| Message ID | 20170524084341.16698-1-peter.ujfalusi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Peter Ujfalusi <peter.ujfalusi@ti.com> [170524 01:47]:
> Add the needed clock nodes for the CLKOUT2 to be usable by boards.
Tero, care to ack?
Regards,
Tony
On 26/05/17 18:52, Tony Lindgren wrote: > * Peter Ujfalusi <peter.ujfalusi@ti.com> [170524 01:47]: >> Add the needed clock nodes for the CLKOUT2 to be usable by boards. > > Tero, care to ack? I can't test the actual clock itself but the patch looks fine based on TRM, and doesn't seem to cause any issues either so: Acked-by: Tero Kristo <t-kristo@ti.com>
* Tero Kristo <t-kristo@ti.com> [170529 01:31]: > On 26/05/17 18:52, Tony Lindgren wrote: > > * Peter Ujfalusi <peter.ujfalusi@ti.com> [170524 01:47]: > > > Add the needed clock nodes for the CLKOUT2 to be usable by boards. > > > > Tero, care to ack? > > I can't test the actual clock itself but the patch looks fine based on TRM, > and doesn't seem to cause any issues either so: > > Acked-by: Tero Kristo <t-kristo@ti.com> OK thanks applying into omap-for-v4.13/dt. Tony
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index d1d73b725f47..430be5829f8f 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -833,4 +833,40 @@ ti,bit-shift = <23>; reg = <0x4100>; }; + + clkout2_src_mux_ck: clkout2_src_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>, + <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>, + <&dpll_mpu_m2_ck>, <&dpll_extdev_ck>; + reg = <0x4108>; + }; + + clkout2_pre_div_ck: clkout2_pre_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout2_src_mux_ck>; + ti,bit-shift = <4>; + ti,max-div = <8>; + reg = <0x4108>; + }; + + clkout2_post_div_ck: clkout2_post_div_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&clkout2_pre_div_ck>; + ti,bit-shift = <8>; + ti,max-div = <32>; + ti,index-power-of-two; + reg = <0x4108>; + }; + + clkout2_ck: clkout2_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&clkout2_post_div_ck>; + ti,bit-shift = <16>; + reg = <0x4108>; + }; };
Add the needed clock nodes for the CLKOUT2 to be usable by boards. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/boot/dts/am43xx-clocks.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)