diff mbox

[v1,07/10] iio:adc:at91-sama5d2: Support backup mode

Message ID 20170908153604.28383-8-romain.izard.pro@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Romain Izard Sept. 8, 2017, 3:36 p.m. UTC
Support the backup mode for platform suspend, by restoring the hardware
registers on resume.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 71 ++++++++++++++++++++++++++++++++------
 1 file changed, 61 insertions(+), 10 deletions(-)

Comments

Nicolas Ferre Sept. 8, 2017, 4:03 p.m. UTC | #1
On 08/09/2017 at 17:36, Romain Izard wrote:
> Support the backup mode for platform suspend, by restoring the hardware
> registers on resume.
> 
> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>

Romain,

Thanks for your series: definitively some of your patches need to be
integrated (I've merged some of them in our current linux-4.9-at91 branch.
However, It seems that some of your additions have already been
submitted and/or accepted by maintainers.
For instance an equivalent of this one seems already in Linus' tree:
500a2eefd6b16ba141a8fb777ea6962d2eb65e3b ("iio: adc: at91-sama5d2_adc:
add support for suspend/resume functionality").

Please tell us if it fits what your observed on this driver (or others).

Regards,

> ---
>  drivers/iio/adc/at91-sama5d2_adc.c | 71 ++++++++++++++++++++++++++++++++------
>  1 file changed, 61 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> index e10dca3ed74b..f9718c863363 100644
> --- a/drivers/iio/adc/at91-sama5d2_adc.c
> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> @@ -200,6 +200,7 @@ struct at91_adc_state {
>  	u32				conversion_value;
>  	struct at91_adc_soc_info	soc_info;
>  	wait_queue_head_t		wq_data_available;
> +	unsigned int			current_rate;
>  	/*
>  	 * lock to prevent concurrent 'single conversion' requests through
>  	 * sysfs.
> @@ -269,6 +270,8 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
>  	mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
>  	at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
>  
> +	st->current_rate = freq;
> +
>  	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
>  		freq, startup, prescal);
>  }
> @@ -375,7 +378,9 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
>  	    val > st->soc_info.max_sample_rate)
>  		return -EINVAL;
>  
> +	mutex_lock(&st->lock);
>  	at91_adc_setup_samp_freq(st, val);
> +	mutex_unlock(&st->lock);
>  
>  	return 0;
>  }
> @@ -386,6 +391,21 @@ static const struct iio_info at91_adc_info = {
>  	.driver_module = THIS_MODULE,
>  };
>  
> +static void at91_adc_init_hw(struct at91_adc_state *st, unsigned int freq)
> +{
> +	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
> +	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
> +	/*
> +	 * Transfer field must be set to 2 according to the datasheet and
> +	 * allows different analog settings for each channel.
> +	 */
> +	at91_adc_writel(st, AT91_SAMA5D2_MR,
> +			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
> +
> +	at91_adc_setup_samp_freq(st, freq);
> +
> +}
> +
>  static int at91_adc_probe(struct platform_device *pdev)
>  {
>  	struct iio_dev *indio_dev;
> @@ -482,16 +502,7 @@ static int at91_adc_probe(struct platform_device *pdev)
>  		goto vref_disable;
>  	}
>  
> -	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
> -	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
> -	/*
> -	 * Transfer field must be set to 2 according to the datasheet and
> -	 * allows different analog settings for each channel.
> -	 */
> -	at91_adc_writel(st, AT91_SAMA5D2_MR,
> -			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
> -
> -	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
> +	at91_adc_init_hw(st, st->soc_info.min_sample_rate);
>  
>  	ret = clk_prepare_enable(st->per_clk);
>  	if (ret)
> @@ -541,12 +552,52 @@ static const struct of_device_id at91_adc_dt_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
>  
> +#ifdef CONFIG_PM_SLEEP
> +static int at91_adc_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct at91_adc_state *st = iio_priv(indio_dev);
> +
> +	clk_disable_unprepare(st->per_clk);
> +
> +	regulator_disable(st->vref);
> +	regulator_disable(st->reg);
> +
> +	return 0;
> +}
> +
> +static int at91_adc_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct at91_adc_state *st = iio_priv(indio_dev);
> +	int err;
> +
> +	err = regulator_enable(st->reg);
> +	if (err)
> +		return err;
> +
> +	err = regulator_enable(st->vref);
> +	if (err)
> +		return err;
> +
> +	at91_adc_init_hw(st, st->current_rate);
> +
> +	err = clk_prepare_enable(st->per_clk);
> +	return err;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
> +
>  static struct platform_driver at91_adc_driver = {
>  	.probe = at91_adc_probe,
>  	.remove = at91_adc_remove,
>  	.driver = {
>  		.name = "at91-sama5d2_adc",
>  		.of_match_table = at91_adc_dt_match,
> +		.pm = &at91_adc_pm_ops,
>  	},
>  };
>  module_platform_driver(at91_adc_driver)
>
Romain Izard Sept. 8, 2017, 4:21 p.m. UTC | #2
2017-09-08 18:03 GMT+02:00 Nicolas Ferre <nicolas.ferre@microchip.com>:
> On 08/09/2017 at 17:36, Romain Izard wrote:
>> Support the backup mode for platform suspend, by restoring the hardware
>> registers on resume.
>>
>> Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
>
> Romain,
>
> Thanks for your series: definitively some of your patches need to be
> integrated (I've merged some of them in our current linux-4.9-at91 branch.
> However, It seems that some of your additions have already been
> submitted and/or accepted by maintainers.
> For instance an equivalent of this one seems already in Linus' tree:
> 500a2eefd6b16ba141a8fb777ea6962d2eb65e3b ("iio: adc: at91-sama5d2_adc:
> add support for suspend/resume functionality").
>
> Please tell us if it fits what your observed on this driver (or others).
>
> Regards,
>
>> ---
>>  drivers/iio/adc/at91-sama5d2_adc.c | 71 ++++++++++++++++++++++++++++++++------
>>  1 file changed, 61 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
>> index e10dca3ed74b..f9718c863363 100644
>> --- a/drivers/iio/adc/at91-sama5d2_adc.c
>> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
>> @@ -200,6 +200,7 @@ struct at91_adc_state {
>>       u32                             conversion_value;
>>       struct at91_adc_soc_info        soc_info;
>>       wait_queue_head_t               wq_data_available;
>> +     unsigned int                    current_rate;
>>       /*
>>        * lock to prevent concurrent 'single conversion' requests through
>>        * sysfs.
>> @@ -269,6 +270,8 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
>>       mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
>>       at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
>>
>> +     st->current_rate = freq;
>> +
>>       dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
>>               freq, startup, prescal);
>>  }
>> @@ -375,7 +378,9 @@ static int at91_adc_write_raw(struct iio_dev *indio_dev,
>>           val > st->soc_info.max_sample_rate)
>>               return -EINVAL;
>>
>> +     mutex_lock(&st->lock);
>>       at91_adc_setup_samp_freq(st, val);
>> +     mutex_unlock(&st->lock);
>>
>>       return 0;
>>  }
>> @@ -386,6 +391,21 @@ static const struct iio_info at91_adc_info = {
>>       .driver_module = THIS_MODULE,
>>  };
>>
>> +static void at91_adc_init_hw(struct at91_adc_state *st, unsigned int freq)
>> +{
>> +     at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
>> +     at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
>> +     /*
>> +      * Transfer field must be set to 2 according to the datasheet and
>> +      * allows different analog settings for each channel.
>> +      */
>> +     at91_adc_writel(st, AT91_SAMA5D2_MR,
>> +                     AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
>> +
>> +     at91_adc_setup_samp_freq(st, freq);
>> +
>> +}
>> +
>>  static int at91_adc_probe(struct platform_device *pdev)
>>  {
>>       struct iio_dev *indio_dev;
>> @@ -482,16 +502,7 @@ static int at91_adc_probe(struct platform_device *pdev)
>>               goto vref_disable;
>>       }
>>
>> -     at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
>> -     at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
>> -     /*
>> -      * Transfer field must be set to 2 according to the datasheet and
>> -      * allows different analog settings for each channel.
>> -      */
>> -     at91_adc_writel(st, AT91_SAMA5D2_MR,
>> -                     AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
>> -
>> -     at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
>> +     at91_adc_init_hw(st, st->soc_info.min_sample_rate);
>>
>>       ret = clk_prepare_enable(st->per_clk);
>>       if (ret)
>> @@ -541,12 +552,52 @@ static const struct of_device_id at91_adc_dt_match[] = {
>>  };
>>  MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
>>
>> +#ifdef CONFIG_PM_SLEEP
>> +static int at91_adc_suspend(struct device *dev)
>> +{
>> +     struct platform_device *pdev = to_platform_device(dev);
>> +     struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> +     struct at91_adc_state *st = iio_priv(indio_dev);
>> +
>> +     clk_disable_unprepare(st->per_clk);
>> +
>> +     regulator_disable(st->vref);
>> +     regulator_disable(st->reg);
>> +
>> +     return 0;
>> +}
>> +
>> +static int at91_adc_resume(struct device *dev)
>> +{
>> +     struct platform_device *pdev = to_platform_device(dev);
>> +     struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> +     struct at91_adc_state *st = iio_priv(indio_dev);
>> +     int err;
>> +
>> +     err = regulator_enable(st->reg);
>> +     if (err)
>> +             return err;
>> +
>> +     err = regulator_enable(st->vref);
>> +     if (err)
>> +             return err;
>> +
>> +     at91_adc_init_hw(st, st->current_rate);
>> +
>> +     err = clk_prepare_enable(st->per_clk);
>> +     return err;
>> +}
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
>> +
>>  static struct platform_driver at91_adc_driver = {
>>       .probe = at91_adc_probe,
>>       .remove = at91_adc_remove,
>>       .driver = {
>>               .name = "at91-sama5d2_adc",
>>               .of_match_table = at91_adc_dt_match,
>> +             .pm = &at91_adc_pm_ops,
>>       },
>>  };
>>  module_platform_driver(at91_adc_driver)
>>

Please ignore this patch. The existing merged patch is better.

Best regards,
diff mbox

Patch

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index e10dca3ed74b..f9718c863363 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -200,6 +200,7 @@  struct at91_adc_state {
 	u32				conversion_value;
 	struct at91_adc_soc_info	soc_info;
 	wait_queue_head_t		wq_data_available;
+	unsigned int			current_rate;
 	/*
 	 * lock to prevent concurrent 'single conversion' requests through
 	 * sysfs.
@@ -269,6 +270,8 @@  static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
 	mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
 	at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
 
+	st->current_rate = freq;
+
 	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
 		freq, startup, prescal);
 }
@@ -375,7 +378,9 @@  static int at91_adc_write_raw(struct iio_dev *indio_dev,
 	    val > st->soc_info.max_sample_rate)
 		return -EINVAL;
 
+	mutex_lock(&st->lock);
 	at91_adc_setup_samp_freq(st, val);
+	mutex_unlock(&st->lock);
 
 	return 0;
 }
@@ -386,6 +391,21 @@  static const struct iio_info at91_adc_info = {
 	.driver_module = THIS_MODULE,
 };
 
+static void at91_adc_init_hw(struct at91_adc_state *st, unsigned int freq)
+{
+	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
+	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
+	/*
+	 * Transfer field must be set to 2 according to the datasheet and
+	 * allows different analog settings for each channel.
+	 */
+	at91_adc_writel(st, AT91_SAMA5D2_MR,
+			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
+
+	at91_adc_setup_samp_freq(st, freq);
+
+}
+
 static int at91_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
@@ -482,16 +502,7 @@  static int at91_adc_probe(struct platform_device *pdev)
 		goto vref_disable;
 	}
 
-	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
-	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
-	/*
-	 * Transfer field must be set to 2 according to the datasheet and
-	 * allows different analog settings for each channel.
-	 */
-	at91_adc_writel(st, AT91_SAMA5D2_MR,
-			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
-
-	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
+	at91_adc_init_hw(st, st->soc_info.min_sample_rate);
 
 	ret = clk_prepare_enable(st->per_clk);
 	if (ret)
@@ -541,12 +552,52 @@  static const struct of_device_id at91_adc_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
 
+#ifdef CONFIG_PM_SLEEP
+static int at91_adc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	clk_disable_unprepare(st->per_clk);
+
+	regulator_disable(st->vref);
+	regulator_disable(st->reg);
+
+	return 0;
+}
+
+static int at91_adc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct at91_adc_state *st = iio_priv(indio_dev);
+	int err;
+
+	err = regulator_enable(st->reg);
+	if (err)
+		return err;
+
+	err = regulator_enable(st->vref);
+	if (err)
+		return err;
+
+	at91_adc_init_hw(st, st->current_rate);
+
+	err = clk_prepare_enable(st->per_clk);
+	return err;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(at91_adc_pm_ops, at91_adc_suspend, at91_adc_resume);
+
 static struct platform_driver at91_adc_driver = {
 	.probe = at91_adc_probe,
 	.remove = at91_adc_remove,
 	.driver = {
 		.name = "at91-sama5d2_adc",
 		.of_match_table = at91_adc_dt_match,
+		.pm = &at91_adc_pm_ops,
 	},
 };
 module_platform_driver(at91_adc_driver)