diff mbox

ARM: dts: socfpga: Fix the ethernet clock phandle

Message ID 20170504102720.10545-1-marex@denx.de (mailing list archive)
State New, archived
Headers show

Commit Message

Marek Vasut May 4, 2017, 10:27 a.m. UTC 
The ethernet block clock phandle must point to the clock node which
represents the clock which directly supply the ethernet block. This
is emac_x_clk , not emacx_clk , so fix this.

From: Pavel Machek <pavel@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
---
 arch/arm/boot/dts/socfpga.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Dinh Nguyen May 9, 2017, 1:38 p.m. UTC | #1 
On 05/04/2017 05:27 AM, Marek Vasut wrote:
> The ethernet block clock phandle must point to the clock node which
> represents the clock which directly supply the ethernet block. This
> is emac_x_clk , not emacx_clk , so fix this.
> 
> From: Pavel Machek <pavel@denx.de>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---

Thanks for fixing this! Applied...

Dinh
diff mbox

Patch

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index b2674bdb8e6a..7e24dc8e82d4 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -557,7 +557,7 @@ 
 			interrupts = <0 115 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac0_clk>;
+			clocks = <&emac_0_clk>;
 			clock-names = "stmmaceth";
 			resets = <&rst EMAC0_RESET>;
 			reset-names = "stmmaceth";
@@ -575,7 +575,7 @@ 
 			interrupts = <0 120 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-			clocks = <&emac1_clk>;
+			clocks = <&emac_1_clk>;
 			clock-names = "stmmaceth";
 			resets = <&rst EMAC1_RESET>;
 			reset-names = "stmmaceth";