[1/2] mmc: sdhci-of-esdhc: Workaround for reducing the maximum speed on ls1021atwr

Commit Message

Yinbo Zhu Oct. 30, 2017, 8 a.m. UTC

From: "yinbo.zhu" <[e-mail]>

In SDHC high speed AC timing, the tshivkh parameter
is defined as input setup times:SDHC_CMD, SDHC_DATx,
to SDHC_CLK. The value of the tshivkh should be 2.5 ns
considering the round trip delay, board/data skew.
However, because of this erratum, it needs
at least 4.1 ns.

eSDHC cannot run at the maximum clock speed for the
high speed mode, or there is a limit on the length
of the trace on the board for data, command, and
clock lines of the SDHC.

Signed-off-by: yinbo.zhu <[e-mail]>
---
 drivers/mmc/host/sdhci-of-esdhc.c | 6 ++++++
 1 file changed, 6 insertions(+)

Patch

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index d96a057a7db8..aa360ff1fc35 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -498,6 +498,12 @@  static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 			clock -= 5000000;
 	}
 
+	/* Workaround to reduce the clock frequency for ls1021a esdhc */
+	if (of_find_compatible_node(NULL, NULL, "fsl,ls1021a")) {
+		if (clock == 50000000)
+			clock = 46500000;
+	}
+
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN |
 		  ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK);