diff mbox

[v3,15/18] ARM: dtsi: axp209: add battery power supply subnode

Message ID 20170214094112.27426-16-quentin.schulz@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Quentin Schulz Feb. 14, 2017, 9:41 a.m. UTC
The X-Powers AXP209 PMIC exposes battery supply various data such as
the battery status (charging, discharging, full, dead), current max
limit, current current, battery capacity (in percentage), voltage max
and min limits, current voltage, and battery capacity (in Ah).

This adds the battery power supply subnode for AXP20X PMIC.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

v2:
 - changed DT node name from battery_power_supply to
 battery-power-supply,
 - removed io-channels and io-channel-names from DT (the IIO mapping is
 done in the IIO ADC driver now),

 arch/arm/boot/dts/axp209.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Chen-Yu Tsai Feb. 21, 2017, 4:47 a.m. UTC | #1
On Tue, Feb 14, 2017 at 5:41 PM, Quentin Schulz
<quentin.schulz@free-electrons.com> wrote:
> The X-Powers AXP209 PMIC exposes battery supply various data such as
> the battery status (charging, discharging, full, dead), current max
> limit, current current, battery capacity (in percentage), voltage max
> and min limits, current voltage, and battery capacity (in Ah).
>
> This adds the battery power supply subnode for AXP20X PMIC.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Acked-by: Chen-Yu Tsai <wens@csie.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 9677dd5..3c8fa26 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -64,6 +64,11 @@ 
 		#gpio-cells = <2>;
 	};
 
+	battery_power_supply: battery-power-supply {
+		compatible = "x-powers,axp209-battery-power-supply";
+		status = "disabled";
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <1500>;