diff mbox

[7/7] ARM64: dts: meson-gxl: adjust libretech-cc gpio-line-names

Message ID 20170921171604.27675-1-jbrunet@baylibre.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jerome Brunet Sept. 21, 2017, 5:16 p.m. UTC
TEST_N gpio has been moved so the gpio-line-names of the cc
must be adjusted accordingly

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Neil Armstrong Oct. 20, 2017, 8:09 a.m. UTC | #1
On 21/09/2017 19:16, Jerome Brunet wrote:
> TEST_N gpio has been moved so the gpio-line-names of the cc
> must be adjusted accordingly
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> index 69ca14ac10fa..3e9b9c8b72f0 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
> @@ -146,7 +146,9 @@
>  			  "7J1 Header Pin12",
>  			  "IR In",
>  			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
> -			  "7J1 Header Pin13";
> +			  "7J1 Header Pin13",
> +			  /* GPIO_TEST_N */
> +			  "7J1 Header Pin15";
>  };
>  
>  &pinctrl_periphs {
> @@ -188,9 +190,7 @@
>  			  "7J1 Header Pin32", "7J1 Header Pin29",
>  			  "7J1 Header Pin31",
>  			  /* Bank GPIOCLK */
> -			  "7J1 Header Pin7", "",
> -			  /* GPIO_TEST_N */
> -			  "7J1 Header Pin15";
> +			  "7J1 Header Pin7", "";
>  };
>  
>  /* SD card */
> 

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 69ca14ac10fa..3e9b9c8b72f0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -146,7 +146,9 @@ 
 			  "7J1 Header Pin12",
 			  "IR In",
 			  "9J3 Switch HDMI CEC/7J1 Header Pin11",
-			  "7J1 Header Pin13";
+			  "7J1 Header Pin13",
+			  /* GPIO_TEST_N */
+			  "7J1 Header Pin15";
 };
 
 &pinctrl_periphs {
@@ -188,9 +190,7 @@ 
 			  "7J1 Header Pin32", "7J1 Header Pin29",
 			  "7J1 Header Pin31",
 			  /* Bank GPIOCLK */
-			  "7J1 Header Pin7", "",
-			  /* GPIO_TEST_N */
-			  "7J1 Header Pin15";
+			  "7J1 Header Pin7", "";
 };
 
 /* SD card */