| Message ID | 20170723141354.42646-5-icenowy@aosc.io (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Jul 23, 2017 at 10:13 PM, Icenowy Zheng <icenowy@aosc.io> wrote: > As we have gained the support for the thermal sensor in H3, we can now > add its device nodes to the device tree. > > Add them to the H3 device tree. > > The H5 thermal sensor has some differences, and will be added furtherly. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Other than the possibility of referencing e-fuses for calibration data, this patch looks good. Reviewed-by: Chen-Yu Tsai <wens@csie.org>
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index a0cee17fe44b..efe3a8e4f2af 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -108,6 +108,23 @@ }; }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&ths>; + }; + + soc { + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_THS>; + #thermal-sensor-cells = <0>; + #io-channel-cells = <0>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
As we have gained the support for the thermal sensor in H3, we can now add its device nodes to the device tree. Add them to the H3 device tree. The H5 thermal sensor has some differences, and will be added furtherly. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- Changes in v3: - Clock name changes. - Splited out thermal zone addition. arch/arm/boot/dts/sun8i-h3.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)