diff mbox

[v4] reset: Add i.MX7 SRC reset driver

Message ID 20170221161331.17012-1-andrew.smirnov@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andrey Smirnov Feb. 21, 2017, 4:13 p.m. UTC 
Add reset controller driver exposing various reset faculties,
implemented by System Reset Controller IP block.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---

Changes since v3 (see [v3]):

	- Convert code IMX7_RESET_PCIEPHY to change G_RST and BTNRST
          simultaneously to make all resets be representable as
          signal->bit in signal->offset register

	- Convert assert/deassert subroutines to be special cases of a
          common reset subroutine

Changes since v2 (see [v2]):

	- Fix typos

	- Kconfig/Makefile chagnes account for alphabetical sorting of
          those files

	- Remove redundant includes

	- Make use of regmap_attach_dev and avoid storing refernce to
          struct *dev in private data

	- Change code and headers to expose almost all of the reset
          related bits in SRC IP block

Changes since v1 (see [v1]):

	- Various small DT bindings description fixes as per feedback
          from Rob Herring


[v1] https://lkml.org/lkml/2017/2/6/554
[v2] https://lkml.org/lkml/2017/2/13/488
[v3] https://lkml.org/lkml/2017/2/20/344


 .../devicetree/bindings/reset/fsl,imx7-src.txt     |  47 ++++++
 drivers/reset/Kconfig                              |   8 ++
 drivers/reset/Makefile                             |   2 +
 drivers/reset/reset-imx7.c                         | 158 +++++++++++++++++++++
 include/dt-bindings/reset/imx7-reset.h             |  62 ++++++++
 5 files changed, 277 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
 create mode 100644 drivers/reset/reset-imx7.c
 create mode 100644 include/dt-bindings/reset/imx7-reset.h

Comments

Rob Herring (Arm) Feb. 27, 2017, 8:54 p.m. UTC | #1 
On Tue, Feb 21, 2017 at 08:13:31AM -0800, Andrey Smirnov wrote:
> Add reset controller driver exposing various reset faculties,
> implemented by System Reset Controller IP block.
> 
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> 
> Changes since v3 (see [v3]):
> 
> 	- Convert code IMX7_RESET_PCIEPHY to change G_RST and BTNRST
>           simultaneously to make all resets be representable as
>           signal->bit in signal->offset register
> 
> 	- Convert assert/deassert subroutines to be special cases of a
>           common reset subroutine
> 
> Changes since v2 (see [v2]):
> 
> 	- Fix typos
> 
> 	- Kconfig/Makefile chagnes account for alphabetical sorting of
>           those files
> 
> 	- Remove redundant includes
> 
> 	- Make use of regmap_attach_dev and avoid storing refernce to
>           struct *dev in private data
> 
> 	- Change code and headers to expose almost all of the reset
>           related bits in SRC IP block
> 
> Changes since v1 (see [v1]):
> 
> 	- Various small DT bindings description fixes as per feedback
>           from Rob Herring
> 
> 
> [v1] https://lkml.org/lkml/2017/2/6/554
> [v2] https://lkml.org/lkml/2017/2/13/488
> [v3] https://lkml.org/lkml/2017/2/20/344
> 
> 
>  .../devicetree/bindings/reset/fsl,imx7-src.txt     |  47 ++++++

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/reset/Kconfig                              |   8 ++
>  drivers/reset/Makefile                             |   2 +
>  drivers/reset/reset-imx7.c                         | 158 +++++++++++++++++++++
>  include/dt-bindings/reset/imx7-reset.h             |  62 ++++++++
>  5 files changed, 277 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>  create mode 100644 drivers/reset/reset-imx7.c
>  create mode 100644 include/dt-bindings/reset/imx7-reset.h
Philipp Zabel Feb. 28, 2017, 2:38 p.m. UTC | #2 
On Tue, 2017-02-21 at 08:13 -0800, Andrey Smirnov wrote:
> Add reset controller driver exposing various reset faculties,
> implemented by System Reset Controller IP block.
> 
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> 
> Changes since v3 (see [v3]):
> 
> 	- Convert code IMX7_RESET_PCIEPHY to change G_RST and BTNRST
>           simultaneously to make all resets be representable as
>           signal->bit in signal->offset register
> 
> 	- Convert assert/deassert subroutines to be special cases of a
>           common reset subroutine
> 
> Changes since v2 (see [v2]):
> 
> 	- Fix typos
> 
> 	- Kconfig/Makefile chagnes account for alphabetical sorting of
>           those files
> 
> 	- Remove redundant includes
> 
> 	- Make use of regmap_attach_dev and avoid storing refernce to
>           struct *dev in private data
> 
> 	- Change code and headers to expose almost all of the reset
>           related bits in SRC IP block
> 
> Changes since v1 (see [v1]):
> 
> 	- Various small DT bindings description fixes as per feedback
>           from Rob Herring
> 
> 
> [v1] https://lkml.org/lkml/2017/2/6/554
> [v2] https://lkml.org/lkml/2017/2/13/488
> [v3] https://lkml.org/lkml/2017/2/20/344
> 
> 
>  .../devicetree/bindings/reset/fsl,imx7-src.txt     |  47 ++++++
>  drivers/reset/Kconfig                              |   8 ++
>  drivers/reset/Makefile                             |   2 +
>  drivers/reset/reset-imx7.c                         | 158 +++++++++++++++++++++
>  include/dt-bindings/reset/imx7-reset.h             |  62 ++++++++
>  5 files changed, 277 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>  create mode 100644 drivers/reset/reset-imx7.c
>  create mode 100644 include/dt-bindings/reset/imx7-reset.h
> 
> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> new file mode 100644
> index 0000000..5e1afc3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> @@ -0,0 +1,47 @@
> +Freescale i.MX7 System Reset Controller
> +======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7-src", "syscon"
> +- reg: should be register base and length as documented in the
> +  datasheet
> +- interrupts: Should contain SRC interrupt
> +- #reset-cells: 1, see below
> +
> +example:
> +
> +src: reset-controller@30390000 {
> +     compatible = "fsl,imx7d-src", "syscon";
> +     reg = <0x30390000 0x2000>;
> +     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> +     #reset-cells = <1>;
> +};
> +
> +
> +Specifying reset lines connected to IP modules
> +==============================================
> +
> +The system reset controller can be used to reset various set of
> +peripherals. Device nodes that need access to reset lines should
> +specify them as a reset phandle in their corresponding node as
> +specified in reset.txt.
> +
> +Example:
> +
> +	pcie: pcie@33800000 {
> +
> +		...
> +
> +		resets = <&src IMX7_RESET_PCIEPHY>,
> +			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
> +		reset-names = "pciephy", "apps";
> +
> +		...
> +        };
> +
> +
> +For list of all valid reset indicies see
> +<dt-bindings/reset/imx7-reset.h>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 172dc96..bea1800 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -27,6 +27,14 @@ config RESET_BERLIN
>  	help
>  	  This enables the reset controller driver for Marvell Berlin SoCs.
>  
> +config RESET_IMX7
> +	bool "i.MX7 Reset Driver"
> +	depends on SOC_IMX7D || COMPILE_TEST
> +	select MFD_SYSCON
> +	default SOC_IMX7D

Can we make this

config RESET_IMX7
	bool "i.MX7 Reset Driver" if COMPILE_TEST
	default SOC_IMX7D
	select MFD_SYSCON

instead?

If you agree, I can fix it up while applying.

regards
Philipp
Andrey Smirnov Feb. 28, 2017, 7:46 p.m. UTC | #3 
On Tue, Feb 28, 2017 at 6:38 AM, Philipp Zabel <p.zabel@pengutronix.de> wrote:
> On Tue, 2017-02-21 at 08:13 -0800, Andrey Smirnov wrote:
>> Add reset controller driver exposing various reset faculties,
>> implemented by System Reset Controller IP block.
>>
>> Cc: Lucas Stach <l.stach@pengutronix.de>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: devicetree@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Cc: linux-arm-kernel@lists.infradead.org
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>> ---
>>
>> Changes since v3 (see [v3]):
>>
>>       - Convert code IMX7_RESET_PCIEPHY to change G_RST and BTNRST
>>           simultaneously to make all resets be representable as
>>           signal->bit in signal->offset register
>>
>>       - Convert assert/deassert subroutines to be special cases of a
>>           common reset subroutine
>>
>> Changes since v2 (see [v2]):
>>
>>       - Fix typos
>>
>>       - Kconfig/Makefile chagnes account for alphabetical sorting of
>>           those files
>>
>>       - Remove redundant includes
>>
>>       - Make use of regmap_attach_dev and avoid storing refernce to
>>           struct *dev in private data
>>
>>       - Change code and headers to expose almost all of the reset
>>           related bits in SRC IP block
>>
>> Changes since v1 (see [v1]):
>>
>>       - Various small DT bindings description fixes as per feedback
>>           from Rob Herring
>>
>>
>> [v1] https://lkml.org/lkml/2017/2/6/554
>> [v2] https://lkml.org/lkml/2017/2/13/488
>> [v3] https://lkml.org/lkml/2017/2/20/344
>>
>>
>>  .../devicetree/bindings/reset/fsl,imx7-src.txt     |  47 ++++++
>>  drivers/reset/Kconfig                              |   8 ++
>>  drivers/reset/Makefile                             |   2 +
>>  drivers/reset/reset-imx7.c                         | 158 +++++++++++++++++++++
>>  include/dt-bindings/reset/imx7-reset.h             |  62 ++++++++
>>  5 files changed, 277 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>>  create mode 100644 drivers/reset/reset-imx7.c
>>  create mode 100644 include/dt-bindings/reset/imx7-reset.h
>>
>> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>> new file mode 100644
>> index 0000000..5e1afc3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
>> @@ -0,0 +1,47 @@
>> +Freescale i.MX7 System Reset Controller
>> +======================================
>> +
>> +Please also refer to reset.txt in this directory for common reset
>> +controller binding usage.
>> +
>> +Required properties:
>> +- compatible: Should be "fsl,imx7-src", "syscon"
>> +- reg: should be register base and length as documented in the
>> +  datasheet
>> +- interrupts: Should contain SRC interrupt
>> +- #reset-cells: 1, see below
>> +
>> +example:
>> +
>> +src: reset-controller@30390000 {
>> +     compatible = "fsl,imx7d-src", "syscon";
>> +     reg = <0x30390000 0x2000>;
>> +     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>> +     #reset-cells = <1>;
>> +};
>> +
>> +
>> +Specifying reset lines connected to IP modules
>> +==============================================
>> +
>> +The system reset controller can be used to reset various set of
>> +peripherals. Device nodes that need access to reset lines should
>> +specify them as a reset phandle in their corresponding node as
>> +specified in reset.txt.
>> +
>> +Example:
>> +
>> +     pcie: pcie@33800000 {
>> +
>> +             ...
>> +
>> +             resets = <&src IMX7_RESET_PCIEPHY>,
>> +                      <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
>> +             reset-names = "pciephy", "apps";
>> +
>> +             ...
>> +        };
>> +
>> +
>> +For list of all valid reset indicies see
>> +<dt-bindings/reset/imx7-reset.h>
>> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
>> index 172dc96..bea1800 100644
>> --- a/drivers/reset/Kconfig
>> +++ b/drivers/reset/Kconfig
>> @@ -27,6 +27,14 @@ config RESET_BERLIN
>>       help
>>         This enables the reset controller driver for Marvell Berlin SoCs.
>>
>> +config RESET_IMX7
>> +     bool "i.MX7 Reset Driver"
>> +     depends on SOC_IMX7D || COMPILE_TEST
>> +     select MFD_SYSCON
>> +     default SOC_IMX7D
>
> Can we make this
>
> config RESET_IMX7
>         bool "i.MX7 Reset Driver" if COMPILE_TEST
>         default SOC_IMX7D
>         select MFD_SYSCON
>
> instead?
>
> If you agree, I can fix it up while applying.

Sure, I have no problem with that change.

Thanks,
Andrey
Philipp Zabel March 1, 2017, 8:53 a.m. UTC | #4 
On Tue, 2017-02-28 at 11:46 -0800, Andrey Smirnov wrote:
> On Tue, Feb 28, 2017 at 6:38 AM, Philipp Zabel <p.zabel@pengutronix.de> wrote:
> > On Tue, 2017-02-21 at 08:13 -0800, Andrey Smirnov wrote:
> >> Add reset controller driver exposing various reset faculties,
> >> implemented by System Reset Controller IP block.
> >>
> >> Cc: Lucas Stach <l.stach@pengutronix.de>
> >> Cc: Rob Herring <robh+dt@kernel.org>
> >> Cc: Mark Rutland <mark.rutland@arm.com>
> >> Cc: devicetree@vger.kernel.org
> >> Cc: linux-kernel@vger.kernel.org
> >> Cc: linux-arm-kernel@lists.infradead.org
> >> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> >> ---
> >>
> >> Changes since v3 (see [v3]):
> >>
> >>       - Convert code IMX7_RESET_PCIEPHY to change G_RST and BTNRST
> >>           simultaneously to make all resets be representable as
> >>           signal->bit in signal->offset register
> >>
> >>       - Convert assert/deassert subroutines to be special cases of a
> >>           common reset subroutine
> >>
> >> Changes since v2 (see [v2]):
> >>
> >>       - Fix typos
> >>
> >>       - Kconfig/Makefile chagnes account for alphabetical sorting of
> >>           those files
> >>
> >>       - Remove redundant includes
> >>
> >>       - Make use of regmap_attach_dev and avoid storing refernce to
> >>           struct *dev in private data
> >>
> >>       - Change code and headers to expose almost all of the reset
> >>           related bits in SRC IP block
> >>
> >> Changes since v1 (see [v1]):
> >>
> >>       - Various small DT bindings description fixes as per feedback
> >>           from Rob Herring
> >>
> >>
> >> [v1] https://lkml.org/lkml/2017/2/6/554
> >> [v2] https://lkml.org/lkml/2017/2/13/488
> >> [v3] https://lkml.org/lkml/2017/2/20/344
> >>
> >>
> >>  .../devicetree/bindings/reset/fsl,imx7-src.txt     |  47 ++++++
> >>  drivers/reset/Kconfig                              |   8 ++
> >>  drivers/reset/Makefile                             |   2 +
> >>  drivers/reset/reset-imx7.c                         | 158 +++++++++++++++++++++
> >>  include/dt-bindings/reset/imx7-reset.h             |  62 ++++++++
> >>  5 files changed, 277 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> >>  create mode 100644 drivers/reset/reset-imx7.c
> >>  create mode 100644 include/dt-bindings/reset/imx7-reset.h
> >>
> >> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> >> new file mode 100644
> >> index 0000000..5e1afc3
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> >> @@ -0,0 +1,47 @@
> >> +Freescale i.MX7 System Reset Controller
> >> +======================================
> >> +
> >> +Please also refer to reset.txt in this directory for common reset
> >> +controller binding usage.
> >> +
> >> +Required properties:
> >> +- compatible: Should be "fsl,imx7-src", "syscon"
> >> +- reg: should be register base and length as documented in the
> >> +  datasheet
> >> +- interrupts: Should contain SRC interrupt
> >> +- #reset-cells: 1, see below
> >> +
> >> +example:
> >> +
> >> +src: reset-controller@30390000 {
> >> +     compatible = "fsl,imx7d-src", "syscon";
> >> +     reg = <0x30390000 0x2000>;
> >> +     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> >> +     #reset-cells = <1>;
> >> +};
> >> +
> >> +
> >> +Specifying reset lines connected to IP modules
> >> +==============================================
> >> +
> >> +The system reset controller can be used to reset various set of
> >> +peripherals. Device nodes that need access to reset lines should
> >> +specify them as a reset phandle in their corresponding node as
> >> +specified in reset.txt.
> >> +
> >> +Example:
> >> +
> >> +     pcie: pcie@33800000 {
> >> +
> >> +             ...
> >> +
> >> +             resets = <&src IMX7_RESET_PCIEPHY>,
> >> +                      <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
> >> +             reset-names = "pciephy", "apps";
> >> +
> >> +             ...
> >> +        };
> >> +
> >> +
> >> +For list of all valid reset indicies see
> >> +<dt-bindings/reset/imx7-reset.h>
> >> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> >> index 172dc96..bea1800 100644
> >> --- a/drivers/reset/Kconfig
> >> +++ b/drivers/reset/Kconfig
> >> @@ -27,6 +27,14 @@ config RESET_BERLIN
> >>       help
> >>         This enables the reset controller driver for Marvell Berlin SoCs.
> >>
> >> +config RESET_IMX7
> >> +     bool "i.MX7 Reset Driver"
> >> +     depends on SOC_IMX7D || COMPILE_TEST
> >> +     select MFD_SYSCON
> >> +     default SOC_IMX7D
> >
> > Can we make this
> >
> > config RESET_IMX7
> >         bool "i.MX7 Reset Driver" if COMPILE_TEST
> >         default SOC_IMX7D
> >         select MFD_SYSCON
> >
> > instead?
> >
> > If you agree, I can fix it up while applying.
> 
> Sure, I have no problem with that change.

Ok, thank you. Applied to reset/next.

regards
Philipp
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
new file mode 100644
index 0000000..5e1afc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -0,0 +1,47 @@ 
+Freescale i.MX7 System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,imx7-src", "syscon"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain SRC interrupt
+- #reset-cells: 1, see below
+
+example:
+
+src: reset-controller@30390000 {
+     compatible = "fsl,imx7d-src", "syscon";
+     reg = <0x30390000 0x2000>;
+     interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+     #reset-cells = <1>;
+};
+
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset various set of
+peripherals. Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+Example:
+
+	pcie: pcie@33800000 {
+
+		...
+
+		resets = <&src IMX7_RESET_PCIEPHY>,
+			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
+		reset-names = "pciephy", "apps";
+
+		...
+        };
+
+
+For list of all valid reset indicies see
+<dt-bindings/reset/imx7-reset.h>
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 172dc96..bea1800 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -27,6 +27,14 @@  config RESET_BERLIN
 	help
 	  This enables the reset controller driver for Marvell Berlin SoCs.
 
+config RESET_IMX7
+	bool "i.MX7 Reset Driver"
+	depends on SOC_IMX7D || COMPILE_TEST
+	select MFD_SYSCON
+	default SOC_IMX7D
+	help
+	  This enables the reset controller driver for i.MX7 SoCs.
+
 config RESET_LPC18XX
 	bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
 	default ARCH_LPC18XX
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 13b346e..a24aa80 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -4,6 +4,7 @@  obj-$(CONFIG_ARCH_STI) += sti/
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
 obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
@@ -14,3 +15,4 @@  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
+
diff --git a/drivers/reset/reset-imx7.c b/drivers/reset/reset-imx7.c
new file mode 100644
index 0000000..5ce145c
--- /dev/null
+++ b/drivers/reset/reset-imx7.c
@@ -0,0 +1,158 @@ 
+/*
+ * Copyright (c) 2017, Impinj, Inc.
+ *
+ * i.MX7 System Reset Controller (SRC) driver
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <dt-bindings/reset/imx7-reset.h>
+
+struct imx7_src {
+	struct reset_controller_dev rcdev;
+	struct regmap *regmap;
+};
+
+enum imx7_src_registers {
+	SRC_A7RCR0		= 0x0004,
+	SRC_M4RCR		= 0x000c,
+	SRC_ERCR		= 0x0014,
+	SRC_HSICPHY_RCR		= 0x001c,
+	SRC_USBOPHY1_RCR	= 0x0020,
+	SRC_USBOPHY2_RCR	= 0x0024,
+	SRC_MIPIPHY_RCR		= 0x0028,
+	SRC_PCIEPHY_RCR		= 0x002c,
+	SRC_DDRC_RCR		= 0x1000,
+};
+
+struct imx7_src_signal {
+	unsigned int offset, bit;
+};
+
+static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
+	[IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
+	[IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
+	[IMX7_RESET_A7_CORE_RESET0]     = { SRC_A7RCR0, BIT(4) },
+	[IMX7_RESET_A7_CORE_RESET1]	= { SRC_A7RCR0, BIT(5) },
+	[IMX7_RESET_A7_DBG_RESET0]	= { SRC_A7RCR0, BIT(8) },
+	[IMX7_RESET_A7_DBG_RESET1]	= { SRC_A7RCR0, BIT(9) },
+	[IMX7_RESET_A7_ETM_RESET0]	= { SRC_A7RCR0, BIT(12) },
+	[IMX7_RESET_A7_ETM_RESET1]	= { SRC_A7RCR0, BIT(13) },
+	[IMX7_RESET_A7_SOC_DBG_RESET]	= { SRC_A7RCR0, BIT(20) },
+	[IMX7_RESET_A7_L2RESET]		= { SRC_A7RCR0, BIT(21) },
+	[IMX7_RESET_SW_M4C_RST]		= { SRC_M4RCR, BIT(1) },
+	[IMX7_RESET_SW_M4P_RST]		= { SRC_M4RCR, BIT(2) },
+	[IMX7_RESET_EIM_RST]		= { SRC_ERCR, BIT(0) },
+	[IMX7_RESET_HSICPHY_PORT_RST]	= { SRC_HSICPHY_RCR, BIT(1) },
+	[IMX7_RESET_USBPHY1_POR]	= { SRC_USBOPHY1_RCR, BIT(0) },
+	[IMX7_RESET_USBPHY1_PORT_RST]	= { SRC_USBOPHY1_RCR, BIT(1) },
+	[IMX7_RESET_USBPHY2_POR]	= { SRC_USBOPHY2_RCR, BIT(0) },
+	[IMX7_RESET_USBPHY2_PORT_RST]	= { SRC_USBOPHY2_RCR, BIT(1) },
+	[IMX7_RESET_MIPI_PHY_MRST]	= { SRC_MIPIPHY_RCR, BIT(1) },
+	[IMX7_RESET_MIPI_PHY_SRST]	= { SRC_MIPIPHY_RCR, BIT(2) },
+	[IMX7_RESET_PCIEPHY]		= { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
+	[IMX7_RESET_PCIEPHY_PERST]	= { SRC_PCIEPHY_RCR, BIT(3) },
+	[IMX7_RESET_PCIE_CTRL_APPS_EN]	= { SRC_PCIEPHY_RCR, BIT(6) },
+	[IMX7_RESET_DDRC_PRST]		= { SRC_DDRC_RCR, BIT(0) },
+	[IMX7_RESET_DDRC_CORE_RST]	= { SRC_DDRC_RCR, BIT(1) },
+};
+
+static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct imx7_src, rcdev);
+}
+
+static int imx7_reset_set(struct reset_controller_dev *rcdev,
+			  unsigned long id, bool assert)
+{
+	struct imx7_src *imx7src = to_imx7_src(rcdev);
+	const struct imx7_src_signal *signal = &imx7_src_signals[id];
+	unsigned int value = 0;
+
+	switch (id) {
+	case IMX7_RESET_PCIEPHY:
+		/*
+		 * wait for more than 10us to release phy g_rst and
+		 * btnrst
+		 */
+		if (!assert)
+			udelay(10);
+		break;
+
+	case IMX7_RESET_PCIE_CTRL_APPS_EN:
+		value = (assert) ? 0 : signal->bit;
+		break;
+	};
+
+	return regmap_update_bits(imx7src->regmap,
+				  signal->offset, signal->bit, value);
+}
+
+static int imx7_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	return imx7_reset_set(rcdev, id, true);
+}
+
+static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return imx7_reset_set(rcdev, id, false);
+}
+
+static const struct reset_control_ops imx7_reset_ops = {
+	.assert		= imx7_reset_assert,
+	.deassert	= imx7_reset_deassert,
+};
+
+static int imx7_reset_probe(struct platform_device *pdev)
+{
+	struct imx7_src *imx7src;
+	struct device *dev = &pdev->dev;
+	struct regmap_config config = { .name = "src" };
+
+	imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
+	if (!imx7src)
+		return -ENOMEM;
+
+	imx7src->regmap = syscon_node_to_regmap(dev->of_node);
+	if (IS_ERR(imx7src->regmap)) {
+		dev_err(dev, "Unable to get imx7-src regmap");
+		return PTR_ERR(imx7src->regmap);
+	}
+	regmap_attach_dev(dev, imx7src->regmap, &config);
+
+	imx7src->rcdev.owner     = THIS_MODULE;
+	imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
+	imx7src->rcdev.ops       = &imx7_reset_ops;
+	imx7src->rcdev.of_node   = dev->of_node;
+
+	return devm_reset_controller_register(dev, &imx7src->rcdev);
+}
+
+static const struct of_device_id imx7_reset_dt_ids[] = {
+	{ .compatible = "fsl,imx7d-src", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver imx7_reset_driver = {
+	.probe	= imx7_reset_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= imx7_reset_dt_ids,
+	},
+};
+builtin_platform_driver(imx7_reset_driver);
diff --git a/include/dt-bindings/reset/imx7-reset.h b/include/dt-bindings/reset/imx7-reset.h
new file mode 100644
index 0000000..6394817
--- /dev/null
+++ b/include/dt-bindings/reset/imx7-reset.h
@@ -0,0 +1,62 @@ 
+/*
+ * Copyright (C) 2017 Impinj, Inc.
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_BINDING_RESET_IMX7_H
+#define DT_BINDING_RESET_IMX7_H
+
+#define IMX7_RESET_A7_CORE_POR_RESET0	0
+#define IMX7_RESET_A7_CORE_POR_RESET1	1
+#define IMX7_RESET_A7_CORE_RESET0	2
+#define IMX7_RESET_A7_CORE_RESET1	3
+#define IMX7_RESET_A7_DBG_RESET0	4
+#define IMX7_RESET_A7_DBG_RESET1	5
+#define IMX7_RESET_A7_ETM_RESET0	6
+#define IMX7_RESET_A7_ETM_RESET1	7
+#define IMX7_RESET_A7_SOC_DBG_RESET	8
+#define IMX7_RESET_A7_L2RESET		9
+#define IMX7_RESET_SW_M4C_RST		10
+#define IMX7_RESET_SW_M4P_RST		11
+#define IMX7_RESET_EIM_RST		12
+#define IMX7_RESET_HSICPHY_PORT_RST	13
+#define IMX7_RESET_USBPHY1_POR		14
+#define IMX7_RESET_USBPHY1_PORT_RST	15
+#define IMX7_RESET_USBPHY2_POR		16
+#define IMX7_RESET_USBPHY2_PORT_RST	17
+#define IMX7_RESET_MIPI_PHY_MRST	18
+#define IMX7_RESET_MIPI_PHY_SRST	19
+
+/*
+ * IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
+ * and PCIEPHY_G_RST
+ */
+#define IMX7_RESET_PCIEPHY		20
+#define IMX7_RESET_PCIEPHY_PERST	21
+
+/*
+ * IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
+ * can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
+ * of as one
+ */
+#define IMX7_RESET_PCIE_CTRL_APPS_EN	22
+#define IMX7_RESET_DDRC_PRST		23
+#define IMX7_RESET_DDRC_CORE_RST	24
+
+#define IMX7_RESET_NUM			25
+
+#endif
+