| Message ID | 20171004064917.2498-5-joel@jms.id.au (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, 2017-10-04 at 17:19 +1030, Joel Stanley wrote: > Enable the buses that are in use and the devices that are attached. > Currently that is just the battery backed RTC. > > Some of these buses are for hotplugged cards, such as PCIe cards. Others > do not yet have upstream drivers, so there are no devices attached. > > Reviewed-by: Brendan Higgins <brendanhiggins@google.com> > Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> > --- > v2: > - Use okay not enabled for the status > --- > arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++ > 1 file changed, 54 insertions(+) > > diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > index 1190fec1b5d0..8b96baf7c4de 100644 > --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts > @@ -79,3 +79,57 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_rmii1_default>; > }; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > +}; > + > +&i2c4 { > + status = "okay"; > +}; > + > +&i2c5 { > + status = "okay"; > +}; > + > +&i2c6 { > + /* PCIe slot 1 (x8) */ > + status = "okay"; > +}; > + > +&i2c7 { > + /* PCIe slot 2 (x16) */ > + status = "okay"; > +}; > + > +&i2c8 { > + /* PCIe slot 3 (x16) */ > + status = "okay"; > +}; > + > +&i2c9 { > + /* PCIe slot 4 (x16) */ > + status = "okay"; > +}; > + > +&i2c10 { > + /* PCIe slot 5 (x8) */ > + status = "okay"; > +}; > + > +&i2c11 { > + status = "okay"; > + > + rtc@32 { > + compatible = "epson,rx8900"; > + reg = <0x32>; > + }; > +}; > + > +&i2c12 { > + status = "okay"; > +};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 1190fec1b5d0..8b96baf7c4de 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -79,3 +79,57 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rmii1_default>; }; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + /* PCIe slot 1 (x8) */ + status = "okay"; +}; + +&i2c7 { + /* PCIe slot 2 (x16) */ + status = "okay"; +}; + +&i2c8 { + /* PCIe slot 3 (x16) */ + status = "okay"; +}; + +&i2c9 { + /* PCIe slot 4 (x16) */ + status = "okay"; +}; + +&i2c10 { + /* PCIe slot 5 (x8) */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&i2c12 { + status = "okay"; +};