[v2,4/5] arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx

Commit Message

Gregory CLEMENT June 13, 2017, 10:44 a.m. UTC

From: Konstantin Porotchkin <[e-mail]>

The Armada 37xx SoCs has 2 SDHCI interfaces. This patch adds the second
one.

Moreover, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces.

The second interface is using pluggable module that can either
have an SD connector or eMMC on it.
This patch adds support for SD module in the device DT.

[ [e-mail]:
 - Add more detail in commit log
 - Sort the dt node in address order
 - Document the SD slot in the dts ]

Signed-off-by: Konstantin Porotchkin <[e-mail]>
Signed-off-by: Gregory CLEMENT <[e-mail]>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts |  9 +++++++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 11 +++++++++++
 2 files changed, 20 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3ee920ac0015..eab3bc7e6382 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -158,6 +158,15 @@ 
 	status = "okay";
 };
 
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index c1076fd0bd9e..6e3d50cf10db 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -292,6 +292,17 @@ 
 				};
 			};
 
+			sdhci1: sdhci@d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+					     "marvell,sdhci-xenon";
+				reg = <0xd0000 0x300
+				       0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
 			sdhci0: sdhci@d8000 {
 				compatible = "marvell,armada-3700-sdhci",
 					     "marvell,sdhci-xenon";