Message ID | 20170720230717.58255-1-icenowy@aosc.io (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Jul 21, 2017 at 7:07 AM, Icenowy Zheng <icenowy@aosc.io> wrote: > Banana Pi M64 connects the USB host-only controller on A64 SoC to a USB > hub, which provided the two USB Type-A ports on the board. > > Enable the USB host controller. > > The OTG function of the Micro-USB port needs the drivevbus function of > the AXP803 driver implemented, so it's not enabled now. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 0d1f026d831a..829922d077fb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -67,6 +67,10 @@ }; }; +&ehci1 { + status = "okay"; +}; + &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; @@ -122,6 +126,10 @@ status = "okay"; }; +&ohci1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -133,3 +141,7 @@ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; + +&usbphy { + status = "okay"; +};
Banana Pi M64 connects the USB host-only controller on A64 SoC to a USB hub, which provided the two USB Type-A ports on the board. Enable the USB host controller. The OTG function of the Micro-USB port needs the drivevbus function of the AXP803 driver implemented, so it's not enabled now. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)