diff mbox

[v3,8/9] dt-bindings: orion-mdio: document the new xmdio compatible

Message ID 20170612095745.11300-9-antoine.tenart@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Antoine Tenart June 12, 2017, 9:57 a.m. UTC 
A new compatible for Marvell xMDIO interfaces was added into the Marvell
MDIO driver. Document this new compatible.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 Documentation/devicetree/bindings/net/marvell-orion-mdio.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
index ccdabdcc8618..b93a5b5a0472 100644
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -1,12 +1,12 @@ 
 * Marvell MDIO Ethernet Controller interface
 
 The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370 and Armada XP have an identical unit that provides
-an interface with the MDIO bus. This driver handles this MDIO
-interface.
+MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
+identical unit that provides an interface with the MDIO bus or
+with the xMDIO bus. This driver handles these interfaces.
 
 Required properties:
-- compatible: "marvell,orion-mdio"
+- compatible: "marvell,orion-mdio" or "marvell,xmdio"
 - reg: address and length of the MDIO registers.  When an interrupt is
   not present, the length is the size of the SMI register (4 bytes)
   otherwise it must be 0x84 bytes to cover the interrupt control