@@ -72,6 +72,32 @@
};
};
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&ths>;
+ };
+
+ soc {
+ ths: ths@01c25000 {
+ compatible = "allwinner,sun8i-h3-ths";
+ reg = <0x01c25000 0x100>;
+ clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+ clock-names = "bus", "ths";
+ resets = <&ccu RST_BUS_THS>;
+ #thermal-sensor-cells = <0>;
+ #io-channel-cells = <0>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&ths>;
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
As we have gained the support for the thermal sensor in H3, we can now add its device nodes to the device tree. Add them to the H3 device tree. The H5 thermal sensor has some differences, and will be added furtherly. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- arch/arm/boot/dts/sun8i-h3.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)