diff mbox

[v2] arm: dts: ls1021a: fix the value of TMR_FIPER1

Message ID 20171129065458.4235-1-yangbo.lu@nxp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yangbo Lu Nov. 29, 2017, 6:54 a.m. UTC
The timer fixed interval period pulse generator register
is used to generate periodic pulses. The down count
register loads the value programmed in the fixed period
interval (FIPER). At every tick of the timer accumulator
overflow, the counter decrements by the value of
TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down
counter value reaches zero. It reloads the down counter
in the cycle following a pulse. To use the TMR_FIPER1
register to generate a 1 PPS event, the value
(10^9 nanoseconds) - TCLK_PERIOD should be programmed.
It should be 999999995 not 999999990 since TCLK_PERIOD
is 5.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
Changes for v2:
	- Added Shawn into cc list.
---
 arch/arm/boot/dts/ls1021a.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Shawn Guo Nov. 30, 2017, 12:29 a.m. UTC | #1
On Wed, Nov 29, 2017 at 02:54:58PM +0800, Yangbo Lu wrote:
> The timer fixed interval period pulse generator register
> is used to generate periodic pulses. The down count
> register loads the value programmed in the fixed period
> interval (FIPER). At every tick of the timer accumulator
> overflow, the counter decrements by the value of
> TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down
> counter value reaches zero. It reloads the down counter
> in the cycle following a pulse. To use the TMR_FIPER1
> register to generate a 1 PPS event, the value
> (10^9 nanoseconds) - TCLK_PERIOD should be programmed.
> It should be 999999995 not 999999990 since TCLK_PERIOD
> is 5.
> 
> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>


Again, for arm dts, we usually use prefix like 'ARM: dts: ...'

I fixed it up and applied the patch.

Shawn

> ---
> Changes for v2:
> 	- Added Shawn into cc list.
> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 64249726b3cb..a861a4b9e319 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -589,7 +589,7 @@
>  			fsl,tclk-period = <5>;
>  			fsl,tmr-prsc    = <2>;
>  			fsl,tmr-add     = <0xaaaaaaab>;
> -			fsl,tmr-fiper1  = <999999990>;
> +			fsl,tmr-fiper1  = <999999995>;
>  			fsl,tmr-fiper2  = <99990>;
>  			fsl,max-adj     = <499999999>;
>  		};
> -- 
> 2.14.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Yangbo Lu Dec. 18, 2017, 2:51 a.m. UTC | #2
Hi Shawn,

Sorry for bother. I just couldn’t find this patch on your git tree.
Could you help to check?
Thanks a lot.

Best regards,
Yangbo Lu

> -----Original Message-----

> From: Shawn Guo [mailto:shawnguo@kernel.org]

> Sent: 2017年11月30日 8:29

> To: Y.b. Lu <yangbo.lu@nxp.com>

> Cc: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;

> linux-arm-kernel@lists.infradead.org; Mark Rutland <mark.rutland@arm.com>;

> Rob Herring <robh+dt@kernel.org>; Russell King <linux@armlinux.org.uk>

> Subject: Re: [v2] arm: dts: ls1021a: fix the value of TMR_FIPER1

> 

> On Wed, Nov 29, 2017 at 02:54:58PM +0800, Yangbo Lu wrote:

> > The timer fixed interval period pulse generator register is used to

> > generate periodic pulses. The down count register loads the value

> > programmed in the fixed period interval (FIPER). At every tick of the

> > timer accumulator overflow, the counter decrements by the value of

> > TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter

> > value reaches zero. It reloads the down counter in the cycle following

> > a pulse. To use the TMR_FIPER1 register to generate a 1 PPS event, the

> > value

> > (10^9 nanoseconds) - TCLK_PERIOD should be programmed.

> > It should be 999999995 not 999999990 since TCLK_PERIOD is 5.

> >

> > Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>

> 

> 

> Again, for arm dts, we usually use prefix like 'ARM: dts: ...'

> 

> I fixed it up and applied the patch.

> 

> Shawn

> 

> > ---

> > Changes for v2:

> > 	- Added Shawn into cc list.

> > ---

> >  arch/arm/boot/dts/ls1021a.dtsi | 2 +-

> >  1 file changed, 1 insertion(+), 1 deletion(-)

> >

> > diff --git a/arch/arm/boot/dts/ls1021a.dtsi

> > b/arch/arm/boot/dts/ls1021a.dtsi index 64249726b3cb..a861a4b9e319

> > 100644

> > --- a/arch/arm/boot/dts/ls1021a.dtsi

> > +++ b/arch/arm/boot/dts/ls1021a.dtsi

> > @@ -589,7 +589,7 @@

> >  			fsl,tclk-period = <5>;

> >  			fsl,tmr-prsc    = <2>;

> >  			fsl,tmr-add     = <0xaaaaaaab>;

> > -			fsl,tmr-fiper1  = <999999990>;

> > +			fsl,tmr-fiper1  = <999999995>;

> >  			fsl,tmr-fiper2  = <99990>;

> >  			fsl,max-adj     = <499999999>;

> >  		};

> > --

> > 2.14.1

> >

> >

> > _______________________________________________

> > linux-arm-kernel mailing list

> > linux-arm-kernel@lists.infradead.org

> > https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist

> >

> s.infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C01%

> 7

> >

> Cyangbo.lu%40nxp.com%7C703a7f8c490745cac3d708d537896a63%7C686ea

> 1d3bc2b

> >

> 4c6fa92cd99c5c301635%7C0%7C0%7C636475985694945094&sdata=XLw6lJ

> ONCoo2jq

> > Hoixb%2BtlYTDcLC4tPbKWT3eQ7RI7c%3D&reserved=0
Shawn Guo Dec. 20, 2017, 3:33 a.m. UTC | #3
On Mon, Dec 18, 2017 at 02:51:06AM +0000, Y.b. Lu wrote:
> Hi Shawn,
> 
> Sorry for bother. I just couldn’t find this patch on your git tree.
> Could you help to check?

Sorry.  I forgot to push the update.  Just pushed now.

Shawn
diff mbox

Patch

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 64249726b3cb..a861a4b9e319 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -589,7 +589,7 @@ 
 			fsl,tclk-period = <5>;
 			fsl,tmr-prsc    = <2>;
 			fsl,tmr-add     = <0xaaaaaaab>;
-			fsl,tmr-fiper1  = <999999990>;
+			fsl,tmr-fiper1  = <999999995>;
 			fsl,tmr-fiper2  = <99990>;
 			fsl,max-adj     = <499999999>;
 		};