@@ -241,12 +241,27 @@ static void at91_ddr_standby(void)
/* Those two values allow us to delay self-refresh activation
* to the maximum. */
u32 lpr0, lpr1 = 0;
+ u32 mdr, saved_mdr0, saved_mdr1 = 0;
u32 saved_lpr0, saved_lpr1 = 0;
+ /* LPDDR1 --> force DDR2 mode during self-refresh */
+ saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
+ if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+ mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
+ mdr |= AT91_DDRSDRC_MD_DDR2;
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
+ }
+
if (pm_data.ramc[1]) {
saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+ saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
+ if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+ mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
+ mdr |= AT91_DDRSDRC_MD_DDR2;
+ at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
+ }
}
saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
@@ -260,9 +275,12 @@ static void at91_ddr_standby(void)
cpu_do_idle();
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
- if (pm_data.ramc[1])
+ if (pm_data.ramc[1]) {
+ at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+ }
}
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
As already explained for pm_suspend.S, the DDRSDR controller fails to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- arch/arm/mach-at91/pm.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)