@@ -59,13 +59,6 @@
chosen {
stdout-path = "serial0:115200n8";
};
-
- reg_vcc1v8: vcc1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
};
&ehci0 {
@@ -95,8 +88,8 @@
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc1v8>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_eldo1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
@@ -45,19 +45,10 @@
#include "sun50i-a64.dtsi"
-/ {
- reg_vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-};
-
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
- vmmc-supply = <®_vcc3v3>;
+ vmmc-supply = <®_dcdc1>;
non-removable;
disable-wp;
bus-width = <4>;
The device tree of SoPine SoM and its baseboard used to contain two dummy regulators: vcc3v3 and vcc1v8. As proper AXP803 regulator support is added, drop the dummy regulators, and use the correct ones. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 11 ++--------- arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 11 +---------- 2 files changed, 3 insertions(+), 19 deletions(-)