diff mbox

ARM: dts: BCM5301X: Add CPU thermal sensor and zone

Message ID 20170414214228.32521-1-zajec5@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Rafał Miłecki April 14, 2017, 9:42 p.m. UTC
From: Rafał Miłecki <rafal@milecki.pl>

This uses CPU thermal sensor available on every Northstar chipset to
monitor temperature. We don't have any cooling or throttling so only a
critical trip was added.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Jon Mason April 17, 2017, 2:54 p.m. UTC | #1
On Fri, Apr 14, 2017 at 5:42 PM, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> This uses CPU thermal sensor available on every Northstar chipset to
> monitor temperature. We don't have any cooling or throttling so only a
> critical trip was added.

Haha!  You beat me to it (as I had a similar patch queued).

This looks good to me.

Acked-by: Jon Mason <jon.mason@broadcom.com>

>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
>  arch/arm/boot/dts/bcm5301x.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index 6a2afe7880ae..bbf39deb89f3 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -356,6 +356,12 @@
>                                      "sata2";
>         };
>
> +       thermal: thermal@1800c2c0 {
> +               compatible = "brcm,ns-thermal";
> +               reg = <0x1800c2c0 0x10>;
> +               #thermal-sensor-cells = <0>;
> +       };
> +
>         srab: srab@18007000 {
>                 compatible = "brcm,bcm5301x-srab";
>                 reg = <0x18007000 0x1000>;
> @@ -419,4 +425,24 @@
>                         status = "disabled";
>                 };
>         };
> +
> +       thermal-zones {
> +               cpu_thermal: cpu-thermal {
> +                       polling-delay-passive = <0>;
> +                       polling-delay = <1000>;
> +                       coefficients = <(-556) 418000>;
> +                       thermal-sensors = <&thermal>;
> +
> +                       trips {
> +                               cpu-crit {
> +                                       temperature     = <125000>;
> +                                       hysteresis      = <0>;
> +                                       type            = "critical";
> +                               };
> +                       };
> +
> +                       cooling-maps {
> +                       };
> +               };
> +       };
>  };
> --
> 2.11.0
>
Rafał Miłecki April 17, 2017, 4:14 p.m. UTC | #2
On 17 April 2017 at 16:54, Jon Mason <jon.mason@broadcom.com> wrote:
> On Fri, Apr 14, 2017 at 5:42 PM, Rafał Miłecki <zajec5@gmail.com> wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> This uses CPU thermal sensor available on every Northstar chipset to
>> monitor temperature. We don't have any cooling or throttling so only a
>> critical trip was added.
>
> Haha!  You beat me to it (as I had a similar patch queued).
>
> This looks good to me.
>
> Acked-by: Jon Mason <jon.mason@broadcom.com>

:) Thanks

I'd appreciate adding thermal to NSP DT. I don't have any NSP unit to
try it on my own.
Jon Mason April 17, 2017, 7:39 p.m. UTC | #3
On Mon, Apr 17, 2017 at 12:14 PM, Rafał Miłecki <zajec5@gmail.com> wrote:
> On 17 April 2017 at 16:54, Jon Mason <jon.mason@broadcom.com> wrote:
>> On Fri, Apr 14, 2017 at 5:42 PM, Rafał Miłecki <zajec5@gmail.com> wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> This uses CPU thermal sensor available on every Northstar chipset to
>>> monitor temperature. We don't have any cooling or throttling so only a
>>> critical trip was added.
>>
>> Haha!  You beat me to it (as I had a similar patch queued).
>>
>> This looks good to me.
>>
>> Acked-by: Jon Mason <jon.mason@broadcom.com>
>
> :) Thanks
>
> I'd appreciate adding thermal to NSP DT. I don't have any NSP unit to
> try it on my own.

I'm doing so right now.  I have it working, I just need to clean up the patches.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 6a2afe7880ae..bbf39deb89f3 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -356,6 +356,12 @@ 
 				     "sata2";
 	};
 
+	thermal: thermal@1800c2c0 {
+		compatible = "brcm,ns-thermal";
+		reg = <0x1800c2c0 0x10>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	srab: srab@18007000 {
 		compatible = "brcm,bcm5301x-srab";
 		reg = <0x18007000 0x1000>;
@@ -419,4 +425,24 @@ 
 			status = "disabled";
 		};
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <125000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
 };