diff mbox

[1/4] ARM: dts: armada-xp-98dx3236: combine dfx server nodes

Message ID 20170203034012.29399-2-chris.packham@alliedtelesis.co.nz (mailing list archive)
State New, archived
Headers show

Commit Message

Chris Packham Feb. 3, 2017, 3:40 a.m. UTC
Rather than having a separate node for the dfx server add a reg property
to the parent node. This give somes compatibility with the Marvell
supplied SDK.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 Documentation/devicetree/bindings/net/marvell,prestera.txt | 13 +++++--------
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi                  |  8 ++------
 2 files changed, 7 insertions(+), 14 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 5fbab29718e8..c329608fa887 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -32,19 +32,16 @@  DFX Server bindings
 -------------------
 
 Required properties:
-- compatible: must be "marvell,dfx-server"
+- compatible: must be "marvell,dfx-server", "simple-bus"
+- ranges: describes the address mapping of a memory-mapped bus.
 - reg: address and length of the register set for the device.
 
 Example:
 
-dfx-registers {
-	compatible = "simple-bus";
+dfx-server {
+	compatible = "marvell,dfx-server", "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-
-	dfx: dfx@0 {
-		compatible = "marvell,dfx-server";
-		reg = <0 0x100000>;
-	};
+	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index f6a03dcee5ef..bd8261fdec81 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -195,11 +195,12 @@ 
 			};
 		};
 
-		dfxr: dfx-registers@ac000000 {
+		dfx: dfx-server@ac000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 
 			dfx_coredivclk: corediv-clock@f8268 {
 				compatible = "marvell,mv98dx3236-corediv-clock";
@@ -208,11 +209,6 @@ 
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
-
-			dfx: dfx@0 {
-				compatible = "marvell,dfx-server";
-				reg = <0 0x100000>;
-			};
 		};
 
 		switch: switch@a8000000 {