| Message ID | 20170918075814.27405-5-antoine.tenart@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Antoine, On lun., sept. 18 2017, Antoine Tenart <antoine.tenart@free-electrons.com> wrote: > This patch describes the comphy available in the cp110 master and slave. > This comphy provides serdes lanes used by various controllers such as > the network one. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Applied on mvebu/dt64 Thanks, Gregory > --- > .../boot/dts/marvell/armada-cp110-master.dtsi | 38 ++++++++++++++++++++++ > .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 38 ++++++++++++++++++++++ > 2 files changed, 76 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi > index faf7d4a497aa..a26948ff72b4 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi > @@ -109,6 +109,44 @@ > }; > }; > > + cpm_comphy: phy@120000 { > + compatible = "marvell,comphy-cp110"; > + reg = <0x120000 0x6000>; > + marvell,system-controller = <&cpm_syscon0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpm_comphy0: phy@0 { > + reg = <0>; > + #phy-cells = <1>; > + }; > + > + cpm_comphy1: phy@1 { > + reg = <1>; > + #phy-cells = <1>; > + }; > + > + cpm_comphy2: phy@2 { > + reg = <2>; > + #phy-cells = <1>; > + }; > + > + cpm_comphy3: phy@3 { > + reg = <3>; > + #phy-cells = <1>; > + }; > + > + cpm_comphy4: phy@4 { > + reg = <4>; > + #phy-cells = <1>; > + }; > + > + cpm_comphy5: phy@5 { > + reg = <5>; > + #phy-cells = <1>; > + }; > + }; > + > cpm_mdio: mdio@12a200 { > #address-cells = <1>; > #size-cells = <0>; > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > index 02d6e2f1a7bf..fe326074edb6 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > @@ -109,6 +109,44 @@ > }; > }; > > + cps_comphy: phy@120000 { > + compatible = "marvell,comphy-cp110"; > + reg = <0x120000 0x6000>; > + marvell,system-controller = <&cps_syscon0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + cps_comphy0: phy@0 { > + reg = <0>; > + #phy-cells = <1>; > + }; > + > + cps_comphy1: phy@1 { > + reg = <1>; > + #phy-cells = <1>; > + }; > + > + cps_comphy2: phy@2 { > + reg = <2>; > + #phy-cells = <1>; > + }; > + > + cps_comphy3: phy@3 { > + reg = <3>; > + #phy-cells = <1>; > + }; > + > + cps_comphy4: phy@4 { > + reg = <4>; > + #phy-cells = <1>; > + }; > + > + cps_comphy5: phy@5 { > + reg = <5>; > + #phy-cells = <1>; > + }; > + }; > + > cps_mdio: mdio@12a200 { > #address-cells = <1>; > #size-cells = <0>; > -- > 2.13.5 >
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index faf7d4a497aa..a26948ff72b4 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -109,6 +109,44 @@ }; }; + cpm_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cpm_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cpm_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cpm_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + cpm_comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + cpm_comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + cpm_comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + cpm_comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + cpm_mdio: mdio@12a200 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 02d6e2f1a7bf..fe326074edb6 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -109,6 +109,44 @@ }; }; + cps_comphy: phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&cps_syscon0>; + #address-cells = <1>; + #size-cells = <0>; + + cps_comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + cps_comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + cps_comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + cps_comphy3: phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + cps_comphy4: phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + cps_comphy5: phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + cps_mdio: mdio@12a200 { #address-cells = <1>; #size-cells = <0>;
This patch describes the comphy available in the cp110 master and slave. This comphy provides serdes lanes used by various controllers such as the network one. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> --- .../boot/dts/marvell/armada-cp110-master.dtsi | 38 ++++++++++++++++++++++ .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 38 ++++++++++++++++++++++ 2 files changed, 76 insertions(+)