@@ -203,69 +203,39 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
- eeprom@51 {
- compatible = "at,24c01";
- pagesize = <8>;
- reg = <0x51>;
- };
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- eeprom@51 {
- compatible = "at,24c01";
- pagesize = <8>;
- reg = <0x51>;
- };
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- eeprom@51 {
- compatible = "at,24c01";
- pagesize = <8>;
- reg = <0x51>;
- };
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
- eeprom@51 {
- compatible = "at,24c01";
- pagesize = <8>;
- reg = <0x51>;
- };
};
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
- eeprom@51 {
- compatible = "at,24c01";
- pagesize = <8>;
- reg = <0x51>;
- };
};
i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
- eeprom@51 {
- compatible = "at,24c01";
- pagesize = <8>;
- reg = <0x51>;
- };
};
- i2c@6 {
+ i2c@6 { /* Backplane EEPROM */
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
@@ -276,7 +246,7 @@
};
};
- i2c@7 {
+ i2c@7 { /* Power board EEPROM */
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
Remove the EEPROMs attached to the I2C expander ports which lead to the backplane slots from the main VIN|ING DTS file. These EEPROMs are bound using separate DTO files, which lets us handle both two-slot and six-slot configuration of the backplane. Signed-off-by: Marek Vasut <marex@denx.de> --- arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts | 34 ++-------------------- 1 file changed, 2 insertions(+), 32 deletions(-)