diff mbox

[v4,1/3] PCI: Allow PCI_DEV_FLAGS_NO_BUS_RESET to be used on bus device

Message ID 20170908081033.3025-2-jglauber@cavium.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jan Glauber Sept. 8, 2017, 8:10 a.m. UTC 
From: David Daney <david.daney@cavium.com>

When checking to see if a PCI bus can safely be reset, we check to see
if any of the children have their PCI_DEV_FLAGS_NO_BUS_RESET flag set.
As these devices are known not to behave well after a bus reset.

Some PCIe root port bridges also do not behave well after a bus reset,
sometimes causing the devices behind the bridge to become unusable.

Add a check for the PCI_DEV_FLAGS_NO_BUS_RESET flag being set in the
bridge device to allow these bridges to be flagged, and prevent their
buses from being reset.

A follow on patch will add a quirk for this type of bridge.

Signed-off-by: David Daney <david.daney@cavium.com>
[jglauber@cavium.com: fixed typo]
Signed-off-by: Jan Glauber <jglauber@cavium.com>
---
 drivers/pci/pci.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index fdf65a6c13f6..b2a46ca7f133 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4325,6 +4325,10 @@  static bool pci_bus_resetable(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 
+
+	if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET))
+		return false;
+
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
 		    (dev->subordinate && !pci_bus_resetable(dev->subordinate)))