diff mbox

[v3,12/12] arm64: allwinner: a64: enable Wi-Fi for Pine64

Message ID 20170417115747.7300-13-icenowy@aosc.io (mailing list archive)
State New, archived
Headers show

Commit Message

Icenowy Zheng April 17, 2017, 11:57 a.m. UTC 
The Wi-Fi module of Pine64 is powered via DLDO4 and ELDO1 (the latter
one provides I/O voltage).

Add device node for it.

Although the Wi-Fi module is an external module which should be inserted
to a header, according to my personal talk with TL Lim, he does not want
this header to be used as GPIO (so it's with 2.0mm pitch, not 2.54mm as
other GPIO headers).

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v3:
- Added explaination on 2.0mm pitch.

 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 7da074f95065..9d90bb32aa87 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -64,6 +64,11 @@ 
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
 };
 
 &ehci1 {
@@ -91,6 +96,17 @@ 
 	status = "okay";
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
 &ohci1 {
 	status = "okay";
 };