| Message ID | 20170908171830.13813-4-georgi.djakov@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 8, 2017 at 10:48 PM, Georgi Djakov <georgi.djakov@linaro.org> wrote: > Add driver for the Qualcomm interconnect buses found in msm8916 based > platforms. This patch contains only a partial topology to make reviewing > easier. > > Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> > --- > drivers/interconnect/Kconfig | 5 + > drivers/interconnect/Makefile | 1 + > drivers/interconnect/qcom/Kconfig | 11 + > drivers/interconnect/qcom/Makefile | 1 + > drivers/interconnect/qcom/interconnect_msm8916.c | 375 +++++++++++++++++++++++ > include/linux/interconnect/qcom-msm8916.h | 92 ++++++ > 6 files changed, 485 insertions(+) > create mode 100644 drivers/interconnect/qcom/Kconfig > create mode 100644 drivers/interconnect/qcom/Makefile > create mode 100644 drivers/interconnect/qcom/interconnect_msm8916.c > create mode 100644 include/linux/interconnect/qcom-msm8916.h > > diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig > index 1e50e951cdc1..b123a76e2f9d 100644 > --- a/drivers/interconnect/Kconfig > +++ b/drivers/interconnect/Kconfig > @@ -8,3 +8,8 @@ menuconfig INTERCONNECT > > If unsure, say no. > > +if INTERCONNECT > + > +source "drivers/interconnect/qcom/Kconfig" > + > +endif > diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile > index d9da6a6c3560..62a01de24aeb 100644 > --- a/drivers/interconnect/Makefile > +++ b/drivers/interconnect/Makefile > @@ -1 +1,2 @@ > obj-$(CONFIG_INTERCONNECT) += interconnect.o > +obj-$(CONFIG_INTERCONNECT_QCOM) += qcom/ > diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig > new file mode 100644 > index 000000000000..86465dc37bd4 > --- /dev/null > +++ b/drivers/interconnect/qcom/Kconfig > @@ -0,0 +1,11 @@ > +config INTERCONNECT_QCOM > + bool "Qualcomm Network-on-Chip interconnect drivers" > + depends on INTERCONNECT > + depends on ARCH_QCOM || COMPILE_TEST > + default y > + > +config INTERCONNECT_QCOM_MSM8916 > + tristate "Qualcomm MSM8916 interconnect driver" > + depends on INTERCONNECT_QCOM > + help > + This is a driver for the Qualcomm Network-on-Chip on msm8916-based platforms. > diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile > new file mode 100644 > index 000000000000..0831080e1100 > --- /dev/null > +++ b/drivers/interconnect/qcom/Makefile > @@ -0,0 +1 @@ > +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += interconnect_msm8916.o > diff --git a/drivers/interconnect/qcom/interconnect_msm8916.c b/drivers/interconnect/qcom/interconnect_msm8916.c > new file mode 100644 > index 000000000000..9b001e100974 > --- /dev/null > +++ b/drivers/interconnect/qcom/interconnect_msm8916.c > @@ -0,0 +1,375 @@ > +/* > + * Copyright (C) 2017 Linaro Ltd > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 and > + * only version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/clk.h> > +#include <linux/device.h> > +#include <linux/io.h> > +#include <linux/interconnect-provider.h> > +#include <linux/interconnect/qcom-msm8916.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +#define to_qcom_icp(_icp) \ > + container_of(_icp, struct qcom_interconnect_provider, icp) > +#define to_qcom_node(_node) \ > + container_of(_node, struct qcom_interconnect_node, node) > + > +enum qcom_bus_type { > + QCOM_BUS_TYPE_NOC = 0, > + QCOM_BUS_TYPE_MEM, > +}; > + > +struct qcom_interconnect_provider { > + struct icp icp; > + void __iomem *base; > + struct clk *bus_clk; > + struct clk *bus_a_clk; > + u32 base_offset; > + u32 qos_offset; > + enum qcom_bus_type type; > +}; > + > +struct qcom_interconnect_node { > + struct interconnect_node node; > + unsigned char *name; > + struct interconnect_node *links[8]; Magic number 8. Replace with 8916_MAX_LINKS or something. > + u16 id; > + u16 num_links; > + u16 port; > + u16 buswidth; Comment on what a buswidth is just to be clear > + u64 rate; Comment on units > +}; > + > +static struct qcom_interconnect_node snoc_int_0; > +static struct qcom_interconnect_node snoc_int_1; > +static struct qcom_interconnect_node snoc_int_bimc; > +static struct qcom_interconnect_node snoc_bimc_0_mas; > +static struct qcom_interconnect_node pnoc_snoc_slv; > + > +static struct qcom_interconnect_node snoc_bimc_0_slv; IMO, saving an 'a' and 'e' is not worth it for the sake of readability. Just use 'slave' and 'master' in the names. > +static struct qcom_interconnect_node slv_ebi_ch0; > + > +static struct qcom_interconnect_node pnoc_int_1; > +static struct qcom_interconnect_node mas_pnoc_sdcc_1; > +static struct qcom_interconnect_node mas_pnoc_sdcc_2; > +static struct qcom_interconnect_node pnoc_snoc_mas; > + > +struct qcom_interconnect_desc { > + struct qcom_interconnect_node **nodes; > + size_t num_nodes; > +}; > + > +static struct qcom_interconnect_node snoc_int_0 = { > + .id = 10004, > + .name = "snoc-int-0", > +#if 0 Please get rid if these. > + .links = { &snoc_pnoc_mas.node }, > + .num_links = 1, > +#endif > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node snoc_int_1 = { > + .id = 10005, > + .name = "snoc-int-1", > +#if 0 > + .links = { &slv_apss.node, &slv_cats_0.node, &slv_cats_1.node }, > + .num_links = 3, > +#endif > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node snoc_int_bimc = { > + .id = 10006, > + .name = "snoc-bimc", > + .links = { &snoc_bimc_0_mas.node }, > + .num_links = 1, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node snoc_bimc_0_mas = { > + .id = 10007, > + .name = "snoc-bimc-0-mas", > + .links = { &snoc_bimc_0_slv.node }, > + .num_links = 1, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node pnoc_snoc_slv = { > + .id = 10011, > + .name = "snoc-pnoc", > + .links = { &snoc_int_0.node, &snoc_int_bimc.node, &snoc_int_1.node }, > + .num_links = 3, > + .buswidth = 8, > +}; Suggest replacing this list of definitions with a macro such as: #define DEFINE_XCON_NODE(_name, _id, numlinks, buswidth, ...) \ static struct qcom_interconnect_node _name; \ static struct qcom_interconnect_node _name = { \ .id = _id, \ .name = _name, \ .buswidth = buswidth, \ .num_links = numlinks, \ .links = { __VA_ARGS__ }, \ }; This will reduce these definitions to a series of definitions as follows that improves readability. DEFINE_XCON_NODE(snoc_int_0, 10004, 1, 8, &snoc_pnoc_mas.node) DEFINE_XCON_NODE(snoc_int_1, 10005, 3, 8, &snoc_apss.node, &slv_cats_0.node, &slv_cats_1.node) DEFINE_XCON_NODE(snoc_int_bimc, 10006, 1, 8, &snoc_bimc_0_mas.node) If fact you could take it one step further and move the definitions under the provider definition below directly. > +static struct qcom_interconnect_node *msm8916_snoc_nodes[] = { > + [SNOC_INT_0] = &snoc_int_0, > + [SNOC_INT_1] = &snoc_int_1, > + [SNOC_INT_BIMC] = &snoc_int_bimc, > + [SNOC_BIMC_0_MAS] = &snoc_bimc_0_mas, > + [PNOC_SNOC_SLV] = &pnoc_snoc_slv, > +}; > + > +static struct qcom_interconnect_desc msm8916_snoc = { > + .nodes = msm8916_snoc_nodes, > + .num_nodes = ARRAY_SIZE(msm8916_snoc_nodes), > +}; > + > +static struct qcom_interconnect_node snoc_bimc_0_slv = { > + .id = 10025, > + .name = "snoc_bimc_0_slv", > + .links = { &slv_ebi_ch0.node }, > + .num_links = 1, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node slv_ebi_ch0 = { > + .id = 512, > + .name = "slv-ebi-ch0", > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node *msm8916_bimc_nodes[] = { > + [SNOC_BIMC_0_SLV] = &snoc_bimc_0_slv, > + [SLV_EBI_CH0] = &slv_ebi_ch0, > +}; > + > +static struct qcom_interconnect_desc msm8916_bimc = { > + .nodes = msm8916_bimc_nodes, > + .num_nodes = ARRAY_SIZE(msm8916_bimc_nodes), > +}; > + > +static struct qcom_interconnect_node pnoc_int_1 = { > + .id = 10013, > + .name = "pnoc-int-1", > + .links = { &pnoc_snoc_mas.node }, > + .num_links = 1, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node mas_pnoc_sdcc_1 = { > + .id = 78, > + .name = "mas-pnoc-sdcc-1", > + .links = { &pnoc_int_1.node }, > + .num_links = 1, > + .port = 7, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node mas_pnoc_sdcc_2 = { > + .id = 81, > + .name = "mas-pnoc-sdcc-2", > + .links = { &pnoc_int_1.node }, > + .num_links = 1, > + .port = 8, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node pnoc_snoc_mas = { > + .id = 10010, > + .name = "pnoc-snoc-mas", > + .links = { &pnoc_snoc_slv.node }, > + .num_links = 1, > + .buswidth = 8, > +}; > + > +static struct qcom_interconnect_node *msm8916_pnoc_nodes[] = { > + [PNOC_INT_1] = &pnoc_int_1, > + [MAS_PNOC_SDCC_1] = &mas_pnoc_sdcc_1, > + [MAS_PNOC_SDCC_2] = &mas_pnoc_sdcc_2, > + [PNOC_SNOC_MAS] = &pnoc_snoc_mas, > +}; There are big holes in this node array definition because the index values are not contiguous. Are you planning fill these in later for each of the providers? > +static struct qcom_interconnect_desc msm8916_pnoc = { > + .nodes = msm8916_pnoc_nodes, > + .num_nodes = ARRAY_SIZE(msm8916_pnoc_nodes), > +}; > + > +static int qcom_interconnect_init(struct interconnect_node *node) > +{ > + struct qcom_interconnect_node *qn = to_qcom_node(node); > + > + /* populate default values */ > + if (!qn->buswidth) > + qn->buswidth = 8; > + > + /* TODO: init qos and priority */ > + > + return 0;
Hi Amit, On 11/02/2017 09:28 AM, Amit Kucheria wrote: > On Fri, Sep 8, 2017 at 10:48 PM, Georgi Djakov <georgi.djakov@linaro.org> wrote: >> Add driver for the Qualcomm interconnect buses found in msm8916 based >> platforms. This patch contains only a partial topology to make reviewing >> easier. >> >> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> >> --- >> drivers/interconnect/Kconfig | 5 + >> drivers/interconnect/Makefile | 1 + >> drivers/interconnect/qcom/Kconfig | 11 + >> drivers/interconnect/qcom/Makefile | 1 + >> drivers/interconnect/qcom/interconnect_msm8916.c | 375 +++++++++++++++++++++++ >> include/linux/interconnect/qcom-msm8916.h | 92 ++++++ >> 6 files changed, 485 insertions(+) >> create mode 100644 drivers/interconnect/qcom/Kconfig >> create mode 100644 drivers/interconnect/qcom/Makefile >> create mode 100644 drivers/interconnect/qcom/interconnect_msm8916.c >> create mode 100644 include/linux/interconnect/qcom-msm8916.h >> >> diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig >> index 1e50e951cdc1..b123a76e2f9d 100644 >> --- a/drivers/interconnect/Kconfig >> +++ b/drivers/interconnect/Kconfig >> @@ -8,3 +8,8 @@ menuconfig INTERCONNECT >> >> If unsure, say no. >> >> +if INTERCONNECT >> + >> +source "drivers/interconnect/qcom/Kconfig" >> + >> +endif >> diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile >> index d9da6a6c3560..62a01de24aeb 100644 >> --- a/drivers/interconnect/Makefile >> +++ b/drivers/interconnect/Makefile >> @@ -1 +1,2 @@ >> obj-$(CONFIG_INTERCONNECT) += interconnect.o >> +obj-$(CONFIG_INTERCONNECT_QCOM) += qcom/ >> diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig >> new file mode 100644 >> index 000000000000..86465dc37bd4 >> --- /dev/null >> +++ b/drivers/interconnect/qcom/Kconfig >> @@ -0,0 +1,11 @@ >> +config INTERCONNECT_QCOM >> + bool "Qualcomm Network-on-Chip interconnect drivers" >> + depends on INTERCONNECT >> + depends on ARCH_QCOM || COMPILE_TEST >> + default y >> + >> +config INTERCONNECT_QCOM_MSM8916 >> + tristate "Qualcomm MSM8916 interconnect driver" >> + depends on INTERCONNECT_QCOM >> + help >> + This is a driver for the Qualcomm Network-on-Chip on msm8916-based platforms. >> diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile >> new file mode 100644 >> index 000000000000..0831080e1100 >> --- /dev/null >> +++ b/drivers/interconnect/qcom/Makefile >> @@ -0,0 +1 @@ >> +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += interconnect_msm8916.o >> diff --git a/drivers/interconnect/qcom/interconnect_msm8916.c b/drivers/interconnect/qcom/interconnect_msm8916.c >> new file mode 100644 >> index 000000000000..9b001e100974 >> --- /dev/null >> +++ b/drivers/interconnect/qcom/interconnect_msm8916.c >> @@ -0,0 +1,375 @@ >> +/* >> + * Copyright (C) 2017 Linaro Ltd >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 and >> + * only version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >> + * GNU General Public License for more details. >> + */ >> + >> +#include <linux/clk.h> >> +#include <linux/device.h> >> +#include <linux/io.h> >> +#include <linux/interconnect-provider.h> >> +#include <linux/interconnect/qcom-msm8916.h> >> +#include <linux/module.h> >> +#include <linux/of_device.h> >> +#include <linux/of_platform.h> >> +#include <linux/platform_device.h> >> +#include <linux/slab.h> >> + >> +#define to_qcom_icp(_icp) \ >> + container_of(_icp, struct qcom_interconnect_provider, icp) >> +#define to_qcom_node(_node) \ >> + container_of(_node, struct qcom_interconnect_node, node) >> + >> +enum qcom_bus_type { >> + QCOM_BUS_TYPE_NOC = 0, >> + QCOM_BUS_TYPE_MEM, >> +}; >> + >> +struct qcom_interconnect_provider { >> + struct icp icp; >> + void __iomem *base; >> + struct clk *bus_clk; >> + struct clk *bus_a_clk; >> + u32 base_offset; >> + u32 qos_offset; >> + enum qcom_bus_type type; >> +}; >> + >> +struct qcom_interconnect_node { >> + struct interconnect_node node; >> + unsigned char *name; >> + struct interconnect_node *links[8]; > > Magic number 8. Replace with 8916_MAX_LINKS or something. > Ok, sure! >> + u16 id; >> + u16 num_links; >> + u16 port; >> + u16 buswidth; > > Comment on what a buswidth is just to be clear > Ok! >> + u64 rate; > > Comment on units Ok! > >> +}; >> + >> +static struct qcom_interconnect_node snoc_int_0; >> +static struct qcom_interconnect_node snoc_int_1; >> +static struct qcom_interconnect_node snoc_int_bimc; >> +static struct qcom_interconnect_node snoc_bimc_0_mas; >> +static struct qcom_interconnect_node pnoc_snoc_slv; >> + >> +static struct qcom_interconnect_node snoc_bimc_0_slv; > > IMO, saving an 'a' and 'e' is not worth it for the sake of > readability. Just use 'slave' and 'master' in the names. > Currently i prefer to keep it this way. Maybe i can put a comment somewhere. >> +static struct qcom_interconnect_node slv_ebi_ch0; >> + >> +static struct qcom_interconnect_node pnoc_int_1; >> +static struct qcom_interconnect_node mas_pnoc_sdcc_1; >> +static struct qcom_interconnect_node mas_pnoc_sdcc_2; >> +static struct qcom_interconnect_node pnoc_snoc_mas; >> + >> +struct qcom_interconnect_desc { >> + struct qcom_interconnect_node **nodes; >> + size_t num_nodes; >> +}; >> + >> +static struct qcom_interconnect_node snoc_int_0 = { >> + .id = 10004, >> + .name = "snoc-int-0", >> +#if 0 > > Please get rid if these. > I have included only a small part of the topology for this SoC for simplicity. Will remove them. >> + .links = { &snoc_pnoc_mas.node }, >> + .num_links = 1, >> +#endif >> + .buswidth = 8, >> +}; >> + >> +static struct qcom_interconnect_node snoc_int_1 = { >> + .id = 10005, >> + .name = "snoc-int-1", >> +#if 0 >> + .links = { &slv_apss.node, &slv_cats_0.node, &slv_cats_1.node }, >> + .num_links = 3, >> +#endif >> + .buswidth = 8, >> +}; >> + >> +static struct qcom_interconnect_node snoc_int_bimc = { >> + .id = 10006, >> + .name = "snoc-bimc", >> + .links = { &snoc_bimc_0_mas.node }, >> + .num_links = 1, >> + .buswidth = 8, >> +}; >> + >> +static struct qcom_interconnect_node snoc_bimc_0_mas = { >> + .id = 10007, >> + .name = "snoc-bimc-0-mas", >> + .links = { &snoc_bimc_0_slv.node }, >> + .num_links = 1, >> + .buswidth = 8, >> +}; >> + >> +static struct qcom_interconnect_node pnoc_snoc_slv = { >> + .id = 10011, >> + .name = "snoc-pnoc", >> + .links = { &snoc_int_0.node, &snoc_int_bimc.node, &snoc_int_1.node }, >> + .num_links = 3, >> + .buswidth = 8, >> +}; > > > Suggest replacing this list of definitions with a macro such as: > > #define DEFINE_XCON_NODE(_name, _id, numlinks, buswidth, ...) \ > static struct qcom_interconnect_node _name; \ > static struct qcom_interconnect_node _name = { \ > .id = _id, > \ > .name = _name, > \ > .buswidth = buswidth, > \ > .num_links = numlinks, > \ > .links = { __VA_ARGS__ }, > \ > }; > > > This will reduce these definitions to a series of definitions as > follows that improves readability. > > DEFINE_XCON_NODE(snoc_int_0, 10004, 1, 8, &snoc_pnoc_mas.node) > DEFINE_XCON_NODE(snoc_int_1, 10005, 3, 8, &snoc_apss.node, > &slv_cats_0.node, &slv_cats_1.node) > DEFINE_XCON_NODE(snoc_int_bimc, 10006, 1, 8, &snoc_bimc_0_mas.node) > > If fact you could take it one step further and move the definitions > under the provider definition below directly. > Will do it. Thanks! [..] >> +static struct qcom_interconnect_node *msm8916_pnoc_nodes[] = { >> + [PNOC_INT_1] = &pnoc_int_1, >> + [MAS_PNOC_SDCC_1] = &mas_pnoc_sdcc_1, >> + [MAS_PNOC_SDCC_2] = &mas_pnoc_sdcc_2, >> + [PNOC_SNOC_MAS] = &pnoc_snoc_mas, >> +}; > > There are big holes in this node array definition because the index > values are not contiguous. Are you planning fill these in later for > each of the providers? > Yes, exactly. I trying to keep this patch as small as possible to be more review friendly. At some time will add the full topology. Thanks for the comments! BR, Georgi
diff --git a/drivers/interconnect/Kconfig b/drivers/interconnect/Kconfig index 1e50e951cdc1..b123a76e2f9d 100644 --- a/drivers/interconnect/Kconfig +++ b/drivers/interconnect/Kconfig @@ -8,3 +8,8 @@ menuconfig INTERCONNECT If unsure, say no. +if INTERCONNECT + +source "drivers/interconnect/qcom/Kconfig" + +endif diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile index d9da6a6c3560..62a01de24aeb 100644 --- a/drivers/interconnect/Makefile +++ b/drivers/interconnect/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_INTERCONNECT) += interconnect.o +obj-$(CONFIG_INTERCONNECT_QCOM) += qcom/ diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig new file mode 100644 index 000000000000..86465dc37bd4 --- /dev/null +++ b/drivers/interconnect/qcom/Kconfig @@ -0,0 +1,11 @@ +config INTERCONNECT_QCOM + bool "Qualcomm Network-on-Chip interconnect drivers" + depends on INTERCONNECT + depends on ARCH_QCOM || COMPILE_TEST + default y + +config INTERCONNECT_QCOM_MSM8916 + tristate "Qualcomm MSM8916 interconnect driver" + depends on INTERCONNECT_QCOM + help + This is a driver for the Qualcomm Network-on-Chip on msm8916-based platforms. diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile new file mode 100644 index 000000000000..0831080e1100 --- /dev/null +++ b/drivers/interconnect/qcom/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_INTERCONNECT_QCOM_MSM8916) += interconnect_msm8916.o diff --git a/drivers/interconnect/qcom/interconnect_msm8916.c b/drivers/interconnect/qcom/interconnect_msm8916.c new file mode 100644 index 000000000000..9b001e100974 --- /dev/null +++ b/drivers/interconnect/qcom/interconnect_msm8916.c @@ -0,0 +1,375 @@ +/* + * Copyright (C) 2017 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/interconnect-provider.h> +#include <linux/interconnect/qcom-msm8916.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define to_qcom_icp(_icp) \ + container_of(_icp, struct qcom_interconnect_provider, icp) +#define to_qcom_node(_node) \ + container_of(_node, struct qcom_interconnect_node, node) + +enum qcom_bus_type { + QCOM_BUS_TYPE_NOC = 0, + QCOM_BUS_TYPE_MEM, +}; + +struct qcom_interconnect_provider { + struct icp icp; + void __iomem *base; + struct clk *bus_clk; + struct clk *bus_a_clk; + u32 base_offset; + u32 qos_offset; + enum qcom_bus_type type; +}; + +struct qcom_interconnect_node { + struct interconnect_node node; + unsigned char *name; + struct interconnect_node *links[8]; + u16 id; + u16 num_links; + u16 port; + u16 buswidth; + u64 rate; +}; + +static struct qcom_interconnect_node snoc_int_0; +static struct qcom_interconnect_node snoc_int_1; +static struct qcom_interconnect_node snoc_int_bimc; +static struct qcom_interconnect_node snoc_bimc_0_mas; +static struct qcom_interconnect_node pnoc_snoc_slv; + +static struct qcom_interconnect_node snoc_bimc_0_slv; +static struct qcom_interconnect_node slv_ebi_ch0; + +static struct qcom_interconnect_node pnoc_int_1; +static struct qcom_interconnect_node mas_pnoc_sdcc_1; +static struct qcom_interconnect_node mas_pnoc_sdcc_2; +static struct qcom_interconnect_node pnoc_snoc_mas; + +struct qcom_interconnect_desc { + struct qcom_interconnect_node **nodes; + size_t num_nodes; +}; + +static struct qcom_interconnect_node snoc_int_0 = { + .id = 10004, + .name = "snoc-int-0", +#if 0 + .links = { &snoc_pnoc_mas.node }, + .num_links = 1, +#endif + .buswidth = 8, +}; + +static struct qcom_interconnect_node snoc_int_1 = { + .id = 10005, + .name = "snoc-int-1", +#if 0 + .links = { &slv_apss.node, &slv_cats_0.node, &slv_cats_1.node }, + .num_links = 3, +#endif + .buswidth = 8, +}; + +static struct qcom_interconnect_node snoc_int_bimc = { + .id = 10006, + .name = "snoc-bimc", + .links = { &snoc_bimc_0_mas.node }, + .num_links = 1, + .buswidth = 8, +}; + +static struct qcom_interconnect_node snoc_bimc_0_mas = { + .id = 10007, + .name = "snoc-bimc-0-mas", + .links = { &snoc_bimc_0_slv.node }, + .num_links = 1, + .buswidth = 8, +}; + +static struct qcom_interconnect_node pnoc_snoc_slv = { + .id = 10011, + .name = "snoc-pnoc", + .links = { &snoc_int_0.node, &snoc_int_bimc.node, &snoc_int_1.node }, + .num_links = 3, + .buswidth = 8, +}; + +static struct qcom_interconnect_node *msm8916_snoc_nodes[] = { + [SNOC_INT_0] = &snoc_int_0, + [SNOC_INT_1] = &snoc_int_1, + [SNOC_INT_BIMC] = &snoc_int_bimc, + [SNOC_BIMC_0_MAS] = &snoc_bimc_0_mas, + [PNOC_SNOC_SLV] = &pnoc_snoc_slv, +}; + +static struct qcom_interconnect_desc msm8916_snoc = { + .nodes = msm8916_snoc_nodes, + .num_nodes = ARRAY_SIZE(msm8916_snoc_nodes), +}; + +static struct qcom_interconnect_node snoc_bimc_0_slv = { + .id = 10025, + .name = "snoc_bimc_0_slv", + .links = { &slv_ebi_ch0.node }, + .num_links = 1, + .buswidth = 8, +}; + +static struct qcom_interconnect_node slv_ebi_ch0 = { + .id = 512, + .name = "slv-ebi-ch0", + .buswidth = 8, +}; + +static struct qcom_interconnect_node *msm8916_bimc_nodes[] = { + [SNOC_BIMC_0_SLV] = &snoc_bimc_0_slv, + [SLV_EBI_CH0] = &slv_ebi_ch0, +}; + +static struct qcom_interconnect_desc msm8916_bimc = { + .nodes = msm8916_bimc_nodes, + .num_nodes = ARRAY_SIZE(msm8916_bimc_nodes), +}; + +static struct qcom_interconnect_node pnoc_int_1 = { + .id = 10013, + .name = "pnoc-int-1", + .links = { &pnoc_snoc_mas.node }, + .num_links = 1, + .buswidth = 8, +}; + +static struct qcom_interconnect_node mas_pnoc_sdcc_1 = { + .id = 78, + .name = "mas-pnoc-sdcc-1", + .links = { &pnoc_int_1.node }, + .num_links = 1, + .port = 7, + .buswidth = 8, +}; + +static struct qcom_interconnect_node mas_pnoc_sdcc_2 = { + .id = 81, + .name = "mas-pnoc-sdcc-2", + .links = { &pnoc_int_1.node }, + .num_links = 1, + .port = 8, + .buswidth = 8, +}; + +static struct qcom_interconnect_node pnoc_snoc_mas = { + .id = 10010, + .name = "pnoc-snoc-mas", + .links = { &pnoc_snoc_slv.node }, + .num_links = 1, + .buswidth = 8, +}; + +static struct qcom_interconnect_node *msm8916_pnoc_nodes[] = { + [PNOC_INT_1] = &pnoc_int_1, + [MAS_PNOC_SDCC_1] = &mas_pnoc_sdcc_1, + [MAS_PNOC_SDCC_2] = &mas_pnoc_sdcc_2, + [PNOC_SNOC_MAS] = &pnoc_snoc_mas, +}; + +static struct qcom_interconnect_desc msm8916_pnoc = { + .nodes = msm8916_pnoc_nodes, + .num_nodes = ARRAY_SIZE(msm8916_pnoc_nodes), +}; + +static int qcom_interconnect_init(struct interconnect_node *node) +{ + struct qcom_interconnect_node *qn = to_qcom_node(node); + + /* populate default values */ + if (!qn->buswidth) + qn->buswidth = 8; + + /* TODO: init qos and priority */ + + return 0; +} + +static int qcom_interconnect_set(struct interconnect_node *src, + struct interconnect_node *dst, + struct interconnect_creq *creq) +{ + struct qcom_interconnect_provider *qicp; + struct qcom_interconnect_node *qn; + struct interconnect_node *node; + struct icp *icp; + u64 rate = 0; + int ret = 0; + + if (!src && !dst) + return -ENODEV; + + if (!src) + node = dst; + else + node = src; + + qn = to_qcom_node(node); + icp = qn->node.icp; + qicp = to_qcom_icp(node->icp); + + rate = max(icp->creq.avg_bw, icp->creq.peak_bw); + + do_div(rate, qn->buswidth); + + if (qn->rate != rate) { + ret = clk_set_rate(qicp->bus_clk, rate); + if (ret) { + pr_err("set clk rate %lld error %d\n", rate, ret); + return ret; + } + + ret = clk_set_rate(qicp->bus_a_clk, rate); + if (ret) { + pr_err("set clk rate %lld error %d\n", rate, ret); + return ret; + } + + qn->rate = rate; + } + + return ret; +} + +struct interconnect_onecell_data { + struct interconnect_node **nodes; + unsigned int num_nodes; +}; + +static const struct icp_ops qcom_ops = { + .set = qcom_interconnect_set, +}; + +static int qnoc_probe(struct platform_device *pdev) +{ + struct qcom_interconnect_provider *qicp; + struct icp *icp; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct resource *res; + void __iomem *base; + struct clk *bus_clk, *bus_a_clk; + size_t num_nodes, i; + const struct qcom_interconnect_desc *desc; + struct qcom_interconnect_node **qnodes; + u32 type, base_offset, qos_offset; + + desc = of_device_get_match_data(&pdev->dev); + if (!desc) + return -EINVAL; + + qnodes = desc->nodes; + num_nodes = desc->num_nodes; + + qicp = devm_kzalloc(dev, sizeof(*qicp), GFP_KERNEL); + if (!qicp) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + bus_clk = devm_clk_get(&pdev->dev, "bus_clk"); + if (IS_ERR(bus_clk)) + return PTR_ERR(bus_clk); + bus_a_clk = devm_clk_get(&pdev->dev, "bus_a_clk"); + if (IS_ERR(bus_a_clk)) + return PTR_ERR(bus_a_clk); + + of_property_read_u32(np, "type", &type); + of_property_read_u32(np, "base-offset", &base_offset); + of_property_read_u32(np, "qos-offset", &qos_offset); + + qicp->base = base; + qicp->type = type; + qicp->base_offset = base_offset; + qicp->qos_offset = qos_offset; + qicp->bus_clk = bus_clk; + qicp->bus_a_clk = bus_a_clk; + icp = &qicp->icp; + icp->dev = dev; + icp->ops = &qcom_ops; + INIT_LIST_HEAD(&icp->nodes); + + for (i = 0; i < num_nodes; i++) { + struct interconnect_node *node; + int ret; + size_t j; + + if (!qnodes[i]) + continue; + + node = &qnodes[i]->node; + node->dev_id = kstrdup_const(qnodes[i]->name, GFP_KERNEL); + node->con_id = qnodes[i]->id; + node->icp = icp; + node->num_links = qnodes[i]->num_links; + node->links = devm_kcalloc(dev, node->num_links, + sizeof(*node->links), GFP_KERNEL); + if (!node->links) + return -ENOMEM; + + /* populate links */ + for (j = 0; j < node->num_links; j++) + node->links[j] = qnodes[i]->links[j]; + + /* add the node to interconnect provider */ + list_add_tail(&node->icn_list, &icp->nodes); + dev_dbg(&pdev->dev, "registered node %p %s %d\n", node, + node->dev_id, node->con_id); + + ret = qcom_interconnect_init(node); + if (ret) + dev_err(&pdev->dev, "node init error (%d)\n", ret); + } + + return interconnect_add_provider(icp); +} + +static const struct of_device_id qnoc_of_match[] = { + { .compatible = "qcom,msm8916-pnoc", .data = &msm8916_pnoc }, + { .compatible = "qcom,msm8916-snoc", .data = &msm8916_snoc }, + { .compatible = "qcom,msm8916-bimc", .data = &msm8916_bimc }, + { }, +}; +MODULE_DEVICE_TABLE(of, qnoc_of_match); + +static struct platform_driver qnoc_driver = { + .probe = qnoc_probe, + .driver = { + .name = "qnoc-msm8916", + .of_match_table = qnoc_of_match, + }, +}; +module_platform_driver(qnoc_driver); +MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>"); +MODULE_DESCRIPTION("Qualcomm msm8916 NoC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/interconnect/qcom-msm8916.h b/include/linux/interconnect/qcom-msm8916.h new file mode 100644 index 000000000000..355582a09bea --- /dev/null +++ b/include/linux/interconnect/qcom-msm8916.h @@ -0,0 +1,92 @@ +#ifndef __LINUX_INTERCONNECT_QCOM_NOC_H +#define __LINUX_INTERCONNECT_QCOM_NOC_H + +#define MAS_VIDEO 0 +#define MAS_JPEG 1 +#define MAS_VFE 2 +#define MAS_MDP 3 +#define MAS_QDSS_BAM 4 +#define MAS_SNOC_CFG 5 +#define MAS_QDSS_ETR 6 +#define MM_INT_0 7 +#define MM_INT_1 8 +#define MM_INT_2 9 +#define MM_INT_BIMC 10 +#define SNOC_INT_0 11 +#define SNOC_INT_1 12 +#define SNOC_INT_BIMC 13 +#define SNOC_BIMC_0_MAS 14 +#define SNOC_BIMC_1_MAS 15 +#define QDSS_INT 16 +#define BIMC_SNOC_SLV 17 +#define SNOC_PNOC_MAS 18 +#define PNOC_SNOC_SLV 19 +#define SLV_SRVC_SNOC 20 +#define SLV_QDSS_STM 21 +#define SLV_IMEM 22 +#define SLV_APSS 23 +#define SLV_CATS_0 24 +#define SLV_CATS_1 25 + +#define MAS_APPS 0 +#define MAS_TCU0 1 +#define MAS_TCU1 2 +#define MAS_GFX 3 +#define BIMC_SNOC_MAS 4 +#define SNOC_BIMC_0_SLV 5 +#define SNOC_BIMC_1_SLV 6 +#define SLV_EBI_CH0 7 +#define SLV_APPS_L2 8 + +#define SNOC_PNOC_SLV 0 +#define PNOC_INT_0 1 +#define PNOC_INT_1 2 +#define PNOC_M_0 3 +#define PNOC_M_1 4 +#define PNOC_S_0 5 +#define PNOC_S_1 6 +#define PNOC_S_2 7 +#define PNOC_S_3 8 +#define PNOC_S_4 9 +#define PNOC_S_8 10 +#define PNOC_S_9 11 +#define SLV_IMEM_CFG 12 +#define SLV_CRYPTO_0_CFG 13 +#define SLV_MSG_RAM 14 +#define SLV_PDM 15 +#define SLV_PRNG 16 +#define SLV_CLK_CTL 17 +#define SLV_MSS 18 +#define SLV_TLMM 19 +#define SLV_TCSR 20 +#define SLV_SECURITY 21 +#define SLV_SPDM 22 +#define SLV_PNOC_CFG 23 +#define SLV_PMIC_ARB 24 +#define SLV_BIMC_CFG 25 +#define SLV_BOOT_ROM 26 +#define SLV_MPM 27 +#define SLV_QDSS_CFG 28 +#define SLV_RBCPR_CFG 29 +#define SLV_SNOC_CFG 30 +#define SLV_DEHR_CFG 31 +#define SLV_VENUS_CFG 32 +#define SLV_DISPLAY_CFG 33 +#define SLV_CAMERA_CFG 34 +#define SLV_USB_HS 35 +#define SLV_SDCC_1 36 +#define SLV_BLSP_1 37 +#define SLV_SDCC_2 38 +#define SLV_GFX_CFG 39 +#define SLV_AUDIO 40 +#define MAS_BLSP_1 41 +#define MAS_SPDM 42 +#define MAS_DEHR 43 +#define MAS_AUDIO 44 +#define MAS_USB_HS 45 +#define MAS_PNOC_CRYPTO_0 46 +#define MAS_PNOC_SDCC_1 47 +#define MAS_PNOC_SDCC_2 48 +#define PNOC_SNOC_MAS 49 + +#endif
Add driver for the Qualcomm interconnect buses found in msm8916 based platforms. This patch contains only a partial topology to make reviewing easier. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- drivers/interconnect/Kconfig | 5 + drivers/interconnect/Makefile | 1 + drivers/interconnect/qcom/Kconfig | 11 + drivers/interconnect/qcom/Makefile | 1 + drivers/interconnect/qcom/interconnect_msm8916.c | 375 +++++++++++++++++++++++ include/linux/interconnect/qcom-msm8916.h | 92 ++++++ 6 files changed, 485 insertions(+) create mode 100644 drivers/interconnect/qcom/Kconfig create mode 100644 drivers/interconnect/qcom/Makefile create mode 100644 drivers/interconnect/qcom/interconnect_msm8916.c create mode 100644 include/linux/interconnect/qcom-msm8916.h