[RESEND,2/3] pwm: lpc32xx: switch driver to one phandle argument for PWM consumers

Commit Message

Sylvain Lemieux Feb. 16, 2017, 8:27 p.m. UTC

From: Vladimir Zapolskiy <[e-mail]>

NXP LPC32xx SoCs have two simple independent PWM controllers with a single
output each, in this case there is no need to specify PWM channel argument
on client side, one cell for setting PWM output frequency is sufficient.

The change adds private of_xlate() handling of a single cell value given
with a PWM phandle on client side, the handling is taken from the PXA PWM
driver.

Signed-off-by: Vladimir Zapolskiy <[e-mail]>
Reviewed-by: Sylvain Lemieux <[e-mail]>
---
 drivers/pwm/pwm-lpc32xx.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Patch

diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
index a9b3cff96aac..ce8418101e85 100644
--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -92,6 +92,20 @@  static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	clk_disable_unprepare(lpc32xx->clk);
 }
 
+static struct pwm_device *lpc32xx_pwm_of_xlate(struct pwm_chip *pc,
+				       const struct of_phandle_args *args)
+{
+	struct pwm_device *pwm;
+
+	pwm = pwm_request_from_chip(pc, 0, NULL);
+	if (IS_ERR(pwm))
+		return pwm;
+
+	pwm->args.period = args->args[0];
+
+	return pwm;
+}
+
 static const struct pwm_ops lpc32xx_pwm_ops = {
 	.config = lpc32xx_pwm_config,
 	.enable = lpc32xx_pwm_enable,
@@ -123,6 +137,8 @@  static int lpc32xx_pwm_probe(struct platform_device *pdev)
 	lpc32xx->chip.ops = &lpc32xx_pwm_ops;
 	lpc32xx->chip.npwm = 1;
 	lpc32xx->chip.base = -1;
+	lpc32xx->chip.of_xlate = lpc32xx_pwm_of_xlate;
+	lpc32xx->chip.of_pwm_n_cells = 1;
 
 	ret = pwmchip_add(&lpc32xx->chip);
 	if (ret < 0) {