diff mbox

[07/12] arm64: dts: hi3660: Add uarts nodes

Message ID 20170517083745.24479-8-guodong.xu@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Guodong Xu May 17, 2017, 8:37 a.m. UTC 
From: Chen Feng <puck.chen@hisilicon.com>

Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
Enable uart3 and uart6, disable uart5, in hikey960 board dts.

On HiKey960:
 - UART6 is used as default console, and is wired out through low speed
         expansion connector.
 - UART3 has RTS/CTS hardware handshake, and is wired out through low
         speed expansion connector.
 - UART5 is not used in commercial launched boards. So disable it.
 - UART4 is connected to Bluetooth, WL1837.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Reviewed-by: Zhangfei Gao <zhangfei.gao@hisilicon.com>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 18 +++++--
 arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 60 +++++++++++++++++++++++
 2 files changed, 73 insertions(+), 5 deletions(-)

Comments

Rob Herring May 23, 2017, 12:44 a.m. UTC | #1 
On Wed, May 17, 2017 at 04:37:40PM +0800, Guodong Xu wrote:
> From: Chen Feng <puck.chen@hisilicon.com>
> 
> Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
> Enable uart3 and uart6, disable uart5, in hikey960 board dts.
> 
> On HiKey960:
>  - UART6 is used as default console, and is wired out through low speed
>          expansion connector.
>  - UART3 has RTS/CTS hardware handshake, and is wired out through low
>          speed expansion connector.
>  - UART5 is not used in commercial launched boards. So disable it.
>  - UART4 is connected to Bluetooth, WL1837.
> 
> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
> Reviewed-by: Zhangfei Gao <zhangfei.gao@hisilicon.com>
> ---
>  arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 18 +++++--
>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 60 +++++++++++++++++++++++
>  2 files changed, 73 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> index f685b1e..513c496 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
> @@ -15,12 +15,16 @@
>  	compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
>  
>  	aliases {
> -		serial5 = &uart5;       /* console UART */
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		serial2 = &uart2;
> +		serial3 = &uart3;
> +		serial4 = &uart4;
> +		serial5 = &uart5;
> +		serial6 = &uart6;
>  	};
>  
> -	chosen {
> -		stdout-path = "serial5:115200n8";

Why is this removed?

> -	};
> +	chosen {};
>  
>  	memory@0 {
>  		device_type = "memory";
> @@ -47,6 +51,10 @@
>  	status = "okay";
>  };
>  
> -&uart5 {
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&uart6 {
>  	status = "okay";

labels for LS connector?

>  };
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index 3bea0d2..0951a29 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -242,6 +242,56 @@
>  			status = "disabled";
>  		};
>  
> +		uart0: serial@fdf02000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x0 0xfdf02000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
> +				 <&crg_ctrl HI3660_PCLK>;
> +			clock-names = "uartclk", "apb_pclk";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@fdf00000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x0 0xfdf00000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
> +				 <&crg_ctrl HI3660_CLK_GATE_UART1>;
> +			clock-names = "uartclk", "apb_pclk";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@fdf03000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x0 0xfdf03000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
> +				 <&crg_ctrl HI3660_PCLK>;
> +			clock-names = "uartclk", "apb_pclk";
> +			status = "disabled";
> +		};
> +
> +		uart3: serial@ffd74000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x0 0xffd74000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
> +				 <&crg_ctrl HI3660_PCLK>;
> +			clock-names = "uartclk", "apb_pclk";
> +			status = "disabled";
> +		};
> +
> +		uart4: serial@fdf01000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x0 0xfdf01000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
> +				 <&crg_ctrl HI3660_CLK_GATE_UART4>;
> +			clock-names = "uartclk", "apb_pclk";
> +			status = "disabled";
> +		};
> +
>  		uart5: serial@fdf05000 {
>  			compatible = "arm,pl011", "arm,primecell";
>  			reg = <0x0 0xfdf05000 0x0 0x1000>;
> @@ -252,6 +302,16 @@
>  			status = "disabled";
>  		};
>  
> +		uart6: serial@fff32000 {
> +			compatible = "arm,pl011", "arm,primecell";
> +			reg = <0x0 0xfff32000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&crg_ctrl HI3660_CLK_UART6>,
> +				 <&crg_ctrl HI3660_PCLK>;
> +			clock-names = "uartclk", "apb_pclk";
> +			status = "disabled";
> +		};
> +
>  		gpio0: gpio@e8a0b000 {
>  			compatible = "arm,pl061", "arm,primecell";
>  			reg = <0 0xe8a0b000 0 0x1000>;
> -- 
> 2.10.2
>
Guodong Xu May 23, 2017, 9:23 a.m. UTC | #2 
On Tue, May 23, 2017 at 8:44 AM, Rob Herring <robh@kernel.org> wrote:
> On Wed, May 17, 2017 at 04:37:40PM +0800, Guodong Xu wrote:
>> From: Chen Feng <puck.chen@hisilicon.com>
>>
>> Add nodes uart0 to uart4 and uart6 for hi3660 SoC.
>> Enable uart3 and uart6, disable uart5, in hikey960 board dts.
>>
>> On HiKey960:
>>  - UART6 is used as default console, and is wired out through low speed
>>          expansion connector.
>>  - UART3 has RTS/CTS hardware handshake, and is wired out through low
>>          speed expansion connector.
>>  - UART5 is not used in commercial launched boards. So disable it.
>>  - UART4 is connected to Bluetooth, WL1837.
>>
>> Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
>> Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
>> Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
>> Reviewed-by: Zhangfei Gao <zhangfei.gao@hisilicon.com>
>> ---
>>  arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 18 +++++--
>>  arch/arm64/boot/dts/hisilicon/hi3660.dtsi         | 60 +++++++++++++++++++++++
>>  2 files changed, 73 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>> index f685b1e..513c496 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>> +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
>> @@ -15,12 +15,16 @@
>>       compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
>>
>>       aliases {
>> -             serial5 = &uart5;       /* console UART */
>> +             serial0 = &uart0;
>> +             serial1 = &uart1;
>> +             serial2 = &uart2;
>> +             serial3 = &uart3;
>> +             serial4 = &uart4;
>> +             serial5 = &uart5;
>> +             serial6 = &uart6;
>>       };
>>
>> -     chosen {
>> -             stdout-path = "serial5:115200n8";
>
> Why is this removed?
>

I will add this back, but will change serial5 to 6. Serial6 is now the
default console.

serial5 is obsoleted on commercial boards.


>> -     };
>> +     chosen {};
>>
>>       memory@0 {
>>               device_type = "memory";
>> @@ -47,6 +51,10 @@
>>       status = "okay";
>>  };
>>
>> -&uart5 {
>> +&uart3 {
>> +     status = "okay";
>> +};
>> +
>> +&uart6 {
>>       status = "okay";
>
> labels for LS connector?
>

Yes, I Will add.

-Guodong

>>  };
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
>> index 3bea0d2..0951a29 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
>> @@ -242,6 +242,56 @@
>>                       status = "disabled";
>>               };
>>
>> +             uart0: serial@fdf02000 {
>> +                     compatible = "arm,pl011", "arm,primecell";
>> +                     reg = <0x0 0xfdf02000 0x0 0x1000>;
>> +                     interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
>> +                              <&crg_ctrl HI3660_PCLK>;
>> +                     clock-names = "uartclk", "apb_pclk";
>> +                     status = "disabled";
>> +             };
>> +
>> +             uart1: serial@fdf00000 {
>> +                     compatible = "arm,pl011", "arm,primecell";
>> +                     reg = <0x0 0xfdf00000 0x0 0x1000>;
>> +                     interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
>> +                              <&crg_ctrl HI3660_CLK_GATE_UART1>;
>> +                     clock-names = "uartclk", "apb_pclk";
>> +                     status = "disabled";
>> +             };
>> +
>> +             uart2: serial@fdf03000 {
>> +                     compatible = "arm,pl011", "arm,primecell";
>> +                     reg = <0x0 0xfdf03000 0x0 0x1000>;
>> +                     interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
>> +                              <&crg_ctrl HI3660_PCLK>;
>> +                     clock-names = "uartclk", "apb_pclk";
>> +                     status = "disabled";
>> +             };
>> +
>> +             uart3: serial@ffd74000 {
>> +                     compatible = "arm,pl011", "arm,primecell";
>> +                     reg = <0x0 0xffd74000 0x0 0x1000>;
>> +                     interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
>> +                              <&crg_ctrl HI3660_PCLK>;
>> +                     clock-names = "uartclk", "apb_pclk";
>> +                     status = "disabled";
>> +             };
>> +
>> +             uart4: serial@fdf01000 {
>> +                     compatible = "arm,pl011", "arm,primecell";
>> +                     reg = <0x0 0xfdf01000 0x0 0x1000>;
>> +                     interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
>> +                              <&crg_ctrl HI3660_CLK_GATE_UART4>;
>> +                     clock-names = "uartclk", "apb_pclk";
>> +                     status = "disabled";
>> +             };
>> +
>>               uart5: serial@fdf05000 {
>>                       compatible = "arm,pl011", "arm,primecell";
>>                       reg = <0x0 0xfdf05000 0x0 0x1000>;
>> @@ -252,6 +302,16 @@
>>                       status = "disabled";
>>               };
>>
>> +             uart6: serial@fff32000 {
>> +                     compatible = "arm,pl011", "arm,primecell";
>> +                     reg = <0x0 0xfff32000 0x0 0x1000>;
>> +                     interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
>> +                     clocks = <&crg_ctrl HI3660_CLK_UART6>,
>> +                              <&crg_ctrl HI3660_PCLK>;
>> +                     clock-names = "uartclk", "apb_pclk";
>> +                     status = "disabled";
>> +             };
>> +
>>               gpio0: gpio@e8a0b000 {
>>                       compatible = "arm,pl061", "arm,primecell";
>>                       reg = <0 0xe8a0b000 0 0x1000>;
>> --
>> 2.10.2
>>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index f685b1e..513c496 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -15,12 +15,16 @@ 
 	compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
 
 	aliases {
-		serial5 = &uart5;       /* console UART */
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
 	};
 
-	chosen {
-		stdout-path = "serial5:115200n8";
-	};
+	chosen {};
 
 	memory@0 {
 		device_type = "memory";
@@ -47,6 +51,10 @@ 
 	status = "okay";
 };
 
-&uart5 {
+&uart3 {
+	status = "okay";
+};
+
+&uart6 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 3bea0d2..0951a29 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -242,6 +242,56 @@ 
 			status = "disabled";
 		};
 
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART1>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_FACTOR_UART3>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3660_CLK_GATE_UART4>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
 		uart5: serial@fdf05000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xfdf05000 0x0 0x1000>;
@@ -252,6 +302,16 @@ 
 			status = "disabled";
 		};
 
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3660_CLK_UART6>,
+				 <&crg_ctrl HI3660_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
 		gpio0: gpio@e8a0b000 {
 			compatible = "arm,pl061", "arm,primecell";
 			reg = <0 0xe8a0b000 0 0x1000>;