts >> create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts >>
Hi Chris, On lun., janv. 30 2017, Chris Packham <Chris.Packham@alliedtelesis.co.nz> wrote: > Hi Gregory, > > On 31/01/17 03:29, Gregory CLEMENT wrote: >> Hi Chris, >> >> On lun., janv. 30 2017, Chris Packham <chris.packham@alliedtelesis.co.nz> wrote: >> >>> These boards are Marvell's evaluation boards for the 98DX4251 and >>> 98DX3336 SoCs. >>> >>> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> >> >> Applied on mvebu/dt >> > > I just noticed that I hadn't updated arch/arm/boot/dts/Makefile. The way > I've been building things (explicitly running 'make > armada-xp-db-xc3-24g4xg.dtb') it hasn't mattered to me but I'm wondering > if I should have? As I didn't make a Pull request yet, I was able to fix it on the fly. Gregory > >>> --- >>> >>> Notes: >>> Changes in v5: >>> - update license text >>> - use node labels >>> Changes in v6: >>> - Rename dts files to include 'armada-xp-' prefix >>> >>> arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++ >>> arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++ >>> 2 files changed, 293 insertions(+) >>> create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts >>> create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts >>> >
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts new file mode 100644 index 000000000000..a8130805074e --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts @@ -0,0 +1,151 @@ +/* + * Device Tree file for DB-DXBC2 board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx4251.dtsi" + +/ { + model = "Marvell Bobcat2 Evaluation Board"; + compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */ + }; + +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&sdio { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts new file mode 100644 index 000000000000..4e07cb6ed800 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts @@ -0,0 +1,142 @@ +/* + * Device Tree file for DB-XC3-24G4XG board + * + * Copyright (C) 2016 Allied Telesis Labs + * + * Based on armada-xp-db.dts + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Note: this Device Tree assumes that the bootloader has remapped the + * internal registers to 0xf1000000 (instead of the default + * 0xd0000000). The 0xf1000000 is the default used by the recent, + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier + * boards were delivered with an older version of the bootloader that + * left internal registers mapped at 0xd0000000. If you are in this + * situation, you should either update your bootloader (preferred + * solution) or the below Device Tree should be adjusted. + */ + +/dts-v1/; +#include "armada-xp-98dx3336.dtsi" + +/ { + model = "DB-XC3-24G4XG"; + compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x40000000>; /* 1 GB */ + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <16>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; +}; + +&nand { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + m25p,fast-read; + + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00ec0000>; + label = "unused"; + }; + + }; +};
These boards are Marvell's evaluation boards for the 98DX4251 and 98DX3336 SoCs. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> --- Notes: Changes in v5: - update license text - use node labels Changes in v6: - Rename dts files to include 'armada-xp-' prefix arch/arm/boot/dts/armada-xp-db-dxbc2.dts | 151 ++++++++++++++++++++++++++ arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts | 142 ++++++++++++++++++++++++ 2 files changed, 293 insertions(+) create mode 100644 arch/arm/boot/dts/armada-xp-db-dxbc2.dts create mode 100644 arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts