| Message ID | 20170926000931.670-6-f.fainelli@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Sep 25, 2017 at 8:09 PM, Florian Fainelli <f.fainelli@gmail.com> wrote: > Add support for the Broadcom Hurricane 2 SoC clock controller. We can > re-use the existing iProc clock library since the SoC's architecture is > largely the same as its predecessors. > > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> > --- > drivers/clk/bcm/Kconfig | 9 +++++++++ > drivers/clk/bcm/Makefile | 1 + > drivers/clk/bcm/clk-hr2.c | 27 +++++++++++++++++++++++++++ > 3 files changed, 37 insertions(+) > create mode 100644 drivers/clk/bcm/clk-hr2.c > > diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig > index 1d9187df167b..4c4bd85f707c 100644 > --- a/drivers/clk/bcm/Kconfig > +++ b/drivers/clk/bcm/Kconfig > @@ -30,6 +30,15 @@ config CLK_BCM_CYGNUS > help > Enable common clock framework support for the Broadcom Cygnus SoC > > +config CLK_BCM_HR2 > + bool "Broadcom Hurricane 2 clock support" > + depends on ARCH_BCM_HR2 || COMPILE_TEST > + select COMMON_CLK_IPROC > + default ARCH_BCM_HR2 > + help > + Enable common clock framework support for the Broadcom Hurricane 2 > + SoC > + > config CLK_BCM_NSP > bool "Broadcom Northstar/Northstar Plus clock support" > depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST > diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile > index a0c14fa4aa1e..755144195541 100644 > --- a/drivers/clk/bcm/Makefile > +++ b/drivers/clk/bcm/Makefile > @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o > obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o > obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o > obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o > +obj-$(CONFIG_CLK_BCM_HR2) += clk-hr2.o > obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o > obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o > obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o > diff --git a/drivers/clk/bcm/clk-hr2.c b/drivers/clk/bcm/clk-hr2.c > new file mode 100644 > index 000000000000..f7c5b7379475 > --- /dev/null > +++ b/drivers/clk/bcm/clk-hr2.c > @@ -0,0 +1,27 @@ > +/* > + * Copyright (C) 2017 Broadcom > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation version 2. > + * > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any > + * kind, whether express or implied; without even the implied warranty > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + */ > + > +#include <linux/kernel.h> > +#include <linux/err.h> > +#include <linux/clk-provider.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > + > +#include "clk-iproc.h" > + > +static void __init hr2_armpll_init(struct device_node *node) > +{ > + iproc_armpll_setup(node); > +} > +CLK_OF_DECLARE(hr2_armpll, "brcm,hr2-armpll", hr2_armpll_init); > -- > 2.14.1 Per our offline conversation, the LCPLL in HR2 looks to be completely different than anything on NS/NSP/NS2 product line. So, that will need a new driver. Given that this is sufficient to get the HR2 board working, then it is acceptable to me. Thanks, Jon
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index 1d9187df167b..4c4bd85f707c 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -30,6 +30,15 @@ config CLK_BCM_CYGNUS help Enable common clock framework support for the Broadcom Cygnus SoC +config CLK_BCM_HR2 + bool "Broadcom Hurricane 2 clock support" + depends on ARCH_BCM_HR2 || COMPILE_TEST + select COMMON_CLK_IPROC + default ARCH_BCM_HR2 + help + Enable common clock framework support for the Broadcom Hurricane 2 + SoC + config CLK_BCM_NSP bool "Broadcom Northstar/Northstar Plus clock support" depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index a0c14fa4aa1e..755144195541 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o +obj-$(CONFIG_CLK_BCM_HR2) += clk-hr2.o obj-$(CONFIG_CLK_BCM_NSP) += clk-nsp.o obj-$(CONFIG_CLK_BCM_NS2) += clk-ns2.o obj-$(CONFIG_CLK_BCM_SR) += clk-sr.o diff --git a/drivers/clk/bcm/clk-hr2.c b/drivers/clk/bcm/clk-hr2.c new file mode 100644 index 000000000000..f7c5b7379475 --- /dev/null +++ b/drivers/clk/bcm/clk-hr2.c @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2017 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "clk-iproc.h" + +static void __init hr2_armpll_init(struct device_node *node) +{ + iproc_armpll_setup(node); +} +CLK_OF_DECLARE(hr2_armpll, "brcm,hr2-armpll", hr2_armpll_init);
Add support for the Broadcom Hurricane 2 SoC clock controller. We can re-use the existing iProc clock library since the SoC's architecture is largely the same as its predecessors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/clk/bcm/Kconfig | 9 +++++++++ drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-hr2.c | 27 +++++++++++++++++++++++++++ 3 files changed, 37 insertions(+) create mode 100644 drivers/clk/bcm/clk-hr2.c