diff mbox

[v4,01/11] dt-bindings: add binding for the Allwinner DE2 CCU

Message ID 20170416120849.54542-2-icenowy@aosc.io (mailing list archive)
State New, archived
Headers show

Commit Message

Icenowy Zheng April 16, 2017, 12:08 p.m. UTC 
Allwinner "Display Engine 2.0" contains some clock controls in it.

In order to add them as clock drivers, we need a device tree binding.
Add the binding here.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v4:
- Dropped the leading 0 in clock@1000000 .
Changes in v3:
- Fill the address space length of DE2 CCU to 0x100000, just reach the start of mixer0.

 .../devicetree/bindings/clock/sun8i-de2.txt        | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/sun8i-de2.txt

Comments

Rob Herring (Arm) April 20, 2017, 1:58 p.m. UTC | #1 
On Sun, Apr 16, 2017 at 08:08:39PM +0800, Icenowy Zheng wrote:
> Allwinner "Display Engine 2.0" contains some clock controls in it.
> 
> In order to add them as clock drivers, we need a device tree binding.
> Add the binding here.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> Changes in v4:
> - Dropped the leading 0 in clock@1000000 .
> Changes in v3:
> - Fill the address space length of DE2 CCU to 0x100000, just reach the start of mixer0.
> 
>  .../devicetree/bindings/clock/sun8i-de2.txt        | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/sun8i-de2.txt

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
new file mode 100644
index 000000000000..15a60bd7dcf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt
@@ -0,0 +1,31 @@ 
+Allwinner Display Engine 2.0 Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+		- "allwinner,sun8i-a83t-de2-clk"
+		- "allwinner,sun50i-a64-de2-clk"
+		- "allwinner,sun50i-h5-de2-clk"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+	  Three are needed:
+  - "mod": the display engine module clock
+  - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de2_clocks: clock@1000000 {
+	compatible = "allwinner,sun50i-a64-de2-clk";
+	reg = <0x01000000 0x100000>;
+	clocks = <&ccu CLK_DE>,
+		 <&ccu CLK_BUS_DE>;
+	clock-names = "mod",
+		      "bus";
+	resets = <&ccu RST_BUS_DE>;
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+};