@@ -60,38 +60,6 @@ System Timer (ST) required properties:
Its subnodes can be:
- watchdog: compatible should be "atmel,at91rm9200-wdt"
-TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-tcb".
- <chip> can be "at91rm9200" or "at91sam9x5"
-- reg: Should contain registers location and length
-- interrupts: Should contain all interrupts for the TC block
- Note that you can specify several interrupt cells if the TC
- block has one interrupt per channel.
-- clock-names: tuple listing input clock names.
- Required elements: "t0_clk", "slow_clk"
- Optional elements: "t1_clk", "t2_clk"
-- clocks: phandles to input clocks.
-
-Examples:
-
-One interrupt per TC block:
- tcb0: timer@fff7c000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfff7c000 0x100>;
- interrupts = <18 4>;
- clocks = <&tcb0_clk>;
- clock-names = "t0_clk";
- };
-
-One interrupt per TC channel in a TC block:
- tcb1: timer@fffdc000 {
- compatible = "atmel,at91rm9200-tcb";
- reg = <0xfffdc000 0x100>;
- interrupts = <26 4 27 4 28 4>;
- clocks = <&tcb1_clk>;
- clock-names = "t0_clk";
- };
-
RSTC Reset Controller required properties:
- compatible: Should be "atmel,<chip>-rstc".
<chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
new file mode 100644
@@ -0,0 +1,58 @@
+* Device tree bindings for Atmel Timer Counter Blocks
+- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
+ <chip> can be "at91rm9200" or "at91sam9x5"
+- reg: Should contain registers location and length
+- #address-cells: has to be 1
+- #size-cells: has to be 0
+- interrupts: Should contain all interrupts for the TC block
+ Note that you can specify several interrupt cells if the TC
+ block has one interrupt per channel.
+- clock-names: tuple listing input clock names.
+ Required elements: "t0_clk", "slow_clk"
+ Optional elements: "t1_clk", "t2_clk"
+- clocks: phandles to input clocks.
+
+The TCB can expose multiple subdevices:
+ * a timer
+ - compatible: Should be "atmel,tcb-timer"
+ - reg: Should contain the TCB channels to be used. If the
+ counter width is 16 bits (at91rm9200-tcb), two consecutive
+ channels are needed. Else, only one channel will be used.
+
+ * a PWM chip: see ../pwm/atmel-tcb-pwm.txt
+
+Examples:
+
+One interrupt per TC block:
+ tcb0: timer@fff7c000 {
+ compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff7c000 0x100>;
+ interrupts = <18 4>;
+ clocks = <&tcb0_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+
+ timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>, <1>;
+ };
+
+ timer@2 {
+ compatible = "atmel,tcb-timer";
+ reg = <2>;
+ };
+ };
+
+One interrupt per TC channel in a TC block:
+ tcb1: timer@fffdc000 {
+ compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfffdc000 0x100>;
+ interrupts = <26 4>, <27 4>, <28 4>;
+ clocks = <&tcb1_clk>, <&clk32k>;
+ clock-names = "t0_clk", "slow_clk";
+ };
+
+
@@ -2,15 +2,17 @@ Atmel TCB PWM controller
Required properties:
- compatible: should be "atmel,tcb-pwm"
+- reg: tcb channel to use. Each channel can export 2 PWMs
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
-- tc-block: The Timer Counter block to use as a PWM chip.
Example:
-pwm {
- compatible = "atmel,tcb-pwm";
- #pwm-cells = <3>;
- tc-block = <1>;
+tcb0: timer@f800c000 {
+ pwm@0 {
+ compatible = "atmel,tcb-pwm";
+ reg = <0>;
+ #pwm-cells = <3>;
+ };
};
The current binding for the TCB is not flexible enough for some use cases and prevents proper utilization of all the channels. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-pwm@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- .../devicetree/bindings/arm/atmel-at91.txt | 32 ------------ .../devicetree/bindings/mfd/atmel-tcb.txt | 58 ++++++++++++++++++++++ .../devicetree/bindings/pwm/atmel-tcb-pwm.txt | 12 +++-- 3 files changed, 65 insertions(+), 37 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt