| Message ID | 20170511132925.14564-5-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, May 11, 2017 at 03:29:24PM +0200, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > Thanks to work done by Broadcom explaining their USB 3.0 PHY details we > know it's attached to the MDIO bus. Use this knowledge to update the > binding: make it a subnode to the MDIO bus and rework way of specifying > required registers. Please document here that you are breaking compatibility and why you think that is okay. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 27 +++++++++++++++------- > 1 file changed, 19 insertions(+), 8 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt > index 09aeba94538d..32f057260351 100644 > --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt > +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt > @@ -3,9 +3,10 @@ Driver for Broadcom Northstar USB 3.0 PHY > Required properties: > > - compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". > -- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B > - MMI. > -- reg-names: "dmp" and "ccb-mii" > +- reg: address of MDIO bus device > +- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin) > + registers > +- #phy-cells: must be 0 > > Initialization of USB 3.0 PHY depends on Northstar version. There are currently > three known series: Ax, Bx and Cx. > @@ -15,9 +16,19 @@ Known B1: BCM4707 rev 6 > Known C0: BCM47094 rev 0 > > Example: > - usb3-phy { > - compatible = "brcm,ns-ax-usb3-phy"; > - reg = <0x18105000 0x1000>, <0x18003000 0x1000>; > - reg-names = "dmp", "ccb-mii"; > - #phy-cells = <0>; > + mdio: mdio@0 { > + reg = <0x0>; > + #size-cells = <1>; > + #address-cells = <0>; > + > + usb3-phy@10 { > + compatible = "brcm,ns-ax-usb3-phy"; > + reg = <0x10>; > + usb3-dmp-syscon = <&usb3_dmp>; > + #phy-cells = <0>; > + }; > + }; > + > + usb3_dmp: syscon@18105000 { > + reg = <0x18105000 0x1000>; > }; > -- > 2.11.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt index 09aeba94538d..32f057260351 100644 --- a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt +++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt @@ -3,9 +3,10 @@ Driver for Broadcom Northstar USB 3.0 PHY Required properties: - compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy". -- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B - MMI. -- reg-names: "dmp" and "ccb-mii" +- reg: address of MDIO bus device +- usb3-dmp-syscon: phandle to syscon with DMP (Device Management Plugin) + registers +- #phy-cells: must be 0 Initialization of USB 3.0 PHY depends on Northstar version. There are currently three known series: Ax, Bx and Cx. @@ -15,9 +16,19 @@ Known B1: BCM4707 rev 6 Known C0: BCM47094 rev 0 Example: - usb3-phy { - compatible = "brcm,ns-ax-usb3-phy"; - reg = <0x18105000 0x1000>, <0x18003000 0x1000>; - reg-names = "dmp", "ccb-mii"; - #phy-cells = <0>; + mdio: mdio@0 { + reg = <0x0>; + #size-cells = <1>; + #address-cells = <0>; + + usb3-phy@10 { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x10>; + usb3-dmp-syscon = <&usb3_dmp>; + #phy-cells = <0>; + }; + }; + + usb3_dmp: syscon@18105000 { + reg = <0x18105000 0x1000>; };