| Message ID | 20170407183441.58750-4-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, 08 Apr 2017, Icenowy Zheng wrote: > AXP803 is a PMIC produced by Shenzhen X-Powers, with either I2C or RSB > bus. > > Add a compatible for it. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > Acked-by: Chen-Yu Tsai <wens@csie.org> > --- > Changes in v2: > - Place AXP803 before AXP806/809. > - Added Chen-Yu's ACK. > > Documentation/devicetree/bindings/mfd/axp20x.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt > index b41d2601c6ba..334fb19ce605 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -6,12 +6,13 @@ axp202 (X-Powers) > axp209 (X-Powers) > axp221 (X-Powers) > axp223 (X-Powers) > +axp803 (X-Powers) > axp809 (X-Powers) > > Required properties: > - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", > - "x-powers,axp809" > + "x-powers,axp221", "x-powers,axp223", "x-powers,axp803", > + "x-powers,axp806", "x-powers,axp809" > - reg: The I2C slave address or RSB hardware address for the AXP chip > - interrupt-parent: The parent interrupt controller > - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
On Tue, 11 Apr 2017, Lee Jones wrote: > On Sat, 08 Apr 2017, Icenowy Zheng wrote: > >> AXP803 is a PMIC produced by Shenzhen X-Powers, with either I2C or RSB >> bus. >> >> Add a compatible for it. >> >> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >> Acked-by: Chen-Yu Tsai <wens@csie.org> >> --- >> Changes in v2: >> - Place AXP803 before AXP806/809. >> - Added Chen-Yu's ACK. >> >> Documentation/devicetree/bindings/mfd/axp20x.txt | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) > > For my own reference: > Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Excuse me... Who will apply this patch? I think this patch should be applied by you as it's in bindings/mfd directory, however, if I'm wrong, please point out ;-) > >> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt >> index b41d2601c6ba..334fb19ce605 100644 >> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt >> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt >> @@ -6,12 +6,13 @@ axp202 (X-Powers) >> axp209 (X-Powers) >> axp221 (X-Powers) >> axp223 (X-Powers) >> +axp803 (X-Powers) >> axp809 (X-Powers) >> >> Required properties: >> - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", >> - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", >> - "x-powers,axp809" >> + "x-powers,axp221", "x-powers,axp223", "x-powers,axp803", >> + "x-powers,axp806", "x-powers,axp809" >> - reg: The I2C slave address or RSB hardware address for the AXP chip >> - interrupt-parent: The parent interrupt controller >> - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi, On Tue, Apr 11, 2017 at 11:00 PM, Icenowy Zheng <icenowy@aosc.io> wrote: > > > On Tue, 11 Apr 2017, Lee Jones wrote: > >> On Sat, 08 Apr 2017, Icenowy Zheng wrote: >> >>> AXP803 is a PMIC produced by Shenzhen X-Powers, with either I2C or RSB >>> bus. >>> >>> Add a compatible for it. >>> >>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> >>> Acked-by: Chen-Yu Tsai <wens@csie.org> >>> --- >>> Changes in v2: >>> - Place AXP803 before AXP806/809. >>> - Added Chen-Yu's ACK. >>> >>> Documentation/devicetree/bindings/mfd/axp20x.txt | 5 +++-- >>> 1 file changed, 3 insertions(+), 2 deletions(-) >> >> >> For my own reference: >> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> > > > Excuse me... Who will apply this patch? > > I think this patch should be applied by you as it's in bindings/mfd > directory, however, if I'm wrong, please point out ;-) We need the DT maintainers to ack it first. :) ChenYu
On Tue, 11 Apr 2017, Chen-Yu Tsai wrote: > Hi, > > On Tue, Apr 11, 2017 at 11:00 PM, Icenowy Zheng <icenowy@aosc.io> wrote: > > > > > > On Tue, 11 Apr 2017, Lee Jones wrote: > > > >> On Sat, 08 Apr 2017, Icenowy Zheng wrote: > >> > >>> AXP803 is a PMIC produced by Shenzhen X-Powers, with either I2C or RSB > >>> bus. > >>> > >>> Add a compatible for it. > >>> > >>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > >>> Acked-by: Chen-Yu Tsai <wens@csie.org> > >>> --- > >>> Changes in v2: > >>> - Place AXP803 before AXP806/809. > >>> - Added Chen-Yu's ACK. > >>> > >>> Documentation/devicetree/bindings/mfd/axp20x.txt | 5 +++-- > >>> 1 file changed, 3 insertions(+), 2 deletions(-) > >> > >> > >> For my own reference: > >> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> > > > > > > Excuse me... Who will apply this patch? Excuse you? Are you trying to be polite, or rude? I'm guessing due to the lagging '...', that it's the latter? > > I think this patch should be applied by you as it's in bindings/mfd > > directory, however, if I'm wrong, please point out ;-) > > We need the DT maintainers to ack it first. :) We don't really need the DT Maintainers to get involved here. What I do need is either clear direction as to how this patch-set should be applied, or an indication of which patches are dependant on others and which are orthogonal and can be applied independently.
On Sat, Apr 08, 2017 at 02:34:33AM +0800, Icenowy Zheng wrote: > AXP803 is a PMIC produced by Shenzhen X-Powers, with either I2C or RSB > bus. > > Add a compatible for it. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> > Acked-by: Chen-Yu Tsai <wens@csie.org> > --- > Changes in v2: > - Place AXP803 before AXP806/809. > - Added Chen-Yu's ACK. > > Documentation/devicetree/bindings/mfd/axp20x.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt > index b41d2601c6ba..334fb19ce605 100644 > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > @@ -6,12 +6,13 @@ axp202 (X-Powers) > axp209 (X-Powers) > axp221 (X-Powers) > axp223 (X-Powers) > +axp803 (X-Powers) > axp809 (X-Powers) > > Required properties: > - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", > - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", > - "x-powers,axp809" > + "x-powers,axp221", "x-powers,axp223", "x-powers,axp803", > + "x-powers,axp806", "x-powers,axp809" If you spin another version, please make this one valid combination per line. Otherwise, Acked-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index b41d2601c6ba..334fb19ce605 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -6,12 +6,13 @@ axp202 (X-Powers) axp209 (X-Powers) axp221 (X-Powers) axp223 (X-Powers) +axp803 (X-Powers) axp809 (X-Powers) Required properties: - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", - "x-powers,axp221", "x-powers,axp223", "x-powers,axp806", - "x-powers,axp809" + "x-powers,axp221", "x-powers,axp223", "x-powers,axp803", + "x-powers,axp806", "x-powers,axp809" - reg: The I2C slave address or RSB hardware address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin