diff mbox

ARM: dts: augment Moxa ART GPIO node

Message ID 20170322111209.14571-1-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij March 22, 2017, 11:12 a.m. UTC 
The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
to indicate both compatible values for the SoC and the IP part.
Also increase the register range to 0x100, it has at least 0x48
bytes of registers, and a few extra will not hurt.

Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ARM SoC folks: please just apply this to DT for-next like the
other Moxa Faraday cleanup patch.
---
 arch/arm/boot/dts/moxart.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Arnd Bergmann March 31, 2017, 10 a.m. UTC | #1 
On Wed, Mar 22, 2017 at 12:12 PM, Linus Walleij
<linus.walleij@linaro.org> wrote:
> The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
> to indicate both compatible values for the SoC and the IP part.
> Also increase the register range to 0x100, it has at least 0x48
> bytes of registers, and a few extra will not hurt.
>
> Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ARM SoC folks: please just apply this to DT for-next like the
> other Moxa Faraday cleanup patch.

Applied on next/dt, thanks!
diff mbox

Patch

diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index 64f2f44235d0..e86f8c905ac5 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -67,8 +67,8 @@ 
 		gpio: gpio@98700000 {
 			gpio-controller;
 			#gpio-cells = <2>;
-			compatible = "moxa,moxart-gpio";
-			reg = <0x98700000 0xC>;
+			compatible = "moxa,moxart-gpio", "faraday,ftgpio010";
+			reg = <0x98700000 0x100>;
 		};
 
 		rtc: rtc {