@@ -18,3 +18,36 @@ endif
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
endif
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-y
+ "/^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-y); \
+ echo ""; \
+ echo "#endif" )
+endef
+
+arch/arm/mach-at91/pm_data-offsets.s: arch/arm/mach-at91/pm_data-offsets.c
+ $(call if_changed_dep,cc_s_c)
+
+include/generated/at91_pm_data-offsets.h: arch/arm/mach-at91/pm_data-offsets.s FORCE
+ $(call filechk,offsets,__PM_DATA_OFFSETS_H__)
+
+arch/arm/mach-at91/pm_suspend.o: include/generated/at91_pm_data-offsets.h
@@ -37,18 +37,13 @@ extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
#endif
-static struct {
- void __iomem *pmc;
- void __iomem *ramc[2];
- unsigned long uhp_udp_mask;
- int memctrl;
-} at91_pm_data;
+static struct at91_pm_data pm_data;
#define at91_ramc_read(id, field) \
- __raw_readl(at91_pm_data.ramc[id] + field)
+ __raw_readl(pm_data.ramc[id] + field)
#define at91_ramc_write(id, field, value) \
- __raw_writel(value, at91_pm_data.ramc[id] + field)
+ __raw_writel(value, pm_data.ramc[id] + field)
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -84,10 +79,10 @@ static int at91_pm_verify_clocks(void)
unsigned long scsr;
int i;
- scsr = readl(at91_pm_data.pmc + AT91_PMC_SCSR);
+ scsr = readl(pm_data.pmc + AT91_PMC_SCSR);
/* USB must not be using PLLB */
- if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
+ if ((scsr & pm_data.uhp_udp_mask) != 0) {
pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
@@ -98,7 +93,7 @@ static int at91_pm_verify_clocks(void)
if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
continue;
- css = readl(at91_pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+ css = readl(pm_data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
if (css != AT91_PMC_CSS_SLOW) {
pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
return 0;
@@ -124,25 +119,18 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
-static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
- void __iomem *ramc1, int memctrl);
-
-extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
- void __iomem *ramc1, int memctrl);
+static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
+extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
- unsigned int pm_data = at91_pm_data.memctrl;
-
- pm_data |= (state == PM_SUSPEND_MEM) ?
- AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
+ pm_data.mode = (state == PM_SUSPEND_MEM) ? AT91_PM_SLOW_CLOCK : 0;
flush_cache_all();
outer_disable();
- at91_suspend_sram_fn(at91_pm_data.pmc, at91_pm_data.ramc[0],
- at91_pm_data.ramc[1], pm_data);
+ at91_suspend_sram_fn(&pm_data);
outer_resume();
}
@@ -245,7 +233,7 @@ static void at91rm9200_standby(void)
" mcr p15, 0, %0, c7, c0, 4\n\t"
" str %5, [%1, %2]"
:
- : "r" (0), "r" (at91_pm_data.ramc[0]), "r" (AT91_MC_SDRAMC_LPR),
+ : "r" (0), "r" (pm_data.ramc[0]), "r" (AT91_MC_SDRAMC_LPR),
"r" (1), "r" (AT91_MC_SDRAMC_SRR),
"r" (lpr));
}
@@ -260,7 +248,7 @@ static void at91_ddr_standby(void)
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (at91_pm_data.ramc[1]) {
+ if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
@@ -272,13 +260,13 @@ static void at91_ddr_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
- if (at91_pm_data.ramc[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (at91_pm_data.ramc[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
@@ -290,7 +278,7 @@ static void at91sam9_sdram_standby(void)
u32 lpr0, lpr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
- if (at91_pm_data.ramc[1]) {
+ if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
@@ -302,13 +290,13 @@ static void at91sam9_sdram_standby(void)
/* self-refresh mode now */
at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
- if (at91_pm_data.ramc[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
cpu_do_idle();
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
- if (at91_pm_data.ramc[1])
+ if (pm_data.ramc[1])
at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
}
@@ -328,8 +316,8 @@ static __init void at91_dt_ramc(void)
const void *standby = NULL;
for_each_matching_node_and_match(np, ramc_ids, &of_id) {
- at91_pm_data.ramc[idx] = of_iomap(np, 0);
- if (!at91_pm_data.ramc[idx])
+ pm_data.ramc[idx] = of_iomap(np, 0);
+ if (!pm_data.ramc[idx])
panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
if (!standby)
@@ -355,12 +343,12 @@ static void at91rm9200_idle(void)
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
- writel(AT91_PMC_PCK, at91_pm_data.pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
}
static void at91sam9_idle(void)
{
- writel(AT91_PMC_PCK, at91_pm_data.pmc + AT91_PMC_SCDR);
+ writel(AT91_PMC_PCK, pm_data.pmc + AT91_PMC_SCDR);
cpu_do_idle();
}
@@ -429,8 +417,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
platform_device_register(&at91_cpuidle_device);
pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
- at91_pm_data.pmc = of_iomap(pmc_np, 0);
- if (!at91_pm_data.pmc) {
+ pm_data.pmc = of_iomap(pmc_np, 0);
+ if (!pm_data.pmc) {
pr_err("AT91: PM not supported, PMC not found\n");
return;
}
@@ -455,8 +443,8 @@ void __init at91rm9200_pm_init(void)
*/
at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
- at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_MC;
+ pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
+ pm_data.memctrl = AT91_MEMCTRL_MC;
at91_pm_init(at91rm9200_idle);
}
@@ -464,31 +452,31 @@ void __init at91rm9200_pm_init(void)
void __init at91sam9260_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
+ pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
at91_pm_init(at91sam9_idle);
}
void __init at91sam9g45_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
+ pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(at91sam9_idle);
}
void __init at91sam9x5_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(at91sam9_idle);
}
void __init sama5_pm_init(void)
{
at91_dt_ramc();
- at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
- at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+ pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+ pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
at91_pm_init(NULL);
}
@@ -21,12 +21,16 @@
#define AT91_MEMCTRL_SDRAMC 1
#define AT91_MEMCTRL_DDRSDR 2
-#define AT91_PM_MEMTYPE_MASK 0x0f
-
-#define AT91_PM_MODE_OFFSET 4
-#define AT91_PM_MODE_MASK 0x01
-#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
-
#define AT91_PM_SLOW_CLOCK 0x01
+#ifndef __ASSEMBLY__
+struct at91_pm_data {
+ void __iomem *pmc;
+ void __iomem *ramc[2];
+ unsigned long uhp_udp_mask;
+ unsigned int memctrl;
+ unsigned int mode;
+};
+#endif
+
#endif
new file mode 100644
@@ -0,0 +1,13 @@
+#include <linux/stddef.h>
+#include <linux/kbuild.h>
+#include "pm.h"
+
+int main(void)
+{
+ DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc));
+ DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0]));
+ DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1]));
+ DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl));
+ DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
+ return 0;
+}
@@ -14,6 +14,7 @@
#include <linux/linkage.h>
#include <linux/clk/at91_pmc.h>
#include "pm.h"
+#include "generated/at91_pm_data-offsets.h"
#define SRAMC_SELF_FRESH_ACTIVE 0x01
#define SRAMC_SELF_FRESH_EXIT 0x00
@@ -72,13 +73,9 @@ tmp2 .req r5
.arm
/*
- * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
- * void __iomem *ramc1, int memctrl)
+ * void at91_suspend_sram_fn(struct at91_pm_data*)
* @input param:
- * @r0: base address of AT91_PMC
- * @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
- * @r2: base address of second SDRAM Controller or 0 if not present
- * @r3: pm information
+ * @r0: base address of struct at91_pm_data
*/
/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
.align 3
@@ -90,16 +87,16 @@ ENTRY(at91_pm_suspend_in_sram)
mov tmp1, #0
mcr p15, 0, tmp1, c7, c10, 4
- str r0, .pmc_base
- str r1, .sramc_base
- str r2, .sramc1_base
-
- and r0, r3, #AT91_PM_MEMTYPE_MASK
- str r0, .memtype
-
- lsr r0, r3, #AT91_PM_MODE_OFFSET
- and r0, r0, #AT91_PM_MODE_MASK
- str r0, .pm_mode
+ ldr tmp1, [r0, #PM_DATA_PMC]
+ str tmp1, .pmc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC0]
+ str tmp1, .sramc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC1]
+ str tmp1, .sramc1_base
+ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+ str tmp1, .memtype
+ ldr tmp1, [r0, #PM_DATA_MODE]
+ str tmp1, .pm_mode
/* Active the self-refresh mode */
mov r0, #SRAMC_SELF_FRESH_ACTIVE
The number of register we can safely pass to at91_pm_suspend_in_sram is limited. Instead, pass the address to the at91_pm_data structure. The offsets are automatically generated to avoid hardcoding them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- arch/arm/mach-at91/Makefile | 33 +++++++++++++++ arch/arm/mach-at91/pm.c | 78 +++++++++++++++--------------------- arch/arm/mach-at91/pm.h | 16 +++++--- arch/arm/mach-at91/pm_data-offsets.c | 13 ++++++ arch/arm/mach-at91/pm_suspend.S | 29 ++++++-------- 5 files changed, 102 insertions(+), 67 deletions(-) create mode 100644 arch/arm/mach-at91/pm_data-offsets.c